Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 21 Sep 2009 14:26:15 +0200 (CEST)
From:      kama <kama@pvp.se>
To:        freebsd-stable@freebsd.org
Subject:   FreeBSD 7.2-STABLE boot freeze when calibrating clock.
Message-ID:  <20090921140345.H37424@ns1.as.pvp.se>

next in thread | raw e-mail | index | archive | help

Hi.

I have recently upgraded the server from 6.X -> Latest 6.X -> 7.2. But
after the upgrade it boots OK once and after that it freezes.

Verbose boot give me these lines:

---- snip ----
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #2: Fri Sep 18 13:22:40 CEST 2009
    root@gs4:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e7e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e7e1d8.
Calibrating clock(s) ... i8254 clock: 1193116 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ...
---- snap ----

I can boot the system without ACPI enabled w/o problem. But once it is
enabled it will freeze at this point.

This has happend on both servers I have upgraded. Both of them are
identical.

/Bjorn

Full dmesg w acpi disabled:

%dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #2: Fri Sep 18 13:22:40 CEST 2009
    root@gs4:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 285 (2605.93-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f12  Stepping = 2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x2<CMP>
  Cores per package: 2
real memory  = 3221192704 (3071 MB)
avail memory = 3146604544 (3000 MB)
MPTable: <HP       PROLIANT    >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 28
ioapic3: Assuming intbase of 32
ioapic4: Assuming intbase of 36
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-35 on motherboard
ioapic4 <Version 1.1> irqs 36-39 on motherboard
kbd1 at kbdmux0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <MPTable PCI-PCI bridge> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xf7df0000-0xf7df0fff irq 19 at
device 0.0 on pci1
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xf7de0000-0xf7de0fff irq 19 at
device 0.1 on pci1
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
pci1: <base peripheral> at device 2.0 (no driver attached)
pci1: <base peripheral> at device 2.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0x4400-0x44ff mem
0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 4.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <bridge> at device 4.3 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 7.0 on pci0
pci2: <PCI bus> on pcib2
ciss0: <HP Smart Array 6i> port 0x5000-0x50ff mem
0xf7ef0000-0xf7ef1fff,0xf7e80000-0xf7ebffff irq 24 at device 4.0 on pci2
ciss0: [ITHREAD]
pcib3: <MPTable PCI-PCI bridge> at device 8.0 on pci0
pci3: <PCI bus> on pcib3
bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem
0xf7ff0000-0xf7ffffff irq 28 at device 6.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:17:a4:8d:f9:2a
bge0: [ITHREAD]
bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem
0xf7fe0000-0xf7feffff irq 29 at device 6.1 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: Ethernet address: 00:17:a4:8d:f9:29
bge1: [ITHREAD]
cpu0 on motherboard
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1 on motherboard
powernow1: <Cool`n'Quiet K8> on cpu1
device_attach: powernow1 attach returned 6
cpu2 on motherboard
powernow2: <Cool`n'Quiet K8> on cpu2
device_attach: powernow2 attach returned 6
cpu3 on motherboard
powernow3: <Cool`n'Quiet K8> on cpu3
device_attach: powernow3 attach returned 6
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0755 (System Board)> at slot 0 on eisa0
pnpbios: error 1/82 getting device count/size limit
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <TSSTcorpCD-ROM TS-L162C/N204> at ata0-master UDMA33
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
SdMaP0::  ACPo mCmPaUn d# 1Q uLeauuenicnhge dE!n
abled
da0: 69452MB (142239510 512 bSyMtPe:  sAePc tCoPrUs :# 22 5L5aunHc
h6e3dS/!T
 8854C)
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/da0s1a
bge0: link state changed to UP




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090921140345.H37424>