Date: Tue, 24 Mar 1998 06:06:25 -0800 (PST) From: Ulf Zimmermann <ulf@Alameda.net> To: questions@FreeBSD.ORG Subject: I give up, how do I use ppp with -auto, chap and dynamic addresses ? Message-ID: <199803241406.GAA24611@Gatekeeper.Alameda.net>
next in thread | raw e-mail | index | archive | help
Trying to dial into AT&T Worldnet, chat itself it login in, then currently either the chap or the IP assignment fails. /etc/ppp/ppp.conf looks like this: default: set device /dev/cuaa1 set speed 115200 set log Phase Chat Connect Carrier hdlc LCP IPCP CCP tun deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT" worldnet: set phone 18085368495 accept chap deny pap set authname <username> set authkey <password> set login "TIMEOUT 5 Please Sign-on:-\\r-ign-on:" set timeout 120 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 delete ALL add 0 0 HISADDR Here is a syslog cut+paste: Mar 24 07:07:53 system3 ppp[277]: tun0: Phase: Using interface: tun0 Mar 24 07:07:53 system3 ppp[277]: tun0: Phase: PPP Started. Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: sending: ATE1Q0^M Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting OK-AT-OK Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Wait for (5): OK --> OK Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: ATE1Q0^M^M Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: OK Mar 24 07:07:55 system3 ppp[277]: tun0: Phase: Phone: 18085368495 Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: sending: ATDT18085368495^M Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting CONNECT Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Wait for (40): CONNECT --> CONNECT Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: ^M Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: ATDT18085368495^M^M Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: CONNECT Mar 24 07:08:21 system3 ppp[277]: tun0: Chat: Expecting Please Mar 24 07:08:21 system3 ppp[277]: tun0: Chat: Wait for (5): Please --> Please Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: 115200^M Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: ^M Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: STATION ID - hnlhi02ms09am002,s nfca05ev^M Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: ^M Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: Welcome ^M Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: Please Mar 24 07:08:23 system3 ppp[277]: tun0: Chat: sending: Sign-on:-^M-ign-on:^M Mar 24 07:08:23 system3 ppp[277]: tun0: Phase: *Connected! Mar 24 07:08:23 system3 ppp[277]: tun0: IPCP: Using trigger address 255.255.255. 0 Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: State change Initial --> Closed Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: LcpSendConfigReq Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: ACFCOMP Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: PROTOCOMP Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: MRU [4] 1500 Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 Mar 24 07:08:23 system3 ppp[277]: tun0: HDLC: HdlcOutput Mar 24 07:08:23 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: State change Closed --> Req-Sent Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: LcpSendConfigReq Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: ACFCOMP Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: PROTOCOMP Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: MRU [4] 1500 Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 Mar 24 07:08:26 system3 ppp[277]: tun0: HDLC: HdlcOutput Mar 24 07:08:26 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: LcpSendConfigReq Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: ACFCOMP Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: PROTOCOMP Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: MRU [4] 1500 Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 Mar 24 07:08:29 system3 ppp[277]: tun0: HDLC: HdlcOutput Mar 24 07:08:29 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: LcpSendConfigReq Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: ACFCOMP Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: PROTOCOMP Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: MRU [4] 1500 Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 Mar 24 07:08:32 system3 ppp[277]: tun0: HDLC: HdlcOutput Mar 24 07:08:32 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: LcpSendConfigReq Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: ACFCOMP Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: PROTOCOMP Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: MRU [4] 1500 Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 Mar 24 07:08:35 system3 ppp[277]: tun0: HDLC: HdlcOutput Mar 24 07:08:35 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 Mar 24 07:08:38 system3 ppp[277]: tun0: LCP: State change Req-Sent --> Stopped Mar 24 07:08:38 system3 ppp[277]: tun0: LCP: LcpLayerFinish Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Dead Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Terminate Mar 24 07:08:39 system3 ppp[277]: tun0: IPCP: Using trigger address 255.255.255. 0 Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: Disconnected! Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: Connect time: 16 secs Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Dead Mar 24 07:08:44 system3 ppp[277]: tun0: Phase: PPP Terminated (normal). Any suggestions ? Tips ? A tired, Ulf. (damn, I am doing too much with Ciscos) --------------------------------------------------------------------- Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-769-2936 Alameda Networks, Inc. | http://www.Alameda.net | Fax#: 510-521-5073 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199803241406.GAA24611>