Date: Fri, 25 Jul 2003 15:17:21 -0600 From: "Kenneth D. Merry" <ken@kdm.org> To: bruno schwander <bruno@tinkerbox.org> Cc: freebsd-scsi@freebsd.org Subject: Re: atapicam and cdrecord Message-ID: <20030725211720.GA66248@panzer.kdm.org> In-Reply-To: <Pine.BSF.4.21.0307251338440.297-100000@duron.bschwand.net> References: <Pine.BSF.4.21.0307251318300.297-100000@duron.bschwand.net> <Pine.BSF.4.21.0307251338440.297-100000@duron.bschwand.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jul 25, 2003 at 13:40:29 -0700, bruno schwander wrote: > > I am trying to get cdrecord to work with my IDE cd writer. > > I added the scsi support as well as atapicam in my kernel (FreeBSD > 4.8-STABLE #0: Tue Jul 22 12:09:08 PDT 2003) > > relevant dmesg > --------------------------- > acd0: DVD-ROM <TOSHIBA DVD-ROM SD-M1002> at ata0-master PIO3 > acd1: CD-RW <LITE-ON LTR-40125S> at ata3-master PIO4 > Mounting root from ufs:/dev/ad4s1a > cd0 at ata0 bus 0 target 0 lun 0 > cd0: <TOSHIBA DVD-ROM SD-M1002 0577> Removable CD-ROM SCSI-0 device > cd0: 11.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present > cd1 at ata3 bus 0 target 0 lun 0 > cd1: <LITE-ON LTR-40125S ZS0J> Removable CD-ROM SCSI-0 device > cd1: 16.000MB/s transfers > cd1: cd present [1 x 2048 byte records] > --------------------------- > > so it looks good > > camcontrol devlist gives > ------------------------------- > <TOSHIBA DVD-ROM SD-M1002 0577> at scbus0 target 0 lun 0 (pass0,cd0) > <LITE-ON LTR-40125S ZS0J> at scbus3 target 0 lun 0 (pass1,cd1) > ------------------------------- > > so I gather that I should use cdrecord --device 3,0,0 etc. (as I found > in some other maillist) > > however, cdrecord complains with > ------------------------------ > ERROR: Cannot open SCSI device '3,0,0': > ERROR: Please use option '--device bus,id,lun', e.g. --device 0,6,0 > ERROR: Cannot setup device 3,0,0. > ------------------------------ > > and cdrecord scanbus does not list any available drives. > > What gives ? anything missing ? It seems everything is there... First, make sure camcontrol can talk directly to the drive: camcontrol tur cd1 -v If you can't talk to the drive, make sure you have device nodes for at least pass0 and pass1: cd /dev sh ./MAKEDEV pass4 (That will create pass0-pass3) Ken -- Kenneth Merry ken@kdm.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030725211720.GA66248>