Date: Wed, 21 Jan 2015 19:20:06 +0100 From: Zsolt Udvari <udvzsolt@gmail.com> To: =?UTF-8?Q?M=C3=A4rk_Owen?= <markowen2206@gmail.com> Cc: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org> Subject: Re: SANE Network Scanner Message-ID: <CADtCJqqpS2Nm=yg_TXkrX0CTtqbaevy8XJaZqPYHr8sNKqjygQ@mail.gmail.com> In-Reply-To: <20150121175117.5712f713@MARC-THINKPAD.queenland> References: <20150121175117.5712f713@MARC-THINKPAD.queenland>
next in thread | previous in thread | raw e-mail | index | archive | help
Did you enable your client's IP in saned.conf? Check here: https://wiki.archlinux.org/index.php/Sane#Network_scanning I've done it with RPI, and followed ArchWiki - you don't need inetd. 2015-01-21 17:51 GMT+01:00 M=C3=A4rk Owen <markowen2206@gmail.com>: > Hi, > > I'm trying to share an Epson Perfection 3490 over the network through > SANE. I know it is supported because it worked on linux (Debian). The > host (FreeBSD 10.1) recognizes it and it seems to work if I invoke this > command: > > scanimage -d snapscan:libusb:/dev/usb:/dev/ugen1.3 --format pnm > > /tmp/outfile.pnm > > The issue is that my clients (all Debian 7 boxes) don't seem to be able > to detect the scanner over the network using xsane or the scanimage > -L / sane-find-scanner -q commands. > > Maybe some of you will be able to enlighten me. Here are the content of > a few configuration files from the server: > > /etc/rc.conf > inetd_enable=3D"YES" > saned_enable=3D"YES" > > /etc/services > sane-port 6566/tcp #SANE > > /etc/inetd.conf > sane-port stream tcp nowait > saned /usr/local/sbin/saned saned > > In /usr/local/etc/sane.d/dll.conf, everything is commented except > 'snapscan' as FreeBSD seems to detect the scanner as snapscan and not > epson. > > /usr/local/etc/sane.d/snapscan.conf > #------------------------------ General > ----------------------------------- > > # Change to the fully qualified filename of your firmware file, if > # firmware upload is needed by the scanner > firmware /usr/local/share/sane/snapscan/Esfw52.bin > > # If not automatically found you may manually specify a device name. > > # For USB scanners also specify bus=3Dusb, e.g. > # /dev/usb/scanner0 bus=3Dusb > > # For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux. > # /dev/sg0 > > > #------------------------------------------------------------------------= --- > # No changes should be necessary below this line > > #------------------------------------------------------------------------= --- > > #-------------------------- SCSI scanners > ---------------------------------- # These SCSI devices will be probed > automatically scsi AGFA * Scanner > scsi COLOR * Scanner > scsi Color * Scanner > scsi ACERPERI * Scanner > > #--------------------------- USB scanners > ----------------------------------- # These USB devices will be probed > automatically # (This will currently work only on Linux) > > # Benq/Acer/Vuego 310U > usb 0x04a5 0x1a20 > usb 0x04a5 0x1a26 > > # Benq/Acer/Vuego 320U > usb 0x04a5 0x2022 > > # Benq/Acer/Vuego 620U / 620UT > usb 0x04a5 0x1a2a > usb 0x04a5 0x2040 > > # Benq/Acer/Vuego 640U > usb 0x04a5 0x2060 > > # Benq/Acer/Vuego 640BU > usb 0x04a5 0x207e > > # Benq/Acer/Vuego 640BT > usb 0x04a5 0x20be > > # Benq/Acer/Vuego 1240U > usb 0x04a5 0x20c0 > > # Benq/Acer/Vuego 3300 / 4300 > usb 0x04a5 0x20b0 > > # Benq/Acer/Vuego 4300 > usb 0x04a5 0x20de > > # Benq 5000E / 5000U > usb 0x04a5 0x20f8 > > # Benq 5000 > usb 0x04a5 0x20fc > > # Benq/Acer 5300 > usb 0x04a5 0x20fe > > # Benq 5250C > usb 0x04a5 0x2137 > > # Agfa 1236U > usb 0x06bd 0x0002 > > # Agfa 1212U > usb 0x06bd 0x0001 > usb 0x06bd 0x2061 > > # Agfa Snapscan e10 > usb 0x06bd 0x2093 > > # Agfa Snapscan e20 > usb 0x06bd 0x2091 > > # Agfa Snapscan e25 > usb 0x06bd 0x2095 > > # Agfa Snapscan e26 > usb 0x06bd 0x2097 > > # Agfa Snapscan e40 > usb 0x06bd 0x208d > > # Agfa Snapscan e42 > usb 0x06bd 0x20ff > > # Agfa Snapscan e50 > usb 0x06bd 0x208f > > # Agfa Snapscan e52 > usb 0x06bd 0x20fd > > # Epson Perfection 660 > usb 0x04b8 0x0114 > > # Epson Perfection 1670 > usb 0x04b8 0x011f > > # Epson Perfection 2480 > usb 0x04b8 0x0121 > > # Epson Perfection 3490 > usb 0x04b8 0x0122 > > # Epson Stylus CX-1500 > usb 0x04b8 0x080c > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADtCJqqpS2Nm=yg_TXkrX0CTtqbaevy8XJaZqPYHr8sNKqjygQ>