Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 26 Apr 2007 11:21:43 -0500
From:      Derek Ragona <derek@computinginnovations.com>
To:        jhall@vandaliamo.net, freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 6.2 Boot Issue
Message-ID:  <6.0.0.22.2.20070426112024.026c7ec0@mail.computinginnovations.com>
In-Reply-To: <2172.65.117.48.155.1177602567.squirrel@admintool.trueband. net>
References:  <2172.65.117.48.155.1177602567.squirrel@admintool.trueband.net>

next in thread | previous in thread | raw e-mail | index | archive | help
At 10:49 AM 4/26/2007, jhall@vandaliamo.net wrote:
>I have installed FreeBSD 6.2 on an HP Proliant G5 server with an E200i
>Smart Controller installed.  The installation was flawless.
>
>When I reboot the server after the installation, the boot loader screen is
>displayed.  I press F1 and the system beeps and comes back to the boot
>loader prompt.
>
>What should I be looking at?  I am at a loss since I usually end up with
>leftover hardware and this time I acutally got to purchase new hardware
>just for this project.
>
>Any suggestions would be greatly appreciated.
>
>Thanks for your help.

Check your BIOS that you are ALLOWING the boot sector to be written.

If that is OK, try disabling hyperthreading if that is turned on in your BIOS.

         -Derek

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20070426112024.026c7ec0>