Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 1 Jun 2004 19:53:24 -0400 (EDT)
From:      Tuc at Beach House <tuc@tucs-beachin-obx-house.com>
To:        ken@kdm.org (Kenneth D. Merry)
Cc:        Tuc at Beach House <tuc@ttsg.com>
Subject:   Re: 1TB issue
Message-ID:  <200406012353.i51NrOZj069823@himinbjorg.tucs-beachin-obx-house.com>
In-Reply-To: <20040601234010.GA72828@panzer.kdm.org> from "Kenneth D. Merry" at Jun 01, 2004 05:40:10 PM

next in thread | previous in thread | raw e-mail | index | archive | help
> >         What can I do to get this configured properly? It seems that if I
> > bring it down to RAID-1+0, it configures up fine (Not sure what the
> > geometry shows as, sorry).
> 
> See another recent message on this list from Brooks Davis.  It sounds like
> sysinstall has issues with large arrays in -current, but fdisk works okay.
> 
> Try doing your installation on a smaller fdisk partition within sysinstall,
> and then once you're installed, use the command line fdisk to create
> another slice and use up the rest of the array.
> 
	This is a 2nd drive, so its ok. I already have 5.2.1-RELEASE-p4 
installed on /dev/da1.

	If I just do :

vjofn2# fdisk da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=135154 heads=255 sectors/track=63 (16065 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=135154 heads=255 sectors/track=63 (16065 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    start 63, size 2171248947 (1060180 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>


	So what config to command line fdisk should I use?

p	1	0	0	0
p	1	165	1	2171249010


		Thanks, Tuc



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406012353.i51NrOZj069823>