Date: Fri, 12 Jul 2002 11:11:43 -0700 (MST) From: Jason Barnes <jbarnes@c3po.lpl.arizona.edu> To: questions@freebsd.org Subject: XFree86 4.2 screen resolutions Message-ID: <20020712110818.I49110-100000@c3po.lpl.arizona.edu>
next in thread | raw e-mail | index | archive | help
Hi! I am running FreeBSD 4.6-RELEASE and am just biting the
bullet to upgrade to XFree86 4.2 for purposes of KDE3. Everything is
working -- except that I can't seem to get the screen to go into any mode
but 640x480 (any color depth). I want to get to 1024x768 (24bit), and I
know this should be possible because it was running that way under XFree86
3.3. I would greatly apreciate any insight you might have into this
matter. Here is my XF86Config:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "xie"
Load "pex5"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "MouseSystems"
Option "Device" "/dev/sysmouse"
EndSection
Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "JEN"
ModelName "1055"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "slow_edodram" # [<bool>]
#Option "slow_dram" # [<bool>]
#Option "fast_dram" # [<bool>]
#Option "fpm_vram" # [<bool>]
#Option "pci_burst" # [<bool>]
#Option "fifo_conservative" # [<bool>]
#Option "fifo_moderate" # [<bool>]
#Option "fifo_aggressive" # [<bool>]
#Option "pci_retry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "early_ras_precharge" # [<bool>]
#Option "late_ras_precharge" # [<bool>]
#Option "lcd_center" # [<bool>]
#Option "set_lcdclk" # <i>
#Option "set_mclk" # <freq>
#Option "set_refclk" # <freq>
#Option "show_cache" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseFB" # [<bool>]
#Option "mxcr3afix" # [<bool>]
#Option "XVideo" # [<bool>]
Identifier "Card0"
Driver "s3virge"
VendorName "S3"
BoardName "ViRGE/GX2"
BusID "PCI:0:8:0"
VideoRAM 4096
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# SubSection "Display"
# Depth 1
# EndSubSection
# SubSection "Display"
# Depth 4
# EndSubSection
# SubSection "Display"
# Depth 8
# EndSubSection
# SubSection "Display"
# Depth 15
# EndSubSection
# SubSection "Display"
# Depth 16
# EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
- Jason Barnes
**** Jason Wayne Barnes **** -- "Active on the internet." ****
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020712110818.I49110-100000>