Date: Sun, 18 Apr 2010 16:07:56 +0100 From: Rui Paulo <rpaulo@freebsd.org> To: Alexander Motin <mav@FreeBSD.org> Cc: FreeBSD-Current <freebsd-current@freebsd.org>, Michael Butler <imb@protected-networks.net> Subject: Re: Re: SVN rev 206755 breakage Message-ID: <9B82ED79-C168-482C-A3A9-26D71060BB0F@freebsd.org> In-Reply-To: <4BCB03AA.1050405@FreeBSD.org> References: <4BCA325A.1060600@protected-networks.net> <mailpost.1271550720.7316110.69309.mailing.freebsd.current@FreeBSD.cs.nctu.edu.tw> <4BCA9F44.50002@FreeBSD.org> <987831E7-4893-4F2F-B96F-A1E25BD9BCA0@freebsd.org> <4BCB03AA.1050405@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 18 Apr 2010, at 14:05, Alexander Motin wrote:
> Rui Paulo wrote:
>> On 18 Apr 2010, at 06:57, Alexander Motin wrote:
>>> Rui Paulo wrote:
>>>> On 17 Apr 2010, at 23:12, Michael Butler wrote:
>>>>> On 04/17/10 18:05, Rui Paulo wrote:
>>>>>> On 17 Apr 2010, at 22:34, Michael Butler wrote:
>>>>>>> The revision labeled:
>>>>>>>=20
>>>>>>> SVN rev 206755 on 2010-04-17 11:40:39Z by rpaulo
>>>>>>>=20
>>>>>>> Add another ICH7M chipset that works.
>>>>>>>=20
>>>>>>> .. is incorrect and will cause some laptops to not boot.
>>>>>> So, in AHCI mode it doesn't find the disks?
>>>>> No - the driver fails to attach (ENXIO).
>>>> But since ahci failed to attach, won't atapci attach later?
>>> If probe succeeded - no.
>>>=20
>>>> Can you show me the dmesg?
>>> More important probably would be `pciconf -lvcb`.
>>>=20
>>> Intel controllers after ICH6 change both ID and set of resources,
>>> depending on AHCI enabled in BIOS. There is separate set of IDs for
>>> controllers with AHCI enabled. As I can see, Linux handles ID 0x27c4 =
as
>>> non-AHCI SATA. If for some reason this ID could be used for both =
modes
>>> (I have doubts),
>>=20
>> It can be used in both modes. atapci used to attach to it on my =
MacBook.
>=20
> Most of AHCI controllers could also work as usual PCI ATA, but not =
every
> PCI ATA could work as AHCI. It would be nice to compare `pciconf =
-lvbc`
> output in both working (Rui) and not working (Michael) cases.
atapci0@pci0:0:31:1: class=3D0x01018a card=3D0x72708086 =
chip=3D0x27df8086 rev=3D0x02 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801G (ICH7 Family) Ultra ATA Storage Controller'
class =3D mass storage
subclass =3D ATA
bar [10] =3D type I/O Port, range 32, base 0x1f0, size 8, enabled
bar [14] =3D type I/O Port, range 32, base 0x3f4, size 1, enabled
bar [18] =3D type I/O Port, range 32, base 0x170, size 8, enabled
bar [1c] =3D type I/O Port, range 32, base 0x374, size 1, enabled
bar [20] =3D type I/O Port, range 32, base 0x20c0, size 16, =
enabled
ahci0@pci0:0:31:2: class=3D0x01018f card=3D0x72708086 =
chip=3D0x27c48086 rev=3D0x02 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82801GBM/GHM (ICH7-M Family) Serial ATA Storage =
Controller'
class =3D mass storage
subclass =3D ATA
bar [10] =3D type I/O Port, range 32, base 0x20d8, size 8, =
enabled
bar [14] =3D type I/O Port, range 32, base 0x20fc, size 4, =
enabled
bar [18] =3D type I/O Port, range 32, base 0x20d0, size 8, =
enabled
bar [1c] =3D type I/O Port, range 32, base 0x20f8, size 4, =
enabled
bar [20] =3D type I/O Port, range 32, base 0x2020, size 16, =
enabled
bar [24] =3D type Memory, range 32, base 0x90445000, size 1024, =
enabled
cap 01[70] =3D powerspec 2 supports D0 D3 current D0
BTW, Mac OS X also uses AHCI on this controller.
--
Rui Paulo=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9B82ED79-C168-482C-A3A9-26D71060BB0F>