Date: Sat, 07 Jun 2008 10:58:19 -0400 From: Steve Bertrand <steve@ibctech.ca> To: erpa1119 <erpa1119@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: wireless help Message-ID: <484AA20B.2070500@ibctech.ca> In-Reply-To: <17709547.post@talk.nabble.com> References: <17709547.post@talk.nabble.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> topology: > wall-->bellsouth router-->linksys AP > linksys has a static IP of 192.168.1.3 > bellsouth router has a static IP of 192.168.1.254 You need to configure different prefixes (aka subnets) on each side of the Linksys router: LAN side on Bellsouth: 192.168.1.254 255.255.255.0 WAN side on Linksys: 192.168.1.3 255.255.255.0 LAN (wifi) side of Linksys: 192.168.2.1 255.255.255.0 Laptop: 192.168.2.2 255.255.255.0 Laptop gateway: 192.168.2.1 A trick I recommend very frequently to our ADSL subs that want to implement a wireless router into their network who are already using our equipment that has NAT enabled (to avoid double-NAT), is to disable DHCP on the LAN side of the Linksys, disable the WAN interface, and connect the ADSL modem to one of the LAN ports on the Linksys. Essentially, your access point will then be just that. Hope I understood your problem properly. Steve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?484AA20B.2070500>