Date: Wed, 13 Jul 2005 11:55:16 -0400 From: John Baldwin <jhb@FreeBSD.org> To: freebsd-acpi@freebsd.org Cc: KAYVEN RIESE <kayve@sfsu.edu> Subject: Re: can't see nuthin' Message-ID: <200507131155.16904.jhb@FreeBSD.org> In-Reply-To: <Pine.GSO.4.44.0507121400530.20729-100000@libra.sfsu.edu> References: <Pine.GSO.4.44.0507112007310.12063-100000@libra.sfsu.edu> <200507121610.44409.jhb@FreeBSD.org> <Pine.GSO.4.44.0507121400530.20729-100000@libra.sfsu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 12 July 2005 05:14 pm, KAYVEN RIESE wrote: > On Tue, 12 Jul 2005, John Baldwin wrote: > > On Tuesday 12 July 2005 04:04 pm, KAYVEN RIESE wrote: > > > On Tue, 12 Jul 2005, John Baldwin wrote: > > > > On Monday 11 July 2005 11:08 pm, KAYVEN RIESE wrote: > > > > > i can't see any of my devices with freeBSD 6.0 umm.. > > > > > > > > > > tell me what to tell you because i have no clue. > > > > > > > > First off, what actual problem are you having? What do you mean by > > > > "can't see any of my devices". The dmesg you posted shows the kernel > > > > detecting lots of devices. > > > > > > okay sorry.. i can see my hard drive but i am not sure i can see > > > my modem or my wireless modem and right now the biggie is the > > > SD card reader.. i thought maybe the complete listing of dmesg > > > that i sent but some 'bot i think told me the email was too big.. > > > would tell you there are lots of problems > > > > Ok, first off, can you provide the output of 'pciconf -l'? > > BUILD: 165 lines, 4323 characters. > Path: /usr/ports/distfiles > (root@www) 111> pciconf -l > none0@pci0:31:5: class=0x040100 card=0x17131043 chip=0x24c58086 > rev=0x03 > hdr=0x00 This is your sound card and should work fine if you just 'kldload snd_ich' I believe. > none1@pci0:31:6: class=0x070300 card=0x18261043 chip=0x24c68086 > rev=0x03 > hdr=0x00 This is your modem and it is some sort of winmodem. I'm not sure if there are any ports that support this modem for FreeBSD. > none3@pci2:2:0: class=0x028000 card=0x10008086 chip=0x42238086 rev=0x05 > hdr=0x00 Not sure what this is. The class code is for an "ethernet controller, other", and the closest ID in pci_vendors is: 4220 PRO/Wireless 2200BG Network Connection So this is probably your wireless card. Not sure about your SD reader as I don't see it in your PCI device list. > Path: /usr/ports/distfiles > (root@www) 112> > > >It looks like your > > modem is a PCI device. If it is a winmodem, then it might not be > > supported (some winmodems do work with some drivers available in ports). > > Also, are you trying to use a PCMCIA card in your first slot? > > the day after that maybe i went to San Francisco State University > to try to do my assignment for a graduate course called > distributed systems. i dropped the class last semester and > the prof agreed to help me werk on the assignment this summer > so i could take the course in fall.. we have to install a > middleware called MICO (mini corba but now "mico is corba" > because it has grown).. that didn't werk, and he told me i > needed a stable version of freeBSD.. (i have 6.0 on partition > ad0s1).. You should be able to build mico from ports (ports/devel/mico) just fine on either 5.x or 6.0. > then i found out that in the side of my puter, there is like > a PCMCIA flash memory card reader that operates on a > high bandwith PCI bus (i am reading the small hardware > manual that came with the puter ) and accepts several > different types of small mass storage devices.. i have > took the little plastic plug out and stuck my 256MB > foto card in and left it there since.. i don't know > how to mount the thing. Well, not sure what to tell you there as I can't make enough out of this to know exactly where the SD card reader should be. -- John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200507131155.16904.jhb>