Date: Tue, 20 Sep 2011 01:37:10 -0400 From: Naoyuki Tai <ntai@smartfruit.com> To: freebsd-arm@freebsd.org Subject: GlobalScale DreamPlug + FreeBSD 8.2 release Message-ID: <4E782686.6070500@smartfruit.com>
next in thread | raw e-mail | index | archive | help
Hello, I'm new to the FreeBSD/arm, bought a DreamPlug from GlobalScale, hoping to turn it into a FreeBSD file server. I followed the "http://wiki.freebsd.org/FreeBSDMarvell", and created kernel.bin. After giving it a "go", it hangs. I must have built the kernel.bin wrong but I have no clue as to what I did wrong. Any clue/help is appreciated. Thanks! -- Tai U-Boot 2011.06-02334-g8f495d9-dirty (May 31 2011 - 02:06:26) Marvell-DreamPlug SoC: Kirkwood 88F6281_A0 CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM: 512 MiB SF: Detected MX25L1606 with page size 256, total 1 MiB In: serial Out: serial Err: serial Net: egiga0, egiga1 88E1116 Initialized on egiga0 88E1116 Initialized on egiga1 Hit any key to stop autoboot: 0 Marvell>> setenv serverip 192.168.10.3 Marvell>> setenv ipaddr 192.168.10.55 Marvell>> tftpboot 6400000 arm/kernel.bin Using egiga0 device TFTP from server 192.168.10.3; our IP address is 192.168.10.55 Filename 'arm/kernel.bin'. Load address: 0x6400000 Loading: ################################################################# ################################################################# ################################################################# ############################ done Bytes transferred = 3272884 (31f0b4 hex) Marvell>> go 0x6400000 ## Starting application at 0x06400000 ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E782686.6070500>