Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 06 Nov 2014 01:20:47 +0000
From:      Steven Hartland <killing@multiplay.co.uk>
To:        freebsd-stable@freebsd.org
Subject:   Re: 10.1 RC4 r273903 - zpool scrub on ssd mirror - ahci command timeout
Message-ID:  <545ACCEF.5000300@multiplay.co.uk>
In-Reply-To: <20141106012739.509b96b5@orwell>
References:  <20141106003240.344dedf6@orwell> <545AB64F.1060502@multiplay.co.uk> <20141106012739.509b96b5@orwell>

next in thread | previous in thread | raw e-mail | index | archive | help
Try recabling and re-seating, if it still happens try to identify if its 
the disk or backplane by moving it in the chassis. We had a machine here 
recently where it was backplane issue and simply replacing it fixed the 
issue.


On 06/11/2014 00:27, Kai Gallasch wrote:
> Am Wed, 05 Nov 2014 23:44:15 +0000
> schrieb Steven Hartland <killing@multiplay.co.uk>:
>
>> Looks like a HW issue, how is it connected to the controller and what
>> is the controller?
> It's a SUN X2270 M1 server with 4 SATA connected disks.
>
> The (2.5") SSD drives are inside SUN 3.5" disk carriers and are sitting
> on top of a 2.5" to 3.5" converter - like this one here
> http://goo.gl/yBfS1V
>
>
> dmesg.out:
>
>
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.1-RC4 #0 r273903: Fri Oct 31 15:32:22 CET 2014
>      kgal@beltwaybandit.free.de:/usr/obj/usr/src/sys/X2270-10 amd64
> FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
> CPU: Intel(R) Xeon(R) CPU           L5520  @ 2.27GHz (2266.80-MHz K8-class CPU)
>    Origin = "GenuineIntel"  Id = 0x106a5  Family = 0x6  Model = 0x1a  Stepping = 5
>    Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>    Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
>    AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>    AMD Features2=0x1<LAHF>
>    VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID
>    TSC: P-state invariant, performance statistics
> real memory  = 51539607552 (49152 MB)
> avail memory = 50000900096 (47684 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <040910 APIC1030>
> FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
> FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
>   cpu0 (BSP): APIC ID: 16
>   cpu1 (AP): APIC ID: 17
>   cpu2 (AP): APIC ID: 18
>   cpu3 (AP): APIC ID: 19
>   cpu4 (AP): APIC ID: 20
>   cpu5 (AP): APIC ID: 21
>   cpu6 (AP): APIC ID: 22
>   cpu7 (AP): APIC ID: 23
>   cpu8 (AP): APIC ID:  0
>   cpu9 (AP): APIC ID:  1
>   cpu10 (AP): APIC ID:  2
>   cpu11 (AP): APIC ID:  3
>   cpu12 (AP): APIC ID:  4
>   cpu13 (AP): APIC ID:  5
>   cpu14 (AP): APIC ID:  6
>   cpu15 (AP): APIC ID:  7
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> random: <Software, Yarrow> initialized
> module_register_init: MOD_LOAD (vesa, 0xffffffff8085c590, 0) error 19
> kbd1 at kbdmux0
> cryptosoft0: <software crypto> on motherboard
> acpi0: <040910 XSDT1030> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, bff00000 (3) failed
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> cpu8: <ACPI CPU> on acpi0
> cpu9: <ACPI CPU> on acpi0
> cpu10: <ACPI CPU> on acpi0
> cpu11: <ACPI CPU> on acpi0
> cpu12: <ACPI CPU> on acpi0
> cpu13: <ACPI CPU> on acpi0
> cpu14: <ACPI CPU> on acpi0
> cpu15: <ACPI CPU> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 350
> Event timer "HPET1" frequency 14318180 Hz quality 340
> Event timer "HPET2" frequency 14318180 Hz quality 340
> Event timer "HPET3" frequency 14318180 Hz quality 340
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci4: <ACPI PCI bus> on pcib1
> igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xec00-0xec1f mem 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 40 at device 0.0 on pci4
> igb0: Using MSIX interrupts with 5 vectors
> igb0: Ethernet address: 00:14:4f:ca:a9:00
> igb0: Bound queue 0 to cpu 0
> igb0: Bound queue 1 to cpu 1
> igb0: Bound queue 2 to cpu 2
> igb0: Bound queue 3 to cpu 3
> igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xe880-0xe89f mem 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbe3c000-0xfbe3ffff irq 28 at device 0.1 on pci4
> igb1: Using MSIX interrupts with 5 vectors
> igb1: Ethernet address: 00:14:4f:ca:a9:01
> igb1: Bound queue 0 to cpu 4
> igb1: Bound queue 1 to cpu 5
> igb1: Bound queue 2 to cpu 6
> igb1: Bound queue 3 to cpu 7
> pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci3: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> pci2: <ACPI PCI bus> on pcib3
> pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
> pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
> pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
> pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
> uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
> uhci0: LegSup = 0x2f00
> usbus0 on uhci0
> uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb480-0xb49f irq 21 at device 26.1 on pci0
> uhci1: LegSup = 0x2f00
> usbus1 on uhci1
> uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xb400-0xb41f irq 19 at device 26.2 on pci0
> uhci2: LegSup = 0x2f00
> usbus2 on uhci2
> ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbdf4000-0xfbdf43ff irq 18 at device 26.7 on pci0
> usbus3: EHCI version 1.0
> usbus3 on ehci0
> uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc000-0xc01f irq 23 at device 29.0 on pci0
> uhci3: LegSup = 0x2f00
> usbus4 on uhci3
> uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xbc00-0xbc1f irq 19 at device 29.1 on pci0
> uhci4: LegSup = 0x2f00
> usbus5 on uhci4
> uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb880-0xb89f irq 18 at device 29.2 on pci0
> uhci5: LegSup = 0x2f00
> usbus6 on uhci5
> ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbdf6000-0xfbdf63ff irq 23 at device 29.7 on pci0
> usbus7: EHCI version 1.0
> usbus7 on ehci1
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib4
> vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfb000000-0xfb7fffff,0xfafe0000-0xfaffffff irq 16 at device 5.0 on pci1
> vgapci0: Boot video device
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel ICH10 AHCI SATA controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc41f mem 0xfbdfa000-0xfbdfa7ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> ahciem0: <AHCI enclosure management bridge> on ahci0
> acpi_button0: <Power Button> on acpi0
> ipmi0: <IPMI System Interface> port 0xca2,0xca6 on acpi0
> ipmi0: KCS mode found at io 0xca2 on acpi
> qpi0: <QPI system bus> on motherboard
> pcib5: <QPI Host-PCI bridge> pcibus 255 on qpi0
> pci255: <PCI bus> on pcib5
> pcib6: <QPI Host-PCI bridge> pcibus 254 on qpi0
> pci254: <PCI bus> on pcib6
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: CGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff irq 4 on isa0
> uart0: console (115200,n,8,1)
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> coretemp4: <CPU On-Die Thermal Sensors> on cpu4
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> coretemp5: <CPU On-Die Thermal Sensors> on cpu5
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> coretemp6: <CPU On-Die Thermal Sensors> on cpu6
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> coretemp7: <CPU On-Die Thermal Sensors> on cpu7
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> coretemp8: <CPU On-Die Thermal Sensors> on cpu8
> est8: <Enhanced SpeedStep Frequency Control> on cpu8
> p4tcc8: <CPU Frequency Thermal Control> on cpu8
> coretemp9: <CPU On-Die Thermal Sensors> on cpu9
> est9: <Enhanced SpeedStep Frequency Control> on cpu9
> p4tcc9: <CPU Frequency Thermal Control> on cpu9
> coretemp10: <CPU On-Die Thermal Sensors> on cpu10
> est10: <Enhanced SpeedStep Frequency Control> on cpu10
> p4tcc10: <CPU Frequency Thermal Control> on cpu10
> coretemp11: <CPU On-Die Thermal Sensors> on cpu11
> est11: <Enhanced SpeedStep Frequency Control> on cpu11
> p4tcc11: <CPU Frequency Thermal Control> on cpu11
> coretemp12: <CPU On-Die Thermal Sensors> on cpu12
> est12: <Enhanced SpeedStep Frequency Control> on cpu12
> p4tcc12: <CPU Frequency Thermal Control> on cpu12
> coretemp13: <CPU On-Die Thermal Sensors> on cpu13
> est13: <Enhanced SpeedStep Frequency Control> on cpu13
> p4tcc13: <CPU Frequency Thermal Control> on cpu13
> coretemp14: <CPU On-Die Thermal Sensors> on cpu14
> est14: <Enhanced SpeedStep Frequency Control> on cpu14
> p4tcc14: <CPU Frequency Thermal Control> on cpu14
> coretemp15: <CPU On-Die Thermal Sensors> on cpu15
> est15: <Enhanced SpeedStep Frequency Control> on cpu15
> p4tcc15: <CPU Frequency Thermal Control> on cpu15
> random: unblocking device.
> usbus0: 12Mbps Full Speed USB v1.0
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> usbus1: 12Mbps Full Speed USB v1.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 480Mbps High Speed USB v2.0
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> ipmi0: IPMI device rev. 1, firmware rev. 3.00, version 2.0
> uhub0: 2 ports with 2 removable, self powered
> ipmi0: Number of channels 5
> ipmi0: Attached watchdog
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> uhub1: 2 ports with 2 removable, self powered
> ada0: <HITACHI HUA7250SBSUN500G 0944JWRUMF GK6OAC5A> ATA-7uhub2: 2 ports with 2 removable, self powered
>   SATA 2.x device
> ada0: Serial Number GTA460P6GWRUMF
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> uhub4: 2 ports with 2 removable, self powered
> ada1: <HITACHI HUA7250SBSUN500G 0911JS4H0F GK6OAC5A> ATA-7uhub5: 2 ports with 2 removable, self powered
>   SATA 2.x device
> ada1: Serial Number GTF402P6GS4H0F
> ada1: 300.000MB/s transfersuhub6: 2 ports with 2 removable, self powered
>   (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad6
> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
> ada2: <Samsung SSD 850 PRO 512GB EXM01B6Q> ATA-9 SATA 3.x device
> ada2: Serial Number S1SXNSAFA06834H
> ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
> ada2: Command Queueing enabled
> ada2: 488386MB (1000215216 512 byte sectors: 16H 63S/T 16383C)
> ada2: Previously was known as ad8
> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
> ada3: <Samsung SSD 850 PRO 512GB EXM01B6Q> ATA-9 SATA 3.x device
> ada3: Serial Number S1SXNSAFA06835A
> ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
> ada3: Command Queueing enabled
> ada3: 488386MB (1000215216 512 byte sectors: 16H 63S/T 16383C)
> ada3: Previously was known as ad10
> ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
> ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
> ses0: SEMB SES Device
> GEOM_MIRROR: Device mirror/swap launched (2/2).
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #8 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #9 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #14 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #10 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #13 Launched!
> SMP: AP CPU #12 Launched!
> SMP: AP CPU #15 Launched!
> SMP: AP CPU #11 Launched!
> SMP: AP CPU #4 Launched!
> Timecounter "TSC-low" frequency 1133397512 Hz quality 1000
> Root mount waiting for: usbus7 usbus3
> Root mount waiting for: usbus7 usbus3
> uhub3: 6 ports with 6 removable, self powered
> uhub7: 6 ports with 6 removable, self powered
> Root mount waiting for: usbus7 usbus3
> ugen3.2: <American Megatrends Inc.> at usbus3
> usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
> Root mount waiting for: usbus7
> ugen7.2: <JetFlash> at usbus7
> umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 2> on usbus7
> umass0:  SCSI over Bulk-Only; quirks = 0x0100
> umass0:7:0:-1: Attached to scbus7
> da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
> da0: <JetFlash Transcend 4GB 1100> Removable Direct Access SCSI-4 device
> da0: Serial Number 82L68FGM1BTVJHR0
> da0: 40.000MB/s transfers
> da0: 3861MB (7907328 512 byte sectors: 255H 63S/T 492C)
> da0: quirks=0x12<NO_6_BYTE,NO_RC16>
> ugen2.2: <American Megatrends Inc.> at usbus2
> ukbd0: <Keyboard Interface> on usbus2
> Trying to mount root from zfs:rpool/ROOT/r273903-10.1 []...
> kbd2 at ukbd0
> ums0: <Mouse Interface> on usbus2
> ums0: 3 buttons and [XY] coordinates ID=0
> ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4
> kbd3 at ukbd1
> ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4
> ums1: 5 buttons and [XYZ] coordinates ID=1
> ugen4.2: <vendor 0x04d9> at usbus4 (disconnected)
> ukbd1: at uhub4, port 2, addr 2 (disconnected)
> ums1: at uhub4, port 2, addr 2 (disconnected)
> ugen4.2: <vendor 0x04d9> at usbus4
> ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4
> kbd3 at ukbd1
> ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4
> ums1: 5 buttons and [XYZ] coordinates ID=1
>
>
>
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?545ACCEF.5000300>