Date: Fri, 11 Jul 2014 07:35:16 -0400 From: Anthony Jenkins <Anthony.B.Jenkins@att.net> To: Daniele Mazzotti <kappei84@gmail.com> Cc: freebsd-acpi@freebsd.org Subject: Re: ACPI support - Freebsd 10 on Sony Vaio VPCCA3C5E Message-ID: <53BFCBF4.2090104@att.net> In-Reply-To: <CAC=ypSUe0_09pTMFsMKw4u3J=Kb8Q_uV0g6%2Bk_f2p1so3mnTgA@mail.gmail.com> References: <CAC=ypSVopgcL82FpqJosmgFeRkeeevP0RG-GrAEZD2YQyi%2BPrg@mail.gmail.com> <53BF0546.70505@att.net> <CAC=ypSUe0_09pTMFsMKw4u3J=Kb8Q_uV0g6%2Bk_f2p1so3mnTgA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Daniele, I was just going from acpi(4) man page; you'll likely have to build a new kernel with 'options ACPI_DEBUG' added to your kernel config file, as I don't know if it's even possible to turn on the logging I want at runtime. [ajenkins@ajenkins-hplaptop /usr/home/ajenkins]$ grep -i acpi /usr/src/sys/amd64/conf/MYKERNEL device acpi options ACPI_DEBUG I also have an 'options ACPI_DMAR' , but I don't recognize that and you don't need that to debug your battery. Anthony On 07/11/2014 01:58, Daniele Mazzotti wrote: > Hello Anthony, > > thanks for the quick reply! I tried what you suggested. > > loader.conf: > > # Module for Windows Partition & Linux Mount > fuse_load="YES" > autoboot_delay="5" > #acpi_sony_load="YES" > > # Debugging Symbols for ACPI > debug.acpi.layer="ACPI_BATTERY" > debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" > debug.acpi.enable_debug_objects="1" > > sysctl hw.acpi.battery: > > hw.acpi.battery.life: -1 > hw.acpi.battery.time: -1 > hw.acpi.battery.state: 7 > hw.acpi.battery.units: 1 > hw.acpi.battery.info_expire: 5 > > log/messages: > > cat /var/log/messages | grep acpi > > Jul 11 07:30:47 Von-Neumann kernel: acpi0: <Sony> on motherboard > Jul 11 07:30:47 Von-Neumann kernel: acpi_ec0: <Embedded Controller: GPE > 0x17, ECDT> port 0x62,0x66 on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: hpet0: <High Precision Event Timer> > iomem 0xfed00000-0xfed003ff on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: atrtc0: <AT realtime clock> port > 0x70-0x77 irq 8 on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: attimer0: <AT timer> port > 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_timer0: <24-bit timer at > 3.579545MHz> port 0x408-0x40b on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> port > 0xcf8-0xcff on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: battery0: <ACPI Control Method Battery> > on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_acad0: <AC Adapter> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_lid0: <Control Method Lid Switch> > on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_button0: <Power Button> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: atkbdc0: <Keyboard controller (i8042)> > port 0x60,0x64 irq 1 on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: <Sony notebook controller> > on acpi0 > Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: PID 0 > Jul 11 07:37:54 Von-Neumann kernel: acpi0: <Sony> on motherboard > Jul 11 07:37:54 Von-Neumann kernel: acpi_ec0: <Embedded Controller: GPE > 0x17, ECDT> port 0x62,0x66 on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: hpet0: <High Precision Event Timer> > iomem 0xfed00000-0xfed003ff on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: atrtc0: <AT realtime clock> port > 0x70-0x77 irq 8 on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: attimer0: <AT timer> port > 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: acpi_timer0: <24-bit timer at > 3.579545MHz> port 0x408-0x40b on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> port > 0xcf8-0xcff on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: battery0: <ACPI Control Method Battery> > on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: acpi_acad0: <AC Adapter> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: acpi_lid0: <Control Method Lid Switch> > on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: acpi_button0: <Power Button> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on acpi0 > Jul 11 07:37:54 Von-Neumann kernel: atkbdc0: <Keyboard controller (i8042)> > port 0x60,0x64 irq 1 on acpi0 > > It seems to me the verbose debugging is either not enabled (perhaps I made > some mistakes with the loader.conf) or the debug is really enabled but > there is no special output on the wrong log file. Actually I am a bit > puzzled as I am not a real expert "admin". I only enjoy getting my hands on > Unix on my desktop PC just for fun. > > However, do you think either I missed something or made anything wrong? > I look forward to receiving from you. > > Cheers, > Daniele. > > > > 2014-07-10 23:27 GMT+02:00 Anthony Jenkins <Anthony.B.Jenkins@att.net>: > >> On 07/10/2014 16:49, Daniele Mazzotti wrote: >>> Hello there, >>> >>> it is been a while since I finished installing Freebsd 10 on my Sony Vaio >>> PC and resolving (or at least I am trying to) one by one, all the >> problems >>> this hardware is giving me. Actually I cannot find a solution to >> correctly >>> display the battery level on my laptop. If I unplug my PC from the power >>> and type 'sysctl hw.acpi.battery' this is the result I get: >>> >>> hw.acpi.battery.life: -1 >>> hw.acpi.battery.time: -1 >>> hw.acpi.battery.state: 7 >>> hw.acpi.battery.units: 1 >>> hw.acpi.battery.info_expire: 5 >>> >>> Moreover the suspend mode is giving me some problems as well, but this >> has >>> definitely a lower priority. >>> >>> I either tried to search for a solution on the FreeBSD Handook with no >>> luck, and google the problem a little bit, but I could not find any >>> valuable help. I would be really interested to investigate the problem >>> further. Is there anyone who can help me out with this and tell me what >>> pieces of information are needed to better understand the problem? >> Try enabling the ACPI_BATTERY layer and ACPI_LV_ALL_EXCEPTIONS level in >> /boot/loader.conf: >> >> debug.acpi.layer="ACPI_BATTERY" >> debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" >> debug.acpi.enable_debug_objects="1" # I assume this is how you >> turn on ACPI debugging without recompiling the kernel with 'options >> ACPI_DEBUG' >> >> and running 'sysctl hw.acpi.battery' again. Post /var/log/messages ACPI >> messages about battery here. >> >> Anthony >> >>> Cheers, >>> Daniele. >>> _______________________________________________ >>> freebsd-acpi@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >>> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" >>> >> > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53BFCBF4.2090104>