Date: Tue, 10 Jul 2007 07:21:50 -0500 From: Eric Anderson <anderson@freebsd.org> To: Victor Snezhko <snezhko@indorsoft.ru> Cc: freebsd-current@freebsd.org Subject: Re: Debugging time Message-ID: <469379DE.2030605@freebsd.org> In-Reply-To: <usl7w648w.fsf@indorsoft.ru> References: <f6u94s$v6o$1@sea.gmane.org> <usl7wvnc9.fsf@indorsoft.ru> <46934301.5080302@fer.hr> <usl7w648w.fsf@indorsoft.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Victor Snezhko wrote: > Ivan Voras <ivoras@fer.hr> writes: > >>> For about half a year I have another weirdness with time on my >>> -current box without vmware, maybe it's somehow has common origins >>> with your behaviour. When I boot FreeBSD, ntpdate (which is set up to >>> run via rc.conf) often reports huge time offsets: >>> 10 Jul 12:04:34 ntpdate[51761]: step time server ntp.server.name offset 234456.074166 sec >>> >>> I have so far only noticed that the value of the the offset is roughly >>> equal to the amount of time when FreeBSD isn't running (this is a >>> dual-boot box with windows). The box is pretty old, 600-MHz Celeron >> Is the above number correct (i.e. ~~ 65 hours)? > > Yes, sometimes my FreeBSD is not running for several days - in this > case ntpdate prints such numbers. It looks like kernel stores date and > time values somewhere and then re-reads them. I still don't rule out > some stupidity on my part - the behaviour I'm observing is very > illogic. Maybe I should try installing current from a fresh snapshot > when it's released. > >> I noticed there can be a consistent "shift" of duration equal to >> your timezone when VMWare sets the RTC to the host's local time and >> FreeBSD thinks it's UTC. But if the difference is not constant, it's >> not it. > > When I just reboot FreeBSD, offset doesn't exceed one or two seconds > (notably, bios takes longer to boot, about 5-10 seconds). When BSD is > inactive for several hours, number is much bigger. > > I neglected to debug this deeply before - I assumed I have overlooked > something simple, but now that you have reported another issue in the > similar area, I'll try to collect full information. > When you say 'inactive', do you mean that you have suspended the machine in vmware, or it is 'powered off'? Eric
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?469379DE.2030605>