Date: Sat, 15 Jul 2006 08:54:17 -0400 From: "Alexandre \"Sunny\" Kovalenko" <Alex.Kovalenko@verizon.net> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: USB bluetooth dongles Message-ID: <1152968057.922.5.camel@RabbitsDen> In-Reply-To: <200607151012.52836.hselasky@c2i.net> References: <200607132025.09316.hselasky@c2i.net> <200607141645.56279.hselasky@c2i.net> <1152913957.758.5.camel@RabbitsDen> <200607151012.52836.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 2006-07-15 at 10:12 +0200, Hans Petter Selasky wrote: > On Friday 14 July 2006 23:52, Alexandre "Sunny" Kovalenko wrote: > > On Fri, 2006-07-14 at 16:45 +0200, Hans Petter Selasky wrote: > > > On Thursday 13 July 2006 22:08, Hans Petter Selasky wrote: > > > > On Thursday 13 July 2006 21:50, Anish Mistry wrote: > > > > > On Thursday 13 July 2006 15:41, Hans Petter Selasky wrote: > > > > > > On Thursday 13 July 2006 20:53, Anish Mistry wrote: > > > > > > > On Thursday 13 July 2006 14:25, Hans Petter Selasky wrote: > > > > > > > > Hi, > > > > > > > > > > > > > > > > Is there anyone on this list using USB Bluetooth dongles, that > > > > > > > > can test my new USB system and the USB Bluetooth driver? > > > > <snip> > > > > > cd i4b/trunk/i4b/FreeBSD.usb > > > > > > make S=../src package > > > > > > make install # you can specify a destination directory by using S=XXX > > > > > > Then copy the following files to > > > "/usr/src/sys/netgraph/bluetooth/drivers/ubt/" (for example) > > > > > > i4b/trunk/i4b/src/sys/netgraph/bluetooth/drivers/ubt/TODO > > > i4b/trunk/i4b/src/sys/netgraph/bluetooth/drivers/ubt/ng_ubt.c > > > i4b/trunk/i4b/src/sys/netgraph/bluetooth/drivers/ubt/ng_ubt_var.h > > > > > > Then build a kernel with the following options: > > > > > > device netgraph_bluetooth_ubt > > > device netgraph_bluetooth > > > device netgraph > > > > > > Then I hope it works, after that you have installed the new kernel. Else > > > send me dmesg from the panics you get, like usual :-) > > > > > > Thanks, > > > --HPS > > > _______________________________________________ > > > freebsd-usb@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > > > To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org" > > > > Error below is what I get with -CURRENT of July 9th. I am building all > > USB stuff as modules though, would that be a problem? > > No. It seems like I have forgot a small patch. Could you try the following > patch (just apply it manually): > > --- usb_port.h Fri Mar 17 17:56:07 2006 > +++ /sys/dev/usb/usb_port.h Sat Jul 8 11:14:00 2006 > @@ -43,6 +43,7 @@ > # ifdef __FreeBSD__ > > # include <sys/conf.h> > +# include <machine/bus.h> /* bus_space_xxx() */ > # include <machine/resource.h> /* SYS_XXX */ > # include <sys/bus.h> /* device_xxx() */ > # ifdef INCLUDE_PCIXXX_H > > Then try to build again. > > --HPS At least on my system (-CURRENT as of July 9) sys/dev/usb/usb_port.h merely includes sys/dev/usb2/usb_port.h, so I have patched that instead. Kernel build was successfull, but attempt to load ng_ubt module results in link_elf: symbol usbd_driver_load undefined This is the system built with configuration AVERATEC from my previous posts. I will try to build kernel with USB inside and see if that fares any better. Might not be until later today or tomorrow though... -- Alexandre Kovalenko (Олександр Коваленко)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1152968057.922.5.camel>