Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Aug 2006 10:58:50 +0200
From:      Gerrit =?ISO-8859-1?Q?K=FChn?= <gerrit@pmp.uni-hannover.de>
To:        pyunyh@gmail.com
Cc:        freebsd-stable@freebsd.org
Subject:   Re: re interface broken
Message-ID:  <20060803105850.5254d278.gerrit@pmp.uni-hannover.de>
In-Reply-To: <20060803002615.GA49195@cdnetworks.co.kr>
References:  <20060802161634.eff2b6d1.gerrit@pmp.uni-hannover.de> <20060803002615.GA49195@cdnetworks.co.kr>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 3 Aug 2006 09:26:15 +0900 Pyun YongHyeon <pyunyh@gmail.com> wrote
about Re: re interface broken:

>  > today, the interface still doesn't work. Is there work going on to
>  > fix this, can I provide further information to track this problem

> I think you should show 'dmesg' and 'pciconf -lv' output first.

Here they are:


agp0@pci0:0:0:	class=0x060000 card=0x08600e11 chip=0x33408086
rev=0x03 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82855PM Host-Hub Interface Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:	class=0x060400 card=0x00000000 chip=0x33418086
rev=0x03 hdr=0x01 vendor   = 'Intel Corporation'
    device   = '82855PM AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:	class=0x0c0300 card=0x08600e11 chip=0x24c28086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:	class=0x0c0300 card=0x08600e11 chip=0x24c48086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:	class=0x0c0300 card=0x08600e11 chip=0x24c78086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:	class=0x0c0320 card=0x08600e11 chip=0x24cd8086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI
Controller' class    = serial bus
    subclass = USB
pcib2@pci0:30:0:	class=0x060400 card=0x00000000 chip=0x24488086
rev=0x81 hdr=0x01 vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge' class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:	class=0x060100 card=0x00000000 chip=0x24cc8086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:	class=0x01018a card=0x08600e11 chip=0x24ca8086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
none0@pci0:31:3:	class=0x0c0500 card=0x08600e11 chip=0x24c38086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
    class    = serial bus
    subclass = SMBus
pcm0@pci0:31:5:	class=0x040100 card=0x08600e11 chip=0x24c58086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio
Controller' class    = multimedia
    subclass = audio
none1@pci0:31:6:	class=0x070300 card=0x08600e11 chip=0x24c68086
rev=0x01 hdr=0x00 vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem
Controller' class    = simple comms
    subclass = generic modem
none2@pci1:0:0:	class=0x030000 card=0x08600e11 chip=0x4c661002
rev=0x01 hdr=0x00 vendor   = 'ATI Technologies Inc'
    device   = 'Mobility Radeon 9000'
    class    = display
    subclass = VGA
fwohci0@pci2:0:0:	class=0x0c0010 card=0x30441106 chip=0x30441106
rev=0x80 hdr=0x00 vendor   = 'VIA Technologies Inc'
    device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
    class    = serial bus
    subclass = FireWire
re0@pci2:1:0:	class=0x020000 card=0x08600e11 chip=0x813910ec
rev=0x20 hdr=0x00 vendor   = 'Realtek Semiconductor'
    device   = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
    class    = network
    subclass = ethernet
none3@pci2:2:0:	class=0x028000 card=0x12f6103c chip=0x42208086
rev=0x05 hdr=0x00 vendor   = 'Intel Corporation'
    device   = 'PRO/Wireless 2200BG Network Connection'
    class    = network
cbb0@pci2:4:0:	class=0x060700 card=0x08600e11 chip=0x14101524
rev=0x01 hdr=0x02 vendor   = 'ENE Technology Inc'
    device   = 'CB-1420 CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus


Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #4: Wed Aug  2 12:30:17 CEST 2006
    root@nova.terra.ger:/usr/obj/usr/src/sys/NOVA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09a2000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc09a216c.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc09a221c.
Preloaded splash_image_data "/boot/obi_chuck.bmp" at 0xc09a22c8.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc09a2318.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc09a23c4.
Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc09a2470.
Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc09a251c.
Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc09a25c8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09a2678.
Calibrating clock(s) ... i8254 clock: 1193152 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 598061766 Hz
CPU: Intel(R) Pentium(R) M processor 1.60GHz (598.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 1341980672 (1279 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000004e90efff, 1305387008 bytes (318698 pages)
avail memory = 1305202688 (1244 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31f
pnpbios: Found PnP BIOS data at 0xc00f45c0
pnpbios: Entry = f0000:45ee  Rev = 1.0
pnpbios: Event flag at f45e6
pnpbios: OEM ID 6008110e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 
00 01 00 04 00 01 19 01 00 01 2f 01 00 01 34 01 
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 
VESA: 60 mode(s) found
VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc08a27c2 (1000022)
VESA: ATI MOBILITY RADEON 9200
VESA: ATI Technologies Inc. M9   01.00
mem: <memory>
Pentium Pro MTRR support enabled
nfslock: pseudo-device
splash: image@0xc08a36c8, size:308278
bmp_start(): splash_mode:257
splash: image decoder found: splash_bmp
npx0: INT 16 interface
acpi0: <HP CPQ0860> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there
(id=33408086) pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 1 dev 0 func 0
acpi0: [MPSAFE]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 2 dev 4 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 6
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 10
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 10
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 10
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 10
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 10
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 10
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 10
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 10
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 10
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 10
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 10
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 10
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.29.INTA at func 0: 10
ACPI: Found matching pin for 0.29.INTB at func 1: 5
ACPI: Found matching pin for 0.29.INTC at func 2: 5
ACPI: Found matching pin for 0.29.INTD at func 7: 5
ACPI: Found matching pin for 0.31.INTA at func 1: 5
ACPI: Found matching pin for 0.31.INTB at func 3: 10
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x3340, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base b0000000, size 28, enabled
found->	vendor=0x8086, dev=0x3341, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type 4, range 32, base 000048c0, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.C046.C0C2:0)
pcib0: slot 29 INTA routed to irq 10 via \\_SB_.C046.C0C2
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	map[20]: type 4, range 32, base 000048e0, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.C046.C0C5:0)
pcib0: slot 29 INTB routed to irq 5 via \\_SB_.C046.C0C5
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[20]: type 4, range 32, base 00004c00, size  5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.C046.C0C4:0)
pcib0: slot 29 INTC routed to irq 5 via \\_SB_.C046.C0C4
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=5
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base a0000000, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.C046.C0C9:0)
pcib0: slot 29 INTD routed to irq 5 via \\_SB_.C046.C0C9
found->	vendor=0x8086, dev=0x2448, revid=0x81
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[20]: type 4, range 32, base 00004c40, size  4, enabled
	map[24]: type 1, range 32, base 00000000, size 10, memory disabled
pcib0: matched entry for 0.31.INTA (src \\_SB_.C046.C0C4:0)
pcib0: slot 31 INTA routed to irq 5 via \\_SB_.C046.C0C4
found->	vendor=0x8086, dev=0x24c3, revid=0x01
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type 4, range 32, base 00004c20, size  5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.C046.C0C3:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.C046.C0C3
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00004000, size  8, enabled
	map[14]: type 4, range 32, base 00004880, size  6, enabled
	map[18]: type 1, range 32, base a0200000, size  9, enabled
	map[1c]: type 1, range 32, base a0300000, size  8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.C046.C0C3:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.C046.C0C3
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00004400, size  8, enabled
	map[14]: type 4, range 32, base 00004800, size  7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.C046.C0C3:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.C046.C0C3
agp0: <Intel 82855 host to AGP bridge> mem 0xb0000000-0xbfffffff at device
0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at
0xb0000000 agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0x90400000-0x904fffff
pcib1:   prefetched decode 0x98000000-0x9fffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 10
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1002, dev=0x4c66, revid=0x01
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0083, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base 98000000, size 27, enabled
pcib1: (null) requested memory range 0x98000000-0x9fffffff: good
	map[14]: type 4, range 32, base 00003000, size  8, enabled
pcib1: (null) requested I/O range 0x3000-0x30ff: in range
	map[18]: type 1, range 32, base 90400000, size 16, enabled
pcib1: (null) requested memory range 0x90400000-0x9040ffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.C046.C0C2:0)
pcib1: slot 0 INTA routed to irq 10 via \\_SB_.C046.C0C2
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x48c0-0x48df irq
10 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4
at 0x48c0 uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x48e0-0x48ff irq
5 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at
0x48e0 uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x4c00-0x4c1f irq
5 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at
0x4c00 uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem
0xa0000000-0xa00003ff irq 5 at device 29.7 on pci0 ehci0: Reserved 0x400
bytes for rid 0x10 type 3 at 0xa0000000 ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   3
pcib2:   I/O decode        0x2000-0x2fff
pcib2:   memory decode     0x90000000-0x903fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2:   Subtractively decoded bridge.
ACPI: Found matching pin for 2.0.INTA at func 0: 10
ACPI: Found matching pin for 2.1.INTA at func 0: 10
ACPI: Found matching pin for 2.2.INTA at func 0: 11
pci_link3: BIOS IRQ 11 for 2.2.INTA is invalid
ACPI: Found matching pin for 2.4.INTA at func 0: 5
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found->	vendor=0x1106, dev=0x3044, revid=0x80
	bus=2, slot=0, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type 1, range 32, base 90200000, size 11, enabled
pcib2: (null) requested memory range 0x90200000-0x902007ff: good
	map[14]: type 4, range 32, base 00002400, size  7, enabled
pcib2: (null) requested I/O range 0x2400-0x247f: in range
pcib2: matched entry for 2.0.INTA (src \\_SB_.C046.C0C2:0)
pcib2: slot 0 INTA routed to irq 10 via \\_SB_.C046.C0C2
found->	vendor=0x10ec, dev=0x8139, revid=0x20
	bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns) intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00002000, size  8, enabled
pcib2: (null) requested I/O range 0x2000-0x20ff: in range
	map[14]: type 1, range 32, base 90300000, size  8, enabled
pcib2: (null) requested memory range 0x90300000-0x903000ff: good
pcib2: matched entry for 2.1.INTA (src \\_SB_.C046.C0C3:0)
pcib2: slot 1 INTA routed to irq 10 via \\_SB_.C046.C0C3
found->	vendor=0x8086, dev=0x4220, revid=0x05
	bus=2, slot=2, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000
ns) intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base 90000000, size 12, enabled
pcib2: (null) requested memory range 0x90000000-0x90000fff: good
pcib2: matched entry for 2.2.INTA (src \\_SB_.C046.C0C5:0)
pcib2: slot 2 INTA routed to irq 5 via \\_SB_.C046.C0C5
found->	vendor=0x1524, dev=0x1410, revid=0x01
	bus=2, slot=4, func=0
	class=06-07-00, hdrtype=0x02, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0xc4 (49000 ns), maxlat=0x07 (1750
ns) intpin=a, irq=5
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 90100000, size 12, enabled
pcib2: (null) requested memory range 0x90100000-0x90100fff: good
pcib2: matched entry for 2.4.INTA (src \\_SB_.C046.C0C4:0)
pcib2: slot 4 INTA routed to irq 5 via \\_SB_.C046.C0C4
fwohci0: <VIA Fire II (VT6306)> port 0x2400-0x247f mem
0x90200000-0x902007ff irq 10 at device 0.0 on pci2 fwohci0: Reserved 0x800
bytes for rid 0x10 type 3 at 0x90200000 fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:54:4a:40:02:8e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 1024 bytes.
fwohci0: max_rec 1024 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:40:02:8e
fwe0: bpf attached
fwe0: Ethernet address: 02:02:3f:40:02:8e
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
pcib2: re0 requested I/O range 0x2000-0x20ff: in range
re0: <RealTek 8139C+ 10/100BaseTX> port 0x2000-0x20ff mem
0x90300000-0x903000ff irq 10 at device 1.0 on pci2 pcib2: re0 requested
I/O range 0x2000-0x20ff: in range miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:0f:b0:6c:55:ec
re0: [MPSAFE]
re0: [FAST]
pci2: <network> at device 2.0 (no driver attached)
cbb0: <ENE CB1410 PCI-CardBus Bridge> mem 0x90100000-0x90100fff irq 5 at
device 4.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at
0x90100000 cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x14101524 0x02100007 0x06070001 0x00028008 
  0x10: 0x90100000 0x020000a0 0x20030302 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07440105 
  0x40: 0x08600e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x2040d020 0x00000000 0x00000000 0x001c1112 
  0x90: 0x60440280 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe010001 0x00c00000 0x00008016 0x00000009 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00001000 0x00800080 0x10080400 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4c40-0x4c4f irq 5 at device 31.1 on
pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4c40 ata0: <ATA
channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at
0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x4000-0x40ff,0x4880-0x48bf mem
0xa0200000-0xa02001ff,0xa0300000-0xa03000ff irq 10 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xa0200000 pcm0:
Reserved 0x100 bytes for rid 0x1c type 3 at 0xa0300000 pcm0: [MPSAFE]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D
Stereo Enhancement pcm0: Primary codec extended features variable rate
PCM, reserved 1, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 4e2ce000, 4000; 0xf5a0b000 -> 4e2ce000
pcm0: sndbuf_setmap 4e2bc000, 4000; 0xf5a0f000 -> 4e2bc000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0xe01 0xe11 0xe01 0xe01
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xe01 0xe09 0xe01 0xe01
sio1: <Generic IRDA-compatible device> port 0x3e8-0x3ef,0x7d0-0x7d7 irq 3
drq 3 on acpi0 sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77a irq 7 drq 1
on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 598061766 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
battery0: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
atapicam: atapicam0 already exists; skipping it
ad0: setting PIO4 on ICH4 chip
ad0: setting UDMA100 on ICH4 chip
ad0: 76319MB <TOSHIBA MK8026GAX PA001G> at ata0-master UDMA100
ad0: 156301488 sectors [165398C/15H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
battery0: battery initialization done, tried 1 times
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ICH4 chip
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: reinit done ..
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: <HL-DT-ST DVD-RW GWA-4080N/0C09> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
ATA PseudoRAID loaded
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVD-RW GWA-4080N 0C09> Removable CD-ROM SCSI-0 device 
pass0: 16.000MB/s transfers
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GWA-4080N 0C09> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
splash: image decoder found: logo_saver



cu
  Gerrit



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060803105850.5254d278.gerrit>