Date: Sat, 11 Jan 2003 10:26:52 -0500 (EST) From: "Stephen D. Kingrea" <reytech@sover.net> To: Matthew Emmerton <matt@gsicomp.on.ca> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: newbie questions about pppoe and netgraph Message-ID: <Pine.BSI.4.21.0301111002420.5847-100000@granite.sover.net> In-Reply-To: <001001c2b982$1710a8d0$1200a8c0@gsicomp.on.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
ok here is what i get.... www# /usr/sbin/ppp Working in interactive mode Using interface: tun0 tun0: Command: default: add default HISADDR tun0: Command: default: enable DNS tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.0/2 255.255.255 0.0.0.0 tun0: Command: default: set authname ****** tun0: Command: default: set authkey ****** tun0: Command: default: set login tun0: Command: default: set dial tun0: Command: default: set timeout 0 tun0: Command: default: open tun0: Phase: bundle: Establish tun0: Phase: closed -> opening tun0: Phase: PPP started (interactive) tun0: Phase: deflink: Connected! tun0: Phase: deflink: opening -> dial tun0: Chat: deflink: Dial attempt 1 of 1 tun0: Phase: deflink: dial -> carrier ppp ON www> tun0: Phase: deflink: Disconnected! tun0: Phase: deflink: carrier -> hangup tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Jan 11 tun0: Phase: deflink hangup -> closed tun0: Phase: bundle: Dead i imagine that some of this is unnecessary, but it appears that i am not even getting to authentication before disconnecting. thank you stephen On Sat, 11 Jan 2003, Matthew Emmerton wrote: >> attempting to run pppoe on freebsd 4.7 over cable/dsl connection. >> >> manual says kernel recompilation unnecessary for this release in >> order to run pppoe. however, netgraph does not seem to be loading at boot >> time. additionally, pppoe seems unable to get past lcp when connecting. >> >> how can i tell if netgraph is active after boot? if not, can netgraph >> modules be loaded at boot by adding necessary lines into loader.conf? or >> is recompiling kernel a preferred method? > >If netgraph and pppoe support are not present in your kernel (or not loaded >from modules automatically), the ppp program will complain loudly. > >Can you post part of your ppp log file so that we can determine if the lack >of pppoe is your problem or if it's something else? > >-- >Matt Emmerton > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.21.0301111002420.5847-100000>