Date: Sun, 21 Apr 1996 16:31:27 +0100 (WET DST) From: Paulo Menezes <paulo@pegasus.isr.uc.pt> To: "Justin T. Gibbs" <gibbs@freefall.freebsd.org> Cc: current@FreeBSD.org Subject: Re: Another problem with Adaptec 2940 and S3TRIO64 Message-ID: <Pine.SUN.3.91.960421162027.3511A-100000@pioneer> In-Reply-To: <199604141634.JAA18995@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 14 Apr 1996, Justin T. Gibbs wrote:
> The aic7xxx driver in 2.1R has problems. Upgrade to 2.1-STABLE and
> see if your problems go away.
>
Well, I did... and it still shows the same problem :(
I installed the stable-kernel and started a "make world"... and after
installing the libs, it hang, with lots of messages related with the scsi
controller.
One of the messages was :"BUS DEVICE RESET message queued"
I realy need this machine working because it was bought to support our
web server...
Thanks again
Paulo
----
ener1000# dmesg
FreeBSD 2.1-STABLE #0: Fri Apr 19 01:23:17 1996
root@ener1000.dee.uc.pt:/usr/src/sys/compile/LOCAL
CPU: 99-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30539776 (29824K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 (Triton)> rev 2 on pci0:0
ahc0 <Adaptec 2940 SCSI host adapter> rev 3 int a irq 9 on pci0:6
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "MICROP 4221-09SC21020AV TN05" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 1955MB (4004219 512 byte sectors)
vga0 <VGA-compatible display device> rev 0 int a irq 255 on pci0:13
chip1 <Intel 82371 (Triton)> rev 2 on pci0:15
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
mse0: wrong signature ff
mse0 not found at 0x23c
psm0 at 0x60-0x63 irq 12 on motherboard
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0 not found at 0x300
mcd1: timeout getting status
mcd1 not found at 0x340
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0 not found at 0x360
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/bnc[*BNC*] address 00:60:8c:c3:4e:2fix0 not probed due to I/O
address conflict with ep0 at 0x300
le0 not probed due to I/O address conflict with ep0 at 0x300
lnc0 not found at 0x280
lnc1 not probed due to I/O address conflict with ep0 at 0x300
ze0 not probed due to I/O address conflict with ep0 at 0x300
zp0 not probed due to I/O address conflict with ep0 at 0x300
npx0 on motherboard
npx0: INT 16 interface
changing root device to sd0a
>
> --
> Justin T. Gibbs
> ===========================================
> FreeBSD: Turning PCs into workstations
> ===========================================
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SUN.3.91.960421162027.3511A-100000>