Date: Sun, 6 Jun 1999 22:05:35 +0200 From: "Frank J. Beckmann" <frank@vogon.agala.harz.de> To: freebsd-isdn@freebsd.org Subject: Re: ELSA MicroLink ISDN/PCF Message-ID: <19990606220535.A52112@vogon.agala.harz.de>
next in thread | raw e-mail | index | archive | help
In article <MSGID_242=3A7600=2F1_3758dc75@Fido.DE> you wrote: > FJB> what option and device line do I need to get an ELSA MicroLink > FJB> ISDN/PCF working with i4b in 3.2-STAVBLE? > > FJB> options "ELSA_ISDNMC" > >That won't work. If anything would work, then this: It was just a guess. i4b in 3.2-STAVBLE is still 0.71 which doesn't support my card. >options "ELSA_PCC16" >device isic0 at isa? port 0x360 net irq 5 flags 19 vector isicintr I got i4b 0.81 which supports "ELSA_PCC16" and my card works now. :-) >The PCF is the same board as the PCC with added Fax functionality (which i4b >cannot use anyway). Although Gary suggested it wouldn't work, I would give it a >try. Perhaps you have to look in the code and copy code from the PCC section to >the PCF section, if that distinction should be made anywhere. Are the PCF and PCC really different in hardware or only in software, and what are the 2 LEDs for? I get a lot messages: i4b-L1-isicintr: WARNING: unit 0, No IRQ from HSCX/ISAC! but systat shows about 260 ips on irq 5 when I download something from the net, so I guess only some interrupts get lost. My system is based on an Intel DK440LX with 2 PII 333. I tryed options "I4B_SMP_WORKAROUND" but it doesn't help. Frank To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990606220535.A52112>