Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 13 Jul 1996 13:05:48 -0400
From:      Gary Chrysler <tcg@ime.net>
To:        Greg Lehey <grog@lemis.de>
Cc:        Jim Amy <jimamy@io.org>, FreeBSD Questions <questions@FreeBSD.org>
Subject:   Re: FreeBSD CD Installation
Message-ID:  <31E7D76C.3BEE@ime.net>
References:  <199607131246.OAA11723@allegro.lemis.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Greg Lehey wrote:
> 
	<chomp>
> 
> BTW, Gary's reply could have been construed to suggest that you can
> have more than one slave on an IDE interface.  That's not the case:
> you can have exactly two configurations:
> 
> - 1 drive only
> - 2 drives; one master, one slave.
> 

If thats how it read, I am sorry. That was _not_ my meaning!
No you cannot have TWO masters or TWO slaves on the same
interface! One must be master the other must be slave!

Lets see if I can clearify myself without makeing it worse. :)
I know that the original question involved 1 HD and 1 ATAPI CD.
So the working solution should be:
wd0:	HD master
	CD slave
And rip the secondary IDE controller out.
(What I would of done in the first place!)

My questions now are:
wd0:	HD master
	HD slave
wd1:	CD master
Does this work anyone? (not revelant to original question)

Or MUST it be
wd0:	HD master
	CD slave
wd1:	HD master
(Not revelant to original question)

I am not sure but I belive I read here in -questions that as long
as you do actually have a slave on wd0 that a ATAPI cd will work
on wd1 as master. Am I wrong?? (Not revelant to original question)

It only fails if you _don't_ have a slave on wd0 and try to hook
up an ATAPI cd on wd1 as master. (Revelant to original question)

Thus:
wd0:	HD master
	HD slave
wd1:	CD master
Works?? (not revelant to original question)
or
wd0:	HD master
	CD slave
works. (known) (revelant to the original question)

And
wd0:	HD master
wd1:	CD master
fails. (known) (revelant to the original question)

Is this in fact how it is with FreeBSD 2.1r???
I'm sure that 2.1.5 will have this solved???

I don't have an ATAPI cd (I use SCSI) and would like very much to
clear this up in my own head so I don't confuse those that I am
trying to assist..

Thaks all.

-Enjoy
Gary
~~~~~~~~~~~~~~~~
Improve America's Knowledge... Share yours
The Borg... Where minds meet
(207) 929-3848



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?31E7D76C.3BEE>