Date: 24 Sep 2007 15:02:44 +0200 From: vermaden <vermaden@interia.pl> To: freebsd-x11@freebsd.org Subject: ASUS P5B-MX + 6.2-STABLE + xf86-video-intel Message-ID: <20070924130245.12FEB12390B@f44.poczta.interia.pl>
next in thread | raw e-mail | index | archive | help
Long story short.
Can not get intel driver (from xf86-video-intel 2.1.1) to work with Asus P5=
B-MX IGA.
vesa driver works, but that is not the point here...
kernel config: GENERIC
# uname -a
FreeBSD siewa 6.2-STABLE FreeBSD 6.2-STABLE #0: Mon Sep 24 12:58:17 CEST 20=
07 root@siewa:/usr/obj/usr/src/sys/CUSTOM i386
# kldstat
Id Refs Address Size Name
1 12 0xc0400000 7cfd04 kernel
2 1 0xc0bd0000 6348c acpi.ko
3 1 0xc52b1000 1c000 linux.ko
4 1 0xc5543000 6000 i915.ko
5 1 0xc5549000 f000 drm.ko
# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Mon Sep 24 12:58:17 CEST 2007
root@siewa:/usr/obj/usr/src/sys/CUSTOM
ACPI APIC Table: <A_M_I_ OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU 2160 @ 1.80GHz (1800.01-MHz 686-class=
CPU)
Origin =3D "GenuineIntel" Id =3D 0x6f2 Stepping =3D 2
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=3D0x20100000<NX,LM>
AMD Features2=3D0x1<LAHF>
Cores per package: 2
real memory =3D 1064960000 (1015 MB)
avail memory =3D 1028931584 (981 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 23 at device =
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 19 at device =
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 18 at device =
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 16 at device =
29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9f7c00-0xfe9f7ff=
f irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffc=
ff irq 19 at device 0.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:90:cc:de:5e:0c
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0xc480-0xc487,0xc400-0xc403,0=
x8f0-0x8f7,0x8f8-0x8fb,0xbc00-0xbc0f irq 18 at device 31.1 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0=
xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f irq 19 at device 31.2 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 =
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1800012429 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <SAMSUNG CD-ROM SC-148S/SS03> at ata2-slave PIO4
ad8: 152627MB <WDC WD1600JS-60MHB5 10.02E04> at ata4-master SATA150
Trying to mount root from ufs:/dev/ad8s1a
# pciconf -lv
hostb0@pci0:0:0: class=3D0x060000 card=3D0x823b1043 chip=3D0x2970808=
6 rev=3D0x02 hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D HOST-PCI
none0@pci0:2:0: class=3D0x030000 card=3D0x823b1043 chip=3D0x29728086 rev=3D=
0x02 hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D display
subclass =3D VGA
none1@pci0:27:0: class=3D0x040300 card=3D0x82901043 chip=3D0x27d8808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) High Definition Audio'
class =3D multimedia
uhci0@pci0:29:0: class=3D0x0c0300 card=3D0x81791043 chip=3D0x27c8808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) USB Universal Host Controller'
class =3D serial bus
subclass =3D USB
uhci1@pci0:29:1: class=3D0x0c0300 card=3D0x81791043 chip=3D0x27c9808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) USB Universal Host Controller'
class =3D serial bus
subclass =3D USB
uhci2@pci0:29:2: class=3D0x0c0300 card=3D0x81791043 chip=3D0x27ca808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) USB Universal Host Controller'
class =3D serial bus
subclass =3D USB
uhci3@pci0:29:3: class=3D0x0c0300 card=3D0x81791043 chip=3D0x27cb808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) USB Universal Host Controller'
class =3D serial bus
subclass =3D USB
ehci0@pci0:29:7: class=3D0x0c0320 card=3D0x81791043 chip=3D0x27cc808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class =3D serial bus
subclass =3D USB
pcib1@pci0:30:0: class=3D0x060401 card=3D0x81791043 chip=3D0x244e808=
6 rev=3D0xe1 hdr=3D0x01
vendor =3D 'Intel Corporation'
device =3D '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB =
Hub Interface to PCI Bridge'
class =3D bridge
subclass =3D PCI-PCI
isab0@pci0:31:0: class=3D0x060100 card=3D0x81791043 chip=3D0x27b8808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801GB/GR (ICH7 Family) LPC Interface Controller'
class =3D bridge
subclass =3D PCI-ISA
atapci0@pci0:31:1: class=3D0x01018f card=3D0x81791043 chip=3D0x27df808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) Ultra ATA Storage Controller'
class =3D mass storage
subclass =3D ATA
atapci1@pci0:31:2: class=3D0x01018f card=3D0x81791043 chip=3D0x27c0808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controll=
er'
class =3D mass storage
subclass =3D ATA
none2@pci0:31:3: class=3D0x0c0500 card=3D0x81791043 chip=3D0x27da808=
6 rev=3D0x01 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) SMBus Controller'
class =3D serial bus
subclass =3D SMBus
rl0@pci1:0:0: class=3D0x020000 card=3D0x10015354 chip=3D0x813910ec rev=3D=
0x10 hdr=3D0x00
vendor =3D 'Realtek Semiconductor'
device =3D 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
class =3D network
subclass =3D ethernet
# cat /etc/X11/xorg.conf
Section "ServerLayout"
=09Identifier "X.org Configured"
=09Screen 0 "Screen0" 0 0
=09InputDevice "Mouse0" "CorePointer"
=09InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
=09RgbPath "/usr/local/share/X11/rgb"
=09ModulePath "/usr/local/lib/xorg/modules"
EndSection
Section "Module"
Load "dri"
Load "glx"
=09Load "dbe"
=09Load "extmod"
EndSection
Section "InputDevice"
=09Identifier "Keyboard0"
=09Driver "kbd"
EndSection
Section "InputDevice"
=09Identifier "Mouse0"
=09Driver "mouse"
=09Option=09 "Protocol" "auto"
=09Option=09 "Device" "/dev/sysmouse"
EndSection
Section "Monitor"
=09Identifier "Monitor0"
=09HorizSync 30.0 - 83.0
=09VertRefresh 55.0 - 75.0
=09Option=09 "DPMS"
EndSection
Section "Device"
=09Identifier "Card0"
=09Driver "intel"
EndSection
Section "Screen"
=09Identifier "Screen0"
=09Device "Card0"
=09Monitor "Monitor0"
DefaultDepth 24
=09SubSection "Display"
=09=09Depth 24
=09=09Modes "1280x1024"
=09EndSubSection
EndSection
% startx (as user)
xddc64f78f1b2b3b2d02454c8cd0c339c: not found
xauth: creating new authority file /home/vermaden/.serverauth.860
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: FreeBSD 6.2-STABLE i386=20
Current Operating System: FreeBSD siewa 6.2-STABLE FreeBSD 6.2-STABLE #0: M=
on Sep 24 12:58:17 CEST 2007 root@siewa:/usr/obj/usr/src/sys/CUSTOM i38=
6
Build Date: 31 July 2007
=09Before reporting problems, check http://wiki.x.org
=09to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
=09(++) from command line, (!!) notice, (II) informational,
=09(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 24 14:55:11 2007
(=3D=3D) Using config file: "/etc/X11/xorg.conf"
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low=
?
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low=
?
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low=
?
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low=
?
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low=
?
(EE) intel(0): Couldn't allocate video memory
Fatal server error:
AddScreen/ScreenInit failed for driver 0
X connection to :0.0 broken (explicit kill or server shutdown).
# ls -l /dev/agpgart
ls: /dev/agpgart: No such file or directory
Thanks in advance.
----------------------------------------------------------------------
Gra - zostan agentem ABW!
Zobacz >>> http://link.interia.pl/f1ba5
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070924130245.12FEB12390B>