Date: Sun, 05 Jun 2005 12:16:35 +1000 From: Dean Hamstead <dean@bong.com.au> To: freebsd-hardware@freebsd.org Subject: freebsd on sgi 1200 Message-ID: <42A26083.9090805@bong.com.au>
next in thread | raw e-mail | index | archive | help
just a quicky installing freebsd on some nice sgi 1200s they are 2ru machines ,dual p3 800, mylex scsi raid intel mainboard freebsd works a treat, except the motherboard has the strangest quirk that only on cold boots does it detect both cpu's. warm reboots cause it to disable the second cpu and thus freebsd doesnt pick up the second cpu (annoying) the same bug is present in all three machines i have im hoping i can just force freebsd to use two cpus oh, i rebuilt the kernel etc, and from a cold boot the mboard picks up both cpu's and so does freebsd and they both work nicely. heres one working nicely root@kusanagi# dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sat Jun 4 00:30:43 EST 2005 dean@kusanagi.bong.com.au.:/usr/obj/usr/src/sys/DEAN0 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (795.90-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 268369920 (255 MB) avail memory = 252968960 (241 MB) ACPI APIC Table: <Intel N440BX > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 15.0 on pci1 pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 9.0 on pci0 pci3: <PCI bus> on pcib3 mlx0: <Mylex version 4 RAID interface> mem 0xf4104000-0xf4105fff irq 19 at device 9.1 on pci0 mlx0: DAC960PTL1, 1 channel, firmware 4.07-0-29, 16MB RAM mlxd0: <Mylex System Drive> on mlx0 mlxd0: 17366MB (35565568 sectors) RAID 1 (online) ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 19 at device 12.0 on pci0 aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2800-0x28ff mem 0xf4102000-0xf4102fff irq 19 at device 12.1 on pci0 aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2000-0x203f mem 0xf4000000-0xf40fffff,0xf4100000-0xf4100fff irq 21 at device 14.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:90:27:f6:1c:11 isab0: <PCI-ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x2040-0x204f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 18.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2060-0x207f irq 21 at device 18.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 18.3 (no driver attached) pci0: <display, VGA> at device 20.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: failed to get status. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x3e8-0x3ef irq 3 on acpi0 sio1: type 16550A orm0: <ISA Option ROMs> at iomem 0xe4000-0xe7fff,0xce000-0xd0fff,0xcd000-0xcdfff,0xc8000-0xccfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: CDROM <CD-540E/1.0A> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/mlxd0s1a heres one not playing nicely Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #1: Sat Jun 4 18:43:16 EST 2005 dean@aramaki.bong.com.au.:/usr/obj/usr/src/sys/DEAN0 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (796.54-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT, PSE36,PN,MMX,FXSR,SSE> real memory = 268369920 (255 MB) avail memory = 252968960 (241 MB) ACPI APIC Table: <Intel N440BX > ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci 0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 15.0 on pci1 pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 9.0 on pci0 pci3: <PCI bus> on pcib3 mlx0: <Mylex version 4 RAID interface> mem 0xf4104000-0xf4105fff irq 19 at device 9.1 o n pci0 mlx0: DAC960PTL1, 1 channel, firmware 4.07-0-29, 16MB RAM mlxd0: <Mylex System Drive> on mlx0 mlxd0: 17366MB (35565568 sectors) RAID 1 (online) ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf410 1fff irq 19 at device 12.0 on pci0 aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2800-0x28ff mem 0xf4102000-0xf410 2fff irq 19 at device 12.1 on pci0 aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2000-0x203f mem 0xf4000000-0xf40fffff,0xf41 00000-0xf4100fff irq 21 at device 14.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:d0:b7:a8:4d:51 isab0: <PCI-ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x2040-0x204f,0x376,0x170-0x177,0x3f6,0x1 f0-0x1f7 at device 18.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2060-0x207f irq 21 at device 18 .2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 18.3 (no driver attached) pci0: <display, VGA> at device 20.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: failed to get status. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x3e8-0x3ef irq 3 on acpi0 sio1: type 16550A orm0: <ISA Option ROMs> at iomem 0xe4000-0xe7fff,0xce000-0xd0fff,0xcd000-0xcdfff,0xc800 0-0xccfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 796540596 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDROM <CD-540E/1.0A> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/mlxd0s1a you can see the intel mainboard, with onboard adaptec scsi and intel network card onboard. the mylex is add-in but as you can see works well. just the wretchid second cpu! Dean -- WWW: http://dean.bong.com.au LAN: http://www.bong.com.au EMAIL: dean@bong.com.au or djzort@bong.com.au ICQ: 16867613
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42A26083.9090805>