Date: Thu, 12 Jul 2007 12:22:34 -0400 From: Thaddeus Quintin <thaddeus-freebsd@dm1.net> To: freebsd-questions@freebsd.org Subject: ISA Modem on FreeBSD 6.2 Message-ID: <F0F53A17-6EA9-42C9-9FFF-D8679A855075@dm1.net>
next in thread | raw e-mail | index | archive | help
I'm trying to set up HylaFax on FreeBSD, but I'm having problems with the modem setup. I tossed in an ISA modem that was laying around (not sure of the brand) and I can't figure out if it's being recognized or not. I set it to IRQ 2 and COM1. Should it be picked up by 'sio'? I disabled the onboard serial ports in the bios and commented out the 'sio' lines in the device.hints file. I'm getting some odd messages on the sio driver probe and it doesn't look like the modem is being picked up. With the current setup, i end up with /dev/ttyd0 and /dev/cuad0, but hylaFax says they're not terminal devices. I'm obviously missing something. Any help? Here's my current dmesg output. $ dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Mon Jan 22 11:59:45 UTC 2007 thaddeus@xxxxxxxx:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <DELL PE4300 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium III/Pentium III Xeon/Celeron (596.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 536862720 (511 MB) avail memory = 515944448 (492 MB) ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL PE4300> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xec00-0xecff mem 0xf9fff000-0xf9ffffff irq 16 at device 4.0 on pci2 ahc0: [GIANT-LOCKED] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xf9ffe000-0xf9ffefff irq 16 at device 6.0 on pci2 ahc1: [GIANT-LOCKED] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs aac0: <Dell PERC 2/QC> port 0xe400-0xe4ff mem 0xf9ffc000-0xf9ffdfff irq 19 at device 13.0 on pci2 aac0: [FAST] aac0: Adaptec Raid Controller 2.0.0-1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) dc0: <ADMtek AN985 10/100BaseTX> port 0xdc00-0xdcff mem 0xfe101000-0xfe1013ff irq 20 at device 8.0 on pci0 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:04:5a:89:7c:0d fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd8c0-0xd8ff mem 0xfe100000-0xfe100fff,0xfe000000-0xfe0fffff irq 21 at device 10.0 on pci0 miibus1: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:90:27:d0:e1:86 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff, 0xc8800-0xc8fff,0xc9000-0xccfff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 596922026 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle aacd0: <Volume> on aac0 aacd0: 17355MB (35544576 sectors) aacd1: <RAID 5> on aac0 aacd1: 138850MB (284365824 sectors) cd0 at ahc1 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/aacd0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F0F53A17-6EA9-42C9-9FFF-D8679A855075>