Date: Sun, 7 Nov 2004 19:41:59 +0300 From: Dmitry Kondratyev <null@bikeman.ru> To: freebsd-acpi@freebsd.org Subject: Re[2]: Troubles with ACPI on HP nx5000 laptop Message-ID: <66751906.20041107194159@bikeman.ru> In-Reply-To: <401094078.20041011134529@bikeman.ru> References: <128676437.20041011133831@bikeman.ru> <401094078.20041011134529@bikeman.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Dmitry, Monday, October 11, 2004, 12:45:29 PM, you wrote: DK>> After enabling ACPI on HP nx5000 my laptop (Pentium Mobile 1.7M DK>> Dothan) hangs when compiling programs. dmesg, sysctl hw.acpi and DK>> acpidump -t -d output are in attach. Disabling ACPI helps. DK> oops, attach was filtered somewhere. You can get it here: DK> http://bikeman.ru/HPnx5000.tgz The problem is in acpi thermal module. I set hw.acpi.verbose to 1 in /boot/loader.conf and noted that my laptop hangs when it changes cooling level too often. If i set hw.acpi.thermal.tz0.active to 0 for active cooling or disable thermal module via loader.conf. Btw, when I pull out power cord, my laptop also hang after trying to change power profile. In both cases it doesn't really hangs, it still react to alt-fn, enter and power button. After pressing power I get "acpi: suspend request ignored (not ready yet)". My dmesg: FreeBSD 5.3-BETA7 #0: Sat Oct 2 21:01:00 UTC 2004 root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a0d000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a0d200. Table 'FACP' at 0x1f7f0c00 Table 'APIC' at 0x1f7f0cb4 MADT: Found table at 0x1f7f0cb4 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) ACPI APIC Table: <COMPAQ CPQ0058 > Calibrating clock(s) ... i8254 clock: 1193158 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1694510867 Hz CPU: Intel(R) Pentium(R) M processor 1.70GHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> real memory = 528285696 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000001eec4fff, 506052608 bytes (123548 pages) avail memory = 507289600 (483 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31f pnpbios: Found PnP BIOS data at 0xc00f4850 pnpbios: Entry = f0000:487e Rev = 1.0 pnpbios: Event flag at f4876 pnpbios: OEM ID bc083c10 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <COMPAQ CPQ0058> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80010058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 1 dev 6 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 1 dev 6 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x10> port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 390 us acpi_ec0: info: new max delay is 510 us acpi_ec0: info: new max delay is 680 us ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3580, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x02 bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x02 bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base 98000000, size 27, enabled map[14]: type 1, range 32, base 90300000, size 19, enabled map[18]: type 4, range 32, base 00002c30, size 3, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3582, revid=0x02 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base a0000000, size 27, enabled map[14]: type 1, range 32, base 90380000, size 19, enabled found-> vendor=0x8086, dev=0x3582, revid=0x02 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[20]: type 4, range 32, base 000028c0, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[20]: type 4, range 32, base 000028e0, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=19 map[20]: type 4, range 32, base 00002c00, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 map[10]: type 1, range 32, base 90400000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=23 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00002c20, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 4, range 32, base 00002880, size 6, enabled map[18]: type 1, range 32, base 90500000, size 9, enabled map[1c]: type 1, range 32, base 90580000, size 8, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002800, size 7, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 powerspec 2 supports D0 D3 current D0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x2c30-0x2c37 mem 0x90300000-0x9037ffff,0x98000000-0x9fffffff irq 16 at device 2.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0x98000000 agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0x90300000 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x28c0-0x28df irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x28c0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x28e0-0x28ff irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x28e0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x2c00-0x2c1f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2c00 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0x90000000-0x902fffff pcib1: prefetched decode 0xfff00000-0xfffff pcib1: Subtractively decoded bridge. ACPI PCI link initial configuration: pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base 90100000, size 12, enabled pcib1: device (null) requested decoded memory range 0x90100000-0x90100fff pcib1: matched entry for 1.4.INTA pcib1: slot 4 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=1, slot=4, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=21 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 90180000, size 12, enabled pcib1: device (null) requested decoded memory range 0x90180000-0x90180fff pcib1: matched entry for 1.6.INTA pcib1: slot 6 INTA hardwired to IRQ 18 found-> vendor=0x104c, dev=0xac8e, revid=0x00 bus=1, slot=6, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 90200000, size 12, enabled pcib1: device (null) requested decoded memory range 0x90200000-0x90200fff pcib1: matched entry for 1.6.INTA pcib1: slot 6 INTA hardwired to IRQ 18 found-> vendor=0x104c, dev=0xac8e, revid=0x00 bus=1, slot=6, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 90280000, size 11, enabled pcib1: device (null) requested decoded memory range 0x90280000-0x902807ff map[14]: type 1, range 32, base 90000000, size 14, enabled pcib1: device (null) requested decoded memory range 0x90000000-0x90003fff pcib1: matched entry for 1.13.INTA pcib1: slot 13 INTA hardwired to IRQ 23 found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=1, slot=13, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=23 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 90080000, size 13, enabled pcib1: device (null) requested decoded memory range 0x90080000-0x90081fff pcib1: matched entry for 1.14.INTA pcib1: slot 14 INTA hardwired to IRQ 20 found-> vendor=0x14e4, dev=0x170c, revid=0x02 bus=1, slot=14, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <network> at device 4.0 (no driver attached) cbb0: <PCI-CardBus Bridge> mem 0x90180000-0x90180fff irq 18 at device 6.0 on pci1 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x90180000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac8e104c 0x02100007 0x06070000 0x00824008 0x10: 0x90180000 0x020000a0 0x20020201 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112 0x40: 0x08bc103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28449060 0x00a00080 0x001f0000 0x012c1202 0x90: 0x60642280 0x00000000 0x00000000 0x00000000 0xa0: 0xfe320001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <PCI-CardBus Bridge> mem 0x90200000-0x90200fff irq 18 at device 6.1 on pci1 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x90200000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac8e104c 0x02100007 0x06070000 0x00824008 0x10: 0x90200000 0x020000a0 0x20030301 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112 0x40: 0x08bc103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28449060 0x00a00080 0x001f0000 0x012c1202 0x90: 0x60642280 0x00000000 0x00000000 0x00000000 0xa0: 0xfe320001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: <Texas Instruments TSB43AB22/A> mem 0x90000000-0x90003fff,0x90280000-0x902807ff irq 23 at device 13.0 on pci1 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0x90280000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 71:8b:50:00:29:d1:11:a3 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 72:8b:50:d1:11:a3 fwe0: bpf attached fwe0: Ethernet address: 72:8b:50:d1:11:a3 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0x90080000-0x90081fff irq 20 at device 14.0 on pci1 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0x90080000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:08:02:e6:0b:1b bfe0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x2c20-0x2c2f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2c20 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0xc401 0xc411 0xc401 0xc401 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 2: ioport 0x2c00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xc401 0xc401 0xc401 0xc401 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1694510867 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_ec0: info: new max delay is 690 us acpi_ec0: info: new max delay is 710 us acpi_ec0: info: new max delay is 720 us acpi_ec0: info: new max delay is 730 us acpi_ec0: info: new max delay is 740 us acpi_ec0: info: new max delay is 810 us acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 50.0 >= setpoint 50.0 acpi_tz0: switched from NONE to _AC2: 50.0C acpi_ec0: info: new max delay is 840 us acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0 acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0 acpi_tz0: switched from _AC2 to _AC3: 50.0C ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH4 chip ata0-master: setting UDMA100 on Intel ICH4 chip ad0: <FUJITSU MHT2060AT PL/0022> ATA-6 disk at ata0-master ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel ICH4 chip acd0: <HL-DT-ST DVD+RW GCA-4040N/1.17> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/74/63 s:63 l:99655857 [1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:99655920 l:17554320 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 51023798784 end 51023831039 GEOM: Configure ad0s2, start 51023831040 length 8987811840 end 60011642879 GEOM: Configure ad0s2a, start 0 length 8450473984 end 8450473983 GEOM: Configure ad0s2b, start 8450473984 length 537337856 end 8987811839 GEOM: Configure ad0s2c, start 0 length 8987811840 end 8987811839 (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init splash: image decoder found: green_saver acpi_cmbat1: battery initialization failed, giving up My sysctls: hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 1 hw.acpi.verbose: 1 hw.acpi.reset_video: 1 hw.acpi.cpu.throttle_max: 8 hw.acpi.cpu.throttle_state: 8 hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/205 hw.acpi.cpu.cx_lowest: C3 hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00% hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.tz0.temperature: 3172 hw.acpi.thermal.tz0.active: 3 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 3732 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 3752 hw.acpi.thermal.tz0._ACx: 3532 3382 3282 3132 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1.temperature: 3192 hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: -1 hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 3762 hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz2.temperature: 3020 hw.acpi.thermal.tz2.active: -1 hw.acpi.thermal.tz2.thermal_flags: 0 hw.acpi.thermal.tz2._PSV: 3332 hw.acpi.thermal.tz2._HOT: -1 hw.acpi.thermal.tz2._CRT: 3752 hw.acpi.thermal.tz2._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 2 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 ASL is in this file http://bikeman.ru/HPnx5000.tgz -- Best regards, Dmitry mailto:null@bikeman.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?66751906.20041107194159>