Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 15 Dec 2006 15:48:39 +0100
From:      Palle Girgensohn <girgen@FreeBSD.org>
To:        questions@freebsd.org
Cc:        shigeaki@se.hiroshima-u.ac.jp, obrien@freebsd.org
Subject:   if_nfe on nVidia chipset
Message-ID:  <92F17ADAEC575CF1EDBE870C@rambutan.pingpong.net>

next in thread | raw e-mail | index | archive | help
--==========77CD9078C0D16C366468==========
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hi! Sorry for the cross post, I'd love to know if I can get this working or 
not.

Regards,
Palle

---------- Forwarded Message ----------
Date: tisdag, december 12, 2006 18.52.35 +0100
From: Palle Girgensohn <girgen@FreeBSD.org>
To: hardware@freebsd.org
Subject: if_nfe on Asus M2N-SLI deluxe?

Hi!

Does anybody know if if_nfe should work on the above motherboard? I snached
the patch for FreeBSD-6.2 from
<http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>; and
tried it. The kernel and ifconfig seems happy, but it does not work;
ifconfig reports "active" but ifconfig reports:

nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:17:31:86:aa:31
        media: Ethernet autoselect (none)
        status: no carrier
nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4
inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:17:31:86:b4:c6
        media: Ethernet autoselect (none)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128        inet6 fe80::1%lo0 prefixlen 64
scopeid 0x5        inet 127.0.0.1 netmask 0xff000000
The media part of nfe1 looks bad, eh?

Is it supposed to work? How can I help to get it working?

FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else needed?

/Palle



---------- End Forwarded Message ----------




--==========77CD9078C0D16C366468==========
Content-Type: message/rfc822; name="if_nfe on Asus M2N-SLI deluxe?"

Return-Path: <owner-freebsd-hardware@freebsd.org>
Received: from melon.pingpong.net ([unix socket])
	by melon.pingpong.net (Cyrus v2.2.12) with LMTPA;
	Tue, 12 Dec 2006 19:05:37 +0100
X-Sieve: CMU Sieve 2.2
Received: from localhost (localhost.pingpong.net [127.0.0.1])
	by melon.pingpong.net (Postfix) with ESMTP id 2929F5087D
	for <bb+freebsd.hardware@melon.pingpong.net>;
	Tue, 12 Dec 2006 19:05:37 +0100 (CET)
Received: from melon.pingpong.net ([127.0.0.1])
	by localhost (melon.pingpong.net [127.0.0.1]) (amavisd-new, port 10024)
	with LMTP id 79691-01-45 for <bb+freebsd.hardware@melon.pingpong.net>; 
	Tue, 12 Dec 2006 19:05:36 +0100 (CET)
Received: from mx2.freebsd.org (mx2.freebsd.org [69.147.83.53])
	by melon.pingpong.net (Postfix) with ESMTP id 3024850852
	for <bb+freebsd.hardware@partitur.se>;
	Tue, 12 Dec 2006 19:05:36 +0100 (CET)
Received: from hub.freebsd.org (hub.freebsd.org [69.147.83.54])
	by mx2.freebsd.org (Postfix) with ESMTP id 1B06E53B22;
	Tue, 12 Dec 2006 17:52:44 +0000 (GMT)
	(envelope-from owner-freebsd-hardware@freebsd.org)
Received: from hub.freebsd.org (localhost [127.0.0.1])
	by hub.freebsd.org (Postfix) with ESMTP id D1F6016A591;
	Tue, 12 Dec 2006 17:52:46 +0000 (UTC)
	(envelope-from owner-freebsd-hardware@freebsd.org)
X-Original-To: hardware@freebsd.org
Delivered-To: freebsd-hardware@FreeBSD.ORG
Received: from mx1.FreeBSD.org (mx1.freebsd.org [69.147.83.52])
	by hub.freebsd.org (Postfix) with ESMTP id 7D05C16A40F;
	Tue, 12 Dec 2006 17:52:40 +0000 (UTC)
	(envelope-from girgen@FreeBSD.org)
Received: from melon.pingpong.net (melon.pingpong.net [195.178.174.161])
	by mx1.FreeBSD.org (Postfix) with ESMTP id F3E9F43CB8;
	Tue, 12 Dec 2006 17:51:13 +0000 (GMT)
	(envelope-from girgen@FreeBSD.org)
Received: from localhost (localhost.pingpong.net [127.0.0.1])
	by melon.pingpong.net (Postfix) with ESMTP id DD6C950890;
	Tue, 12 Dec 2006 18:52:48 +0100 (CET)
Received: from melon.pingpong.net ([127.0.0.1])
	by localhost (melon.pingpong.net [127.0.0.1]) (amavisd-new, port 10024)
	with LMTP id 68252-03-5; Tue, 12 Dec 2006 18:52:48 +0100 (CET)
Received: from [192.168.1.187] (unknown [213.136.40.204])
	by melon.pingpong.net (Postfix) with ESMTP id 938C750853;
	Tue, 12 Dec 2006 18:52:48 +0100 (CET)
Date: Tue, 12 Dec 2006 18:52:35 +0100
From: Palle Girgensohn <girgen@FreeBSD.org>
To: hardware@freebsd.org
Message-ID: <CE58D1E977FAEE998E36C40F@rambutan.pingpong.net>
X-Mailer: Mulberry/4.0.6 (Linux/x86)
MIME-Version: 1.0
Content-Type: multipart/mixed;
	boundary="==========7E13988D9A82C0ED67D9=========="
X-Virus-Scanned: by amavisd-new at pingpong.net
Cc: obrien@freebsd.org
Subject: if_nfe on Asus M2N-SLI deluxe?
X-BeenThere: freebsd-hardware@freebsd.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: General discussion of FreeBSD hardware <freebsd-hardware.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-hardware>, 
	<mailto:freebsd-hardware-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-hardware>;
List-Post: <mailto:freebsd-hardware@freebsd.org>
List-Help: <mailto:freebsd-hardware-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-hardware>, 
	<mailto:freebsd-hardware-request@freebsd.org?subject=subscribe>
Sender: owner-freebsd-hardware@freebsd.org
Errors-To: owner-freebsd-hardware@freebsd.org
X-Virus-Scanned: by amavisd-new at pingpong.net

--==========7E13988D9A82C0ED67D9==========
Content-Type: text/plain; charset=us-ascii; DELSP=yes; FORMAT=flowed
Content-Transfer-Encoding: 7bit

Hi!

Does anybody know if if_nfe should work on the above motherboard? I snached
the patch for FreeBSD-6.2 from
<http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>; and
tried it. The kernel and ifconfig seems happy, but it does not work;
ifconfig reports "active" but ifconfig reports:

nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:17:31:86:aa:31
        media: Ethernet autoselect (none)
        status: no carrier
nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4 
        inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:17:31:86:b4:c6
        media: Ethernet autoselect (none)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 
        inet 127.0.0.1 netmask 0xff000000 

The media part of nfe1 looks bad, eh?

Is it supposed to work? How can I help to get it working?

FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else needed?

/Palle



--==========7E13988D9A82C0ED67D9==========
Content-Type: text/plain; charset=utf-8; name="dmesg.boot"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="dmesg.boot"; size=8114

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006
    girgen@rambutan.pingpong.net:/usr/obj/.a/banan/usr/src/sys/WORKSTATION
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x40ff2  Stepping =3D 2
  =
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC=
A,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=3D0x2001<SSE3,CX16>
  AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=3D0x1d<LAHF,<b2>,<b3>,CR8>
real memory  =3D 2146369536 (2046 MB)
avail memory =3D 2091245568 (1994 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at =
device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 =
at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port =
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem =
0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port =
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem =
0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port =
0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem =
0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem =
0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:ce:11:26
fwohci0: <Texas Instruments TSB43AB22/A> mem =
0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on pci1
fwohci0: OHCI version 1.10 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:c8:2b:85
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85
fwe0: Ethernet address: 02:11:d8:c8:2b:85
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem =
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at =
device 8.0 on pci0
miibus1: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, =
auto
nfe0: Ethernet address: 00:17:31:86:aa:31
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem =
0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at =
device 9.0 on pci0
miibus2: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, =
auto
nfe1: Ethernet address: 00:17:31:86:b4:c6
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci4: <JMicron JMB363 SATA300 controller> port =
0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f mem =
0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6
atapci4: AHCI Version 01.00 controller with 2 ports detected
ata8: <ATA channel 0> on atapci4
ata9: <ATA channel 1> on atapci4
ata10: <ATA channel 2> on atapci4
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci7: <ACPI PCI bus> on pcib7
nvidia0: <GeForce 6200 TurboCache(TM)> mem =
0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16 at =
device 0.0 on pci7
nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on =
acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1
kbd1 at ukbd0
uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass 3/1
ums0: 6 buttons and Z dir.
Timecounter "TSC" frequency 2210201999 Hz quality 800
Timecounters tick every 0.801 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, =
default to accept, logging disabled
ad0: 152627MB <Seagate ST3160212A 3.AAJ> at ata0-master UDMA100
acd0: DVDR <Optiarc DVD RW AD-5170A/1.11> at ata0-slave UDMA66
cd0 at ata0 bus 0 target 1 lun 0
cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device=20
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a

--==========7E13988D9A82C0ED67D9==========
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
--==========7E13988D9A82C0ED67D9==========--


--==========77CD9078C0D16C366468==========--




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?92F17ADAEC575CF1EDBE870C>