Date: Wed, 23 Mar 2005 00:36:13 +0800 From: John Mok <jmok@attglobal.net> To: Roman Kurakin <rik@cronyx.ru> Cc: freebsd-net@freebsd.org Subject: Re: HOWTO connect MCI using Netgraph + Frame Relay with Digi SYNC/570i Message-ID: <4240497D.5030304@attglobal.net> In-Reply-To: <423C72A1.7060000@cronyx.ru> References: <42344AF7.6070701@attglobal.net> <423C72A1.7060000@cronyx.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Dear Roman, Thank you for your information. I have succeeded to setup the frame relay using netgraph. However, I failed to get the interface ng0 up :- #ifconfig ng0 1.2.3.4 255.255.255.0 up ifconfig: interface ng0 does not exist Please help to advise how I could make the interface ng0 appears. Thank you, John Mok Roman Kurakin wrote: > In case you still need this information. > > John Mok: > >> Hi, >> >> I would like to replace the existing Cisco router 1600 and connect to >> MCI Hong Kong with FeeBSD 5.3 box with a Digi SYNC 570 serial card. >> With reference of the FreeBSD handbook and the information from >> Julian Elischer at >> >> http://www.elischer.org/netgraph/ >> >> I have compiled the kernel with the following options :- >> >> .... >> options NETGRAPH >> options NETGRAPH_FRAME_RELAY >> options NETGRAPH_LMI >> .... >> device ar >> >> The dmesg showed that the device ARNET/Digi SYNC/570i was loaded >> successfully. However, when I tried to config. with the following, >> the ngctl prompt with the error: >> >> #ngctl mkpeer ar0: frame_relay rawdata downstream >> #ngctl mkpeer ar0:rawdata lmi dlci500 ansi > > > ngctl mkpeer ar0:rawdata lmi dlci0 annexD > > also you need NETGRAPH_RFC1490 > > ngctl mkpeer ar0:rawdata rfc1490 dlci500 downstream > ngctl mkpeer ar0:rawdata.dlci500 iface inet inet > > and you will get smth like ng0 > > > Best regards, > Roman Kurakin > >> >> ngctl: send msg: No such file or directory >> >> I tried the testing with MCI connection disconnected. How do I set >> the line speed to 1536 Kbps? I hope someone could help me how to >> config. the netgraph with work with Digi SYNC/570i >> >> Thanks a lot. >> >> John Mok >> >> >> _______________________________________________ >> freebsd-net@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-net >> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4240497D.5030304>