Date: Sun, 24 Jul 2005 12:19:12 +0200 From: Jeremie Le Hen <jeremie@le-hen.org> To: freebsd-current@FreeBSD.org Subject: burncd: FAILURE - WRITE_BIG ILLEGAL REQUEST Message-ID: <20050724101911.GJ74719@obiwan.tataz.chchile.org>
next in thread | raw e-mail | index | archive | help
--KsGdsel6WgEHnImy Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi list, sorry for the subject in caps. I gave a try to the burncd(8) to write an ISO image, but it failed. I checked the archives, but found nothing relevant. My dmesg is attached, I can give the verbose one upon request. The line enclosed in "**" is a kernel message. %%% jarjarbinks:OpenBSD# burncd -vtds max raw OpenBSD37.iso adding type 0x00 file OpenBSD37.iso size 348578 KB 151762 blocks (0 padded) next writeable LBA 0 CUE sheet: 01 00 00 01 00 00 02 00 01 01 01 00 00 00 04 00 01 aa 01 01 00 21 2f 25 addr = 150 size = 356943872 blocks = 151762 writing from file OpenBSD37.iso size 348578 KB ** acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0 ** Input/output error %%% Any idea, clue, explanation ? Thanks. Regards, -- Jeremie Le Hen < jeremie at le-hen dot org >< ttz at chchile dot org > --KsGdsel6WgEHnImy Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.jarjarbinks" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #157: Sat Jul 23 04:11:36 CEST 2005 root@jarjarbinks.tataz.chchile.org:/usr/src/sys/i386/compile/JARJARBINKS WARNING: DIAGNOSTIC option enabled, expect reduced performance. WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. ACPI APIC Table: <INTEL ALVISO > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 1072168960 (1022 MB) avail memory = 1040314368 (992 MB) ACPI-0377: *** Info: Table [SSDT] replaced by host OS ACPI-0377: *** Info: Table [SSDT] replaced by host OS ACPI-0377: *** Info: Table [SSDT] replaced by host OS ACPI: overriding DSDT/SSDT with custom table ACPI-0377: *** Info: Table [DSDT] replaced by host OS ioapic1: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 15.15> irqs 24-23 on motherboard acpi0: <PTLTD RSDT> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0 unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci9: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci10: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib4 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: LegSup = 0x003b usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: LegSup = 0x0010 usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: LegSup = 0x0010 usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: LegSup = 0x0010 usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib5 cbb0: <PCI-CardBus Bridge> mem 0xc8216000-0xc8216fff irq 18 at device 1.0 on pci6 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci6: <serial bus, FireWire> at device 1.2 (no driver attached) pci6: <mass storage> at device 1.3 (no driver attached) pci6: <network> at device 3.0 (no driver attached) bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xc8200000-0xc820ffff irq 16 at device 8.0 on pci6 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:c0:9f:94:39:8f bge0: [GIANT-LOCKED] pci0: <multimedia, audio> at device 30.2 (no driver attached) pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcf7ff,0xe0000-0xe17ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1729008890 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging unlimited ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: 76319MB <TOSHIBA MK8025GAS KA023A> at ata0-master UDMA33 acd0: DVDR <MATSHITAUJ-845D/D100> at ata0-slave UDMA33 Expensive timeout(9) function: 0xc05877b0(0xc22fa190) 0.003640406 s cpu0: Cx states changed Expensive timeout(9) function: 0xc05877b0(0xc22fa190) 0.022177958 s Trying to mount root from ufs:/dev/ad0s1a WARNING: /mnt/ufs.1 was not properly dismounted WARNING: /mnt/ufs.4 was not properly dismounted WARNING: /mnt/ufs.3 was not properly dismounted WARNING: /mnt/ufs.2 was not properly dismounted acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0 acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0 acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 error=0 --KsGdsel6WgEHnImy--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050724101911.GJ74719>