Date: Thu, 28 Nov 1996 22:32:41 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: Saekow Apitep <apitep@cs.latrobe.edu.au> Cc: questions@freebsd.org Subject: Re: Need your help, Sir. Message-ID: <Pine.BSI.3.94.961128223038.6734K-100000@gdi.uoregon.edu> In-Reply-To: <Pine.SUN.3.91.961128211339.25635A-100000@latcs1.cs.latrobe.edu.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 28 Nov 1996, Saekow Apitep wrote: > I have tried to install FreeBSD softwares(Release 2.1.6) > via ftp. However, it sounds that the software does not support my > networking card because the networking card has not been detected( > ed0, ed1 not found). I have tried to change to IRQ as well as > Port address but it still does not work. > > The card is a NIC-2006/R Ethernet adapter 32 bits. > > The specifications of the card are as follows: > > - Network Standard : IEEE802.3 10 BASE-2, and 10 BASE-T > - Network Data Transfer Rate : 10 Mbps > - Hardware : PCI Local bus-Compliant PC. > - Hardware Interupths : Mapping to BIOS IRQ Setup(Range: 0-15 INTA#) > - Base I/O Address : Automatically decided by Configuration Space > (Range:0000-FFFFH). > -Autosensing Confi. : IRQ, I/O Address, Media > > Features > -------- > Software Compatible with NE2000 Driver 1. Set an IRQ for this device in BIOS Setup. 2. put '-v' on the Boot: prompt, obtain the IRQ and port address of the card, and give that to the ed0 device. I think. 2.2, I believe, has a smart ed device driver that can probe the PCI bus as well. > The card works excellent with Microsoft windows(3.11,95,NT) ,and being used > by IRQ 11 and I/O address 1000-101F under Win95. You gave this info to the ed0 device in -c, right? Hope this helps. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.94.961128223038.6734K-100000>