Date: Sun, 19 Aug 2001 21:45:14 -0500 From: Stephen <sdk@shell.yuck.net> To: freebsd-scsi@freebsd.org Subject: ahc error Message-ID: <20010819214514.A17773@visi.com>
next in thread | raw e-mail | index | archive | help
I'm running FreeBSD 4.3 and 4.4-RC1, and have a Adaptec 2930U2 scsi card. After upgrading my mainboard to an Epox 8k7a I've started getting the following messages (normally at boot time): Aug 19 21:17:03 ganymede /kernel: ahc0: PCI error Interrupt at seqaddr = 0x8 Aug 19 21:17:03 ganymede /kernel: ahc0: Data Parity Error Detected during address or write data phase Aug 19 21:17:03 ganymede /kernel: ahc0: PCI error Interrupt at seqaddr = 0x9 Aug 19 21:17:03 ganymede /kernel: ahc0: Data Parity Error Detected during address or write data phase Aug 19 21:17:04 ganymede /kernel: ahc0: PCI error Interrupt at seqaddr = 0x8 Aug 19 21:17:04 ganymede /kernel: ahc0: Data Parity Error Detected during address or write data phase Aug 19 21:23:20 ganymede /kernel: ahc0: PCI error Interrupt at seqaddr = 0x9 Aug 19 21:23:20 ganymede /kernel: ahc0: Data Parity Error Detected during address or write data phase Here's the Adaptec line: ahc0: <Adaptec 2930 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem 0xdd002000-0xdd002fff irq 11 at device 11.0 on pci0 The only thing on the scsi bus is a Plextor CD-R. I get the messages at boot time, and periodically while using the Plextor. Any ideas? The Plextor seems to work fine but I am worried about the messages. Please CC and reply to my address above; I'm not a member of the list. Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010819214514.A17773>