Date: Wed, 24 Feb 2010 08:52:03 -0800 From: Ted Faber <faber@isi.edu> To: freebsd-stable@freebsd.org Subject: resume slow on Thinkpad T42 FreeBSD 8-STABLE Message-ID: <20100224165203.GA10423@zod.isi.edu>
next in thread | raw e-mail | index | archive | help
--7iMSBzlTiPOCCT2k Content-Type: multipart/mixed; boundary="FCuugMFkClbJLl1L" Content-Disposition: inline --FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, I'm running a recent (yesterday) FreeBSD 8-STABLE on my T42. When I resume from suspend the fan starts screen returns immediately (to text mode) and then the system idles for about a minute until it shakes itself awake. The keyboard LEDs cycle, the disk runs and X returns. I don't recall this stutter under FreeBSD 7. I've tried both settings of hw.acpi.reset_video and neither helps (nor hurts). BIOS is also upgraded to the most recent and the stutter occurred with before and after the upgrade. I have attached a trace of a boot -v going through the cycle. The t_delta entries happen after the machine wakes but before it restores itself. There'a also sometimes a message from acpi_ec0 saying that the EC woke up before the sleep event, but I wasn't able to capture it during this trace. Any help would be appreciated, and I'm happy to provide more data on request. --=20 Ted Faber http://www.isi.edu/~faber PGP: http://www.isi.edu/~faber/pubkeys.= asc Unexpected attachment on this mail? See http://www.isi.edu/~faber/FAQ.html#= SIG --FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.v" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #26: Tue Feb 23 17:40:06 PST 2010 root@praxis.lunabase.org:/usr/obj/usr/src/sys/GENERIC i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc101b000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc101b1a8. Preloaded elf module "/boot/kernel/sound.ko" at 0xc101b254. Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc101b300. Preloaded elf module "/boot/modules/video4bsd.ko" at 0xc101b3b0. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1698567746 Hz CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.57-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6d6 Stepping =3D 6 Features=3D0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMO= V,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=3D0x180<EST,TM2> Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size real memory =3D 1610612736 (1536 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x000000005e412fff, 1560203264 bytes (380909 pages) avail memory =3D 1558867968 (1486 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6d20 bios32: Entry =3D 0xfd750 (c00fd750) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xfd6e0+0x1f6 pnpbios: Found PnP BIOS data at 0xc00f6da0 pnpbios: Entry =3D f0000:b616 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: ULE: setup cpu 0 video4bsd: /dev/video0..9, /dev/video_daemon0..9 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_ra= te_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI: RSDP 0xf6d70 00024 (v2 IBM ) ACPI: XSDT 0x5ff6a672 0004C (v1 IBM TP-1R 00003230 LTP 00000000) ACPI: FACP 0x5ff6a700 000F4 (v3 IBM TP-1R 00003230 IBM 00000001) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100121/tbfadt-62= 5) ACPI Warning: Optional field Gpe1Block has zero address or length: 0= 102C/0 (20100121/tbfadt-655) ACPI: DSDT 0x5ff6a8e7 0C530 (v1 IBM TP-1R 00003230 MSFT 0100000E) ACPI: FACS 0x5ff78000 00040 ACPI: SSDT 0x5ff6a8b4 00033 (v1 IBM TP-1R 00003230 MSFT 0100000E) ACPI: ECDT 0x5ff76e17 00052 (v1 IBM TP-1R 00003230 IBM 00000001) ACPI: TCPA 0x5ff76e69 00032 (v1 IBM TP-1R 00003230 PTL 00000001) ACPI: BOOT 0x5ff76fd8 00028 (v1 IBM TP-1R 00003230 LTP 00000001) npx0: INT 16 interface acpi0: <IBM TP-1R> on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D33408086) pcibios: BIOS version 2.10 AcpiOsDerivePciId: \\_SB_.PCI0.MHCS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PCI1.CBS0.CBUS -> bus 2 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PCI1.CBS1.CBUS -> bus 2 dev 0 func 1 AcpiOsDerivePciId: \\_SB_.PCI0.USB7.U7CS -> bus 0 dev 29 func 7 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc4cb9000 pa 0x1000 atpic: Programming IRQ9 as level/low AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.LPCS -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 5ff00000 (3) failed ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 Validation 0 255 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 Validation 0 255 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 Validation 0 255 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 ACPI: Found matching pin for 0.29.INTD at func 7: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 3: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x3340, revid=3D0x03 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena= bled found-> vendor=3D0x8086, dev=3D0x3341, revid=3D0x03 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x60 (2880 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x24c2, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0x1800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 found-> vendor=3D0x8086, dev=3D0x24c4, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 found-> vendor=3D0x8086, dev=3D0x24c7, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 found-> vendor=3D0x8086, dev=3D0x24cd, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xc0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000 found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x81 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x8080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x24cc, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x24ca, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base 0x1860, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=3D0x8086, dev=3D0x24c3, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x24c5, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x1c00, size 8, enabled map[14]: type I/O Port, range 32, base 0x18c0, size 6, enabled map[18]: type Memory, range 32, base 0xc0000c00, size 9, enabled map[1c]: type Memory, range 32, base 0xc0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x24c6, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled map[14]: type I/O Port, range 32, base 0x2000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB agp0: <Intel 82855 host to AGP bridge> on hostb0 hostb0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x4c57, revid=3D0x00 domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0387, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, ena= bled pcib1: requested memory range 0xe0000000-0xe7ffffff: good map[14]: type I/O Port, range 32, base 0x3000, size 8, enabled pcib1: requested I/O range 0x3000-0x30ff: in range map[18]: type Memory, range 32, base 0xc0100000, size 16, enabled pcib1: requested memory range 0xc0100000-0xc010ffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.LNKA vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7fff= fff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 1= 1 at device 29.0 on pci0 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 1= 1 at device 29.1 on pci0 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 1= 1 at device 29.2 on pci0 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc0000= 3ff irq 11 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.0.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTB at func 1: 11 ACPI: Found matching pin for 2.1.INTA at func 0: 11 ACPI: Found matching pin for 2.2.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x104c, dev=3D0xac46, revid=3D0x01 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xb0000000, size 12, enabled pcib2: requested memory range 0xb0000000-0xb0000fff: good pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=3D0x104c, dev=3D0xac46, revid=3D0x01 domain=3D0, bus=3D2, slot=3D0, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xb1000000, size 12, enabled pcib2: requested memory range 0xb1000000-0xb1000fff: good pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB:0) pcib2: slot 0 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x101e, revid=3D0x03 domain=3D0, bus=3D2, slot=3D1, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0230, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xc0240000, size 17, enabled pcib2: requested memory range 0xc0240000-0xc025ffff: good map[14]: type Memory, range 32, base 0xc0200000, size 16, enabled pcib2: requested memory range 0xc0200000-0xc020ffff: good map[18]: type I/O Port, range 32, base 0x8000, size 6, enabled pcib2: requested I/O range 0x8000-0x803f: in range pcib2: matched entry for 2.1.INTA (src \\_SB_.LNKA:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=3D0x168c, dev=3D0x1014, revid=3D0x01 domain=3D0, bus=3D2, slot=3D2, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0116, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x50 (2400 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x1c (7000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xc0210000, size 16, enabled pcib2: requested memory range 0xc0210000-0xc021ffff: good pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC:0) pcib2: slot 2 INTA routed to irq 11 via \\_SB_.LNKC cbb0: <PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 o= n pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008=20 0x10: 0xb0000000 0x020000a0 0xb0050302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc=20 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b=20 0x40: 0x05521014 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x0840d071 0x040a0000 0x000f0000 0x01d21b22=20 0x90: 0x416402c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 cbb1: <PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 o= n pci2 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: [FILTER] cbb1: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008=20 0x10: 0xb1000000 0x020000a0 0xb0080602 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc=20 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b=20 0x40: 0x05521014 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x0840d071 0x040a0000 0x000f0000 0x01d21b22=20 0x90: 0x416402c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x8000-0x803f mem 0= xc0240000-0xc025ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xc0240000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x8000 em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:11:25:af:f8:9b ath0: <Atheros 5212> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0210000 ath0: [MPSAFE] ath0: [ITHREAD] ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps ath0: AR5212 mac 5.6 RF5111 phy 4.1 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0x1860-0x186f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata1: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c0= 0-0xc0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xc0000c00 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xc0000800 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Analog Devices AD1981B AC97 Codec (id =3D 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Ster= eo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: sndbuf_setmap 213c000, 4000; 0xe5528000 -> 213c000 pcm0: sndbuf_setmap 2140000, 4000; 0xe552c000 -> 2140000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 1: ioport 0x1c00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0x= d1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 101622 -> 100000 procfs registered Timecounter "TSC" frequency 1698567746 Hz quality 800 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000001 ata0: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire battery0: ad0: setting UDMA100 battery initialization start ad0: 38154MB <TOSHIBA MK4026GAX PA107E> at ata0-master UDMA100=20 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acpi_acad0: acline initialization start ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 battery0: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1: Identifying devices: 00010000 ata1: New devices: 00010000 ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire acd0: setting UDMA33 GEOM: ad0s1: geometry does not match label (255h,63s !=3D 16h,63s). acd0: <HL-DT-STCD-RW/DVD DRIVE GCC-4242N/0201> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33=20 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48000 Hz ATA PseudoRAID loaded Root mount waiting for: usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/label/root ct_to_ts([2010-02-24 02:59:39]) =3D 1266980379.000000000 start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: 00:05:4e:48:a4:d3 acd0: FAILURE - ATA_IDENTIFY status=3D51<READY,DSC,ERROR> error=3D4<ABORTED= > LBA=3D0 splash: image decoder found: green_saver drm0: <ATI Radeon LW RV200 Mobility 7500 M7> on vgapci0 vgapci0: Reserved 0x10000 bytes for rid 0x18 type 3 at 0xc0100000 vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized radeon 1.31.0 20080613 vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: Setting AGP v2 mode 4 info: [drm] Setting GART location based on new memory map info: [drm] Loading R100 Microcode info: [drm] writeback test succeeded in 2 usecs drm0: [MPSAFE] drm0: [ITHREAD] acpi_button0: sleep button pressed acpi_lid0: wake_prep enabled for \\_SB_.LID_ (S3) acpi_button0: wake_prep enabled for \\_SB_.SLPB (S3) pci0:1:0:0: Transition from D0 to D3 pci0:2:1:0: Transition from D0 to D3 pci0:2:2:0: Transition from D0 to D3 ct_to_ts([2010-02-24 03:00:27]) =3D 1266980427.000000000 vga0: saving 68 bytes of video state pci0:0:29:7: Transition from D0 to D3 pci0:0:31:5: Transition from D0 to D3 =3D=3D=3D=3D=3D=3D=3D=3D acpi_printcpu() debug dump =3D=3D=3D=3D=3D=3D=3D=3D gdt[0097:c0e112a0] idt[07ff:c0e19900] ldt[0050] tr[0048] efl[00080006] eax[0141e000] ebx[00000000] ecx[c141e000] edx[0141e000] esi[c5206100] edi[00080202] ebp[e7b5bb54] esp[e7b5bb34] cr0[8005003b] cr2[298fe000] cr3[0141e000] cr4[00000691] cs[0020] ds[0028] es[0028] fs[0008] gs[001b] ss[0028] =3D=3D=3D=3D=3D=3D=3D=3D acpi_printcpu() debug dump =3D=3D=3D=3D=3D=3D=3D=3D gdt[0097:c0e112a0] idt[07ff:c0e19900] ldt[0050] tr[0048] efl[00000002] eax[c59ddb01] ebx[00000000] ecx[00000004] edx[c59ddb90] esi[c5206100] edi[00080202] ebp[e7b5bb54] esp[e7b5bb34] cr0[8005003b] cr2[298fe000] cr3[0141e000] cr4[00000691] cs[0020] ds[0028] es[0028] fs[0008] gs[001b] ss[0028] acpi_lid0: run_prep cleaned up for \\_SB_.LID_ acpi_button0: run_prep cleaned up for \\_SB_.SLPB t_delta 15.fbd0cbf2eb820000 too short t_delta 15.fbd0cbf2eb820000 too short t_delta 16.09e0783237180000 too long ct_to_ts([2010-02-24 03:01:38]) =3D 1266980498.000000000 wakeup from sleeping state (slept 00:01:11) ata0: reiniting channel .. ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1 ad0: setting UDMA100 ata0: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 ata1: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000 acd0: setting UDMA33 ata1: reinit done .. atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa battery0: battery initialization start battery0: battery initialization done, tried 1 times agp0: Setting AGP v2 mode 4 info: [drm] Loading R100 Microcode --FCuugMFkClbJLl1L-- --7iMSBzlTiPOCCT2k Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (FreeBSD) iEYEARECAAYFAkuFWTMACgkQaUz3f+Zf+Xt5+gCgwLslpSWSQU+xQkGenPTf7M+u Kh0AnigOveO9eQ4BN2NvhSAFAhUUl5eu =1vA3 -----END PGP SIGNATURE----- --7iMSBzlTiPOCCT2k--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100224165203.GA10423>