Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Dec 2014 16:02:14 +0000
From:      Dr Josef Karthauser <joe@tao.org.uk>
To:        Steven Hartland <killing@multiplay.co.uk>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: Creating a bootable ZFS disk?
Message-ID:  <C0A39010-8EBD-46C6-8AA5-B7970DF5280B@tao.org.uk>
In-Reply-To: <54A1129F.3040004@multiplay.co.uk>
References:  <54a048f2.45c1c20a.6ffd.ffffe6d7SMTPIN_ADDED_BROKEN@mx.google.com> <54A062FE.6020500@multiplay.co.uk> <54A067D0.4050606@multiplay.co.uk> <349F0A87-5F85-4367-9A5C-E77DBFA16588@karthauser.co.uk> <7E1DA790-822F-4253-A3F6-1E5F5EFFEE04@karthauser.co.uk> <54A1129F.3040004@multiplay.co.uk>

next in thread | previous in thread | raw e-mail | index | archive | help

--Apple-Mail=_9F252658-77B8-40A8-95AB-954BE6034E61
Content-Type: multipart/mixed;
	boundary="Apple-Mail=_FB67C5FF-E782-463B-934A-982D105A8B3E"


--Apple-Mail=_FB67C5FF-E782-463B-934A-982D105A8B3E
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	charset=windows-1252

On 29 Dec 2014, at 08:36, Steven Hartland <killing@multiplay.co.uk> =
wrote:
> That looks like a 10.0 boot not a 10.1 boot could you confirm and =
provide a 10.1 boot if thats the case please Joe?

Whoops! Sorry.

Attached is a verbose boot time dmesg for the 10.1 that causes the =
problem under load.
I immediately rebooted back onto 10.0, so the (un-verbose) dmesg for =
that follows.

Joe


--Apple-Mail=_FB67C5FF-E782-463B-934A-982D105A8B3E
Content-Disposition: attachment;
	filename=dmesg.boot
Content-Type: application/octet-stream;
	name="dmesg.boot"
Content-Transfer-Encoding: 7bit

Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 22h27m52s
usbus0: Controller shutdown
uhub5: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x04d9> at usbus0 (disconnected)
ukbd0: at uhub5, port 4, addr 2 (disconnected)
uhid0: at uhub5, port 4, addr 2 (disconnected)
usbus0: Controller shutdown complete
usbus1: Controller shutdown
uhub4: at usbus1, port 1, addr 1 (disconnected)
usbus1: Controller shutdown complete
usbus2: Controller shutdown
uhub3: at usbus2, port 1, addr 1 (disconnected)
usbus2: Controller shutdown complete
usbus3: Controller shutdown
uhub2: at usbus3, port 1, addr 1 (disconnected)
usbus3: Controller shutdown complete
usbus4: Controller shutdown
uhub1: at usbus4, port 1, addr 1 (disconnected)
usbus4: Controller shutdown complete
usbus5: Controller shutdown
uhub0: at usbus5, port 1, addr 1 (disconnected)
Table 'FACP' at 0xd7fa0290
Table 'APIC' at 0xd7fa0390
APIC: Found table at 0xd7fa0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81bc6000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81bc6d08.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81bc7530.
Calibrating TSC clock ... TSC clock: 1497542139 Hz
CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f63  Family = 0x10  Model = 0x6  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
  TSC: P-state invariant
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 8589934592 (8192 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009afff, 569344 bytes (139 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000001bed000 - 0x00000000d7f8ffff, 3594137600 bytes (877475 pages)
0x00000000d7f9e000 - 0x00000000d7f9ffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x0000000212220fff, 4599189504 bytes (1122849 pages)
avail memory = 8141561856 (7764 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     ProLiant>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
XEN: CPU 0 has VCPU ID 1
XEN: CPU 1 has VCPU ID 2
x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x09a000-0x09afff at 0xfffffe01ea9fe000
x86bios: EBDA 0x09e000-0x09ffff at 0xfffff8000009e000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf8f50 00024 (v02 HP    )
ACPI: XSDT 0xd7fa0100 0007C (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: FACP 0xd7fa0290 000F4 (v03 HP     ProLiant 20110729 HP   00000097)
ACPI: DSDT 0xd7fa0620 06947 (v01 HP     ProLiant 00000006 INTL 20051117)
ACPI: FACS 0xd7fae000 00040
ACPI: APIC 0xd7fa0390 00072 (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: MCFG 0xd7fa0410 0003C (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: SPMI 0xd7fa0450 00041 (v05 HP     ProLiant 20110729 HP   00000097)
ACPI: OEMB 0xd7fae040 00072 (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: HPET 0xd7fab4e0 00038 (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: EINJ 0xd7fab520 00130 (v01  AMIER AMI_EINJ 20110729 HP   00000097)
ACPI: BERT 0xd7fab6b0 00030 (v01  AMIER AMI_BERT 20110729 HP   00000097)
ACPI: ERST 0xd7fab6e0 001B0 (v01  AMIER AMI_ERST 20110729 HP   00000097)
ACPI: HEST 0xd7fab890 000A8 (v01  AMIER ABC_HEST 20110729 HP   00000097)
ACPI: SSDT 0xd7fab940 00458 (v01 HP     ProLiant 00000001 AMD  00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
Hardware, Intel Secure Key RNG: RDRAND is not present
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
null: <null device, zero device>
nfslock: pseudo-device
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
VESA: INT 0x10 vector 0xc000:0x03ce
VESA: information block
0000   56 45 53 41 00 03 d4 01 00 c0 01 00 00 00 44 00
0010   00 98 00 01 5e 0a 03 01 00 c0 95 00 00 c0 60 4f
0020   00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040   00 00 00 00 00 01 01 01 03 01 05 01 07 01 11 01
0050   14 01 17 01 1a 01 0e 01 20 01 93 01 95 01 96 01
0060   b3 01 b5 01 b6 01 c3 01 c5 01 c6 01 33 01 35 01
0070   36 01 53 01 55 01 56 01 63 01 65 01 66 01 21 01
0080   22 01 23 01 24 01 43 01 45 01 46 01 73 01 75 01
0090   76 01 83 01 85 01 86 01 d3 01 d5 01 d6 01 e3 01
00a0   e5 01 e6 01 ff ff 00 00 00 00 00 00 00 00 00 00
00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100   11 40 72 61 64 65 00 6f 6e 6b 6d 73 66 77 5f 00
0110   52 45 44 57 4f 4f 44 5f 14 72 6c 66 53 3b 28 80
0120   64 74 6e 50 66 73 63 6c a0 82 0c 28 80 6e 00 67
0130   5f 73 6f 63 6b 65 74 cd 98 42 42 29 80 02 3c 64
0140   65 05 01 08 d5 05 84 05 06 34 80 70 70 74 70 67
0150   16 72 05 ba 8a 81 7e 29 00 67 65 6f 00 6d 5f 6d
0160   6f 75 6e 74 76 2c 65 72 00 c4 7c 82 61 28 40 66
0170   75 96 73 98 7a 0c 5c ac 37 80 76 6d 07 3d 0b 0c
0180   1d 80 06 c8 2f 80 74 61 63 61 cc 72 64 88 ba 0c
0190   5d 36 60 08 08 12 40 d0 61 63 6c 5f 02 02 34 00
01a0   41 89 3e 10 00 00 a4 66 24 40 74 34 5f 88 74 6f
01b0   6d 9c 3e 00 00 1c 35 00 5c 66 77 05 42 08 55 84
01c0   05 b8 2a 40 6e 50 67 5f 61 74 a8 80 97 28 c0 73
01d0   00 79 73 74 72 61 63 65 5f 00 66 72 65 65 62 73
01e0   64 33 16 32 00 cc 68 87 6f 28 80 6d 66 69 0b 74
01f0   31 30 4e 92 2c 80 74 61 72 5f 2c 73 61 0e 7d 89
VESA: 48 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xfffffe01ea9ff044 (98000044)
VESA: ATI ATOMBIOS
VESA: (C) 1988-2005, ATI Technologies Inc.  RS880 01.00
io: <I/O>
VMBUS: load
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
hptnr: R750/DC7280 controller driver v1.0.1
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <HP ProLiant> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: OEMN 0xd7faaeb0 00624 (v01 AMD    NAHP     00000001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: OEMN 0 00624 (v01 AMD    NAHP     00000001 INTL 20051117)
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of fed80000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, d7f00000 (3) failed
cpu0: Processor \134_PR_.P001 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: Processor \134_PR_.P002 (ACPI ID 2) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
ACPI: Processor \134_PR_.P003 (ACPI ID 3) ignored
ACPI: Processor \134_PR_.P004 (ACPI ID 4) ignored
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x4353, rev 0x10, 14318180Hz, 3 timers, legacy route
hpet0:  t0: irqs 0x00c00000 (0), MSI, periodic
hpet0:  t1: irqs 0x00c00000 (0), MSI, periodic
hpet0:  t2: irqs 0x00c00000 (0), MSI, periodic
Timecounter "HPET" frequency 14318180 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 0 vector 51
msi: routing MSI-X IRQ 257 to local APIC 0 vector 52
msi: routing MSI-X IRQ 258 to local APIC 0 vector 53
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
ACPI timer: 1/2 1/2 1/2 1/2 1/2 0/2292 1/2 1/2 1/2 1/2 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 14 15
  Validation          0  255   N     0  4 7 10 11 14 15
  After Disable       0  255   N     0  4 7 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xdffff
pcib0: decoding 3 range 0xd8000000-0xdfffffff
pcib0: decoding 3 range 0xf0000000-0xfebfffff
pcib0: decoding 3 range 0xd8000000-0xdfffffff
pcib0: decoding 3 range 0xf0000000-0xffffffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1022, dev=0x9601, revid=0x00
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x103c, dev=0x9602, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x9604, revid=0x00
	domain=0, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found->	vendor=0x1022, dev=0x9606, revid=0x00
	domain=0, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found->	vendor=0x1002, dev=0x4391, revid=0x40
	domain=0, bus=0, slot=17, func=0
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	MSI supports 8 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0xc000, size  3, enabled
pcib0: allocated type 4 (0xc000-0xc007) for rid 10 of pci0:0:17:0
	map[14]: type I/O Port, range 32, base 0xb000, size  2, enabled
pcib0: allocated type 4 (0xb000-0xb003) for rid 14 of pci0:0:17:0
	map[18]: type I/O Port, range 32, base 0xa000, size  3, enabled
pcib0: allocated type 4 (0xa000-0xa007) for rid 18 of pci0:0:17:0
	map[1c]: type I/O Port, range 32, base 0x9000, size  2, enabled
pcib0: allocated type 4 (0x9000-0x9003) for rid 1c of pci0:0:17:0
	map[20]: type I/O Port, range 32, base 0x8000, size  4, enabled
pcib0: allocated type 4 (0x8000-0x800f) for rid 20 of pci0:0:17:0
	map[24]: type Memory, range 32, base 0xfe5ffc00, size 10, enabled
pcib0: allocated type 3 (0xfe5ffc00-0xfe5fffff) for rid 24 of pci0:0:17:0
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4397, revid=0x00
	domain=0, bus=0, slot=18, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 32, base 0xfe5fe000, size 12, enabled
pcib0: allocated type 3 (0xfe5fe000-0xfe5fefff) for rid 10 of pci0:0:18:0
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 18
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x4396, revid=0x00
	domain=0, bus=0, slot=18, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe5ff800, size  8, enabled
pcib0: allocated type 3 (0xfe5ff800-0xfe5ff8ff) for rid 10 of pci0:0:18:2
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
found->	vendor=0x1002, dev=0x4397, revid=0x00
	domain=0, bus=0, slot=19, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 32, base 0xfe5fd000, size 12, enabled
pcib0: allocated type 3 (0xfe5fd000-0xfe5fdfff) for rid 10 of pci0:0:19:0
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x4396, revid=0x00
	domain=0, bus=0, slot=19, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe5ff400, size  8, enabled
pcib0: allocated type 3 (0xfe5ff400-0xfe5ff4ff) for rid 10 of pci0:0:19:2
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found->	vendor=0x1002, dev=0x4385, revid=0x42
	domain=0, bus=0, slot=20, func=0
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x439d, revid=0x40
	domain=0, bus=0, slot=20, func=3
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4384, revid=0x40
	domain=0, bus=0, slot=20, func=4
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4397, revid=0x00
	domain=0, bus=0, slot=22, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 32, base 0xfe5fc000, size 12, enabled
pcib0: allocated type 3 (0xfe5fc000-0xfe5fcfff) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 18
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x4396, revid=0x00
	domain=0, bus=0, slot=22, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe5ff000, size  8, enabled
pcib0: allocated type 3 (0xfe5ff000-0xfe5ff0ff) for rid 10 of pci0:0:22:2
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x1022, dev=0x1200, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1201, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1202, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1203, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1204, revid=0x00
	domain=0, bus=0, slot=24, func=4
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib1
pcib0: allocated type 3 (0xfe600000-0xfe7fffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xf0000000-0xf7ffffff) for rid 24 of pcib1
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xd000-0xdfff
pcib1:   memory decode     0xfe600000-0xfe7fffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
pcib1:   special decode    VGA
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x9712, revid=0x00
	domain=0, bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled
pcib1: allocated prefetch range (0xf0000000-0xf7ffffff) for rid 10 of pci0:1:5:0
	map[14]: type I/O Port, range 32, base 0xd000, size  8, enabled
pcib1: allocated I/O port range (0xd000-0xd0ff) for rid 14 of pci0:1:5:0
	map[18]: type Memory, range 32, base 0xfe7f0000, size 16, enabled
pcib1: allocated memory range (0xfe7f0000-0xfe7fffff) for rid 18 of pci0:1:5:0
	map[24]: type Memory, range 32, base 0xfe600000, size 20, enabled
pcib1: allocated memory range (0xfe600000-0xfe6fffff) for rid 24 of pci0:1:5:0
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfe7f0000-0xfe7fffff,0xfe600000-0xfe6fffff irq 18 at device 5.0 on pci1
vgapci0: Boot video device
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib2: allocating non-ISA range 0xe000-0xe0ff
pcib0: allocated type 4 (0xe000-0xe0ff) for rid 1c of pcib2
pcib2: allocating non-ISA range 0xe400-0xe4ff
pcib0: allocated type 4 (0xe400-0xe4ff) for rid 1c of pcib2
pcib2: allocating non-ISA range 0xe800-0xe8ff
pcib0: allocated type 4 (0xe800-0xe8ff) for rid 1c of pcib2
pcib2: allocating non-ISA range 0xec00-0xecff
pcib0: allocated type 4 (0xec00-0xecff) for rid 1c of pcib2
pcib0: allocated type 3 (0xfe800000-0xfe8fffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xe000-0xefff
pcib2:   memory decode     0xfe800000-0xfe8fffff
pcib2:   special decode    ISA
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfe8e0000, size 17, enabled
pcib2: allocated memory range (0xfe8e0000-0xfe8fffff) for rid 10 of pci0:2:0:0
	map[14]: type Memory, range 32, base 0xfe800000, size 19, enabled
pcib2: allocated memory range (0xfe800000-0xfe87ffff) for rid 14 of pci0:2:0:0
	map[18]: type I/O Port, range 32, base 0xe800, size  5, enabled
pcib2: allocated I/O port range (0xe800-0xe81f) for rid 18 of pci0:2:0:0
	map[1c]: type Memory, range 32, base 0xfe8dc000, size 14, enabled
pcib2: allocated memory range (0xfe8dc000-0xfe8dffff) for rid 1c of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xe800-0xe81f mem 0xfe8e0000-0xfe8fffff,0xfe800000-0xfe87ffff,0xfe8dc000-0xfe8dffff irq 16 at device 0.0 on pci2
em0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 259 to local APIC 0 vector 54
msi: routing MSI-X IRQ 260 to local APIC 0 vector 55
msi: routing MSI-X IRQ 261 to local APIC 0 vector 56
em0: using IRQs 259-261 for MSI-X
em0: Using MSIX interrupts with 3 vectors
em0: bpf attached
em0: Ethernet address: 68:05:ca:29:db:0b
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib0: allocated type 3 (0xfe900000-0xfe9fffff) for rid 20 of pcib3
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   memory decode     0xfe900000-0xfe9fffff
pcib3:   special decode    ISA
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x14e4, dev=0x165b, revid=0x10
	domain=0, bus=3, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
pcib3: allocated memory range (0xfe9f0000-0xfe9fffff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 262 to local APIC 0 vector 57
bge0: using IRQ 262 for MSI
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: OUI 0x000af7, model 0x003a, rev. 4
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 3c:d9:2b:0c:f5:2e
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0
ahci0: attempting to allocate 8 MSI vectors (8 supported)
msi: routing MSI IRQ 263 to local APIC 0 vector 64
msi: routing MSI IRQ 264 to local APIC 0 vector 65
msi: routing MSI IRQ 265 to local APIC 0 vector 66
msi: routing MSI IRQ 266 to local APIC 0 vector 67
msi: routing MSI IRQ 267 to local APIC 0 vector 68
msi: routing MSI IRQ 268 to local APIC 0 vector 69
msi: routing MSI IRQ 269 to local APIC 0 vector 70
msi: routing MSI IRQ 270 to local APIC 0 vector 71
ahci0: using IRQs 263-270 for MSI
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd eSATA 6ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps: ESP
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps: ESP
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps: ESP
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps: ESP
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps: ESP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: ESP
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 18 at device 18.0 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 58
usbus0 on ohci0
ohci0: usbpf: Attached
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 59
ehci0: Dropped interrupts workaround enabled
usbus1: EHCI version 1.0
usbus1 on ehci0
ehci0: usbpf: Attached
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ohci1: usbpf: Attached
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 17 at device 19.2 on pci0
ehci1: Dropped interrupts workaround enabled
usbus3: EHCI version 1.0
usbus3 on ehci1
ehci1: usbpf: Attached
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   special decode    ISA, subtractive
pcib4: could not get PCI interrupt routing table for \134_SB_.PCI0.P0PC - AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 22.0 on pci0
usbus4 on ohci2
ohci2: usbpf: Attached
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff000-0xfe5ff0ff irq 17 at device 22.2 on pci0
ehci2: Dropped interrupts workaround enabled
usbus5: EHCI version 1.0
usbus5 on ehci2
ehci2: usbpf: Attached
acpi_button0: <Power Button> on acpi0
ACPI: Enabled 4 GPEs in block 00 to 1F
acpi0: wakeup code va 0xfffffe0231ec5000 pa 0x90000
ex_isa_identify()
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd2000-0xd2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd2000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbdc0: AT keyboard controller not found
atkbdc0 failed to probe at port 0x60,0x64 on isa0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Device configuration finished.
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
procfs registered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA connect time=100us status=00000123
ahcich1: AHCI reset: device found
ahcich2: AHCI reset...
ahcich2: SATA connect time=100us status=00000123
ahcich2: AHCI reset: device found
ahcich3: AHCI reset...
ahcich3: SATA connect time=100us status=00000123
ahcich3: AHCI reset: device found
ugen3.1: <ATI> at usbus3
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <ATI> at usbus0
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen5.1: <ATI> at usbus5
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ahcich3: AHCI reset: device ready after 1ms
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ahcich5: SATA connect time=100us status=00000123
ahcich5: AHCI reset: device found
ahcich0: AHCI reset: device ready after 100ms
ahcich1: AHCI reset: device ready after 100ms
ahcich2: AHCI reset: device ready after 100ms
ahcich5: AHCI reset: device ready after 100ms
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
pass0: Serial Number WD-WCC4MDFLEL2P
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
pass1: Serial Number WD-WCC4MPYVZX2H
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
pass2 at ahcich2 bus 0 scbus2 target 0 lun 0
pass2: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
pass2: Serial Number WD-WCC4MDTJCKYN
pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass2: Command Queueing enabled
pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
pass3: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
pass3: Serial Number WD-WCC4MPYVZSVV
pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass3: Command Queueing enabled
pass4 at ahcich5 bus 0 scbus5 target 0 lun 0
pass4: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
pass4: Serial Number WD-WCC4MKLH07U2
pass4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass4: Command Queueing enabled
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada0: Serial Number WD-WCC4MDFLEL2P
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
GEOM: new disk ada0
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada1: Serial Number WD-WCC4MPYVZX2H
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada2: Serial Number WD-WCC4MDTJCKYN
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada3: Serial Number WD-WCC4MPYVZSVV
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad10
ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
ada4: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada4: Serial Number WD-WCC4MKLH07U2
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada4: quirks=0x1<4K>
ada4: Previously was known as ad14
GEOM: new disk ada1
GEOM: new disk ada2
GEOM: new disk ada3
GEOM: new disk ada4
Netvsc initializing... done!
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 49
msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 50
msi: Assigning MSI-X IRQ 260 to local APIC 1 vector 51
msi: Assigning MSI IRQ 262 to local APIC 1 vector 52
SMP: passed TSC synchronization test
Timecounter "TSC" frequency 1497542139 Hz quality 800
uhub5: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus5 usbus3 usbus1
Root mount waiting for: usbus5 usbus3 usbus1
uhub4: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub0: 5 ports with 5 removable, self powered
Trying to mount root from zfs:storage/ROOT/default []...
ugen0.2: <vendor 0x04d9> at usbus0
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/4.03, addr 2> on usbus0
kbd0 at ukbd0
kbd0: ukbd0, generic (0), config:0x0, flags:0x3d0000
start_init: trying /sbin/init
bge0: Disabling fastboot
bge0: Disabling fastboot
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/4.03, addr 2> on usbus0
em0: Link is up 1000 Mbps Full Duplex
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
ipfw0: bpf attached
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 done
All buffers synced.
Swap device diskid/DISK-WD-WCC4MPYVZSVVp2 removed.
Swap device diskid/DISK-WD-WCC4MDTJCKYNp2 removed.
Swap device diskid/DISK-WD-WCC4MDFLEL2Pp2 removed.
Uptime: 1m7s
bge0: Disabling fastboot
bge0: link DOWN
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE-p7 #0: Tue Jul  8 06:37:44 UTC 2014
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.55-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f63  Family = 0x10  Model = 0x6  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8143388672 (7766 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of fed80000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, d7f00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfe7f0000-0xfe7fffff,0xfe600000-0xfe6fffff irq 18 at device 5.0 on pci1
vgapci0: Boot video device
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xe800-0xe81f mem 0xfe8e0000-0xfe8fffff,0xfe800000-0xfe87ffff,0xfe8dc000-0xfe8dffff irq 16 at device 0.0 on pci2
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 68:05:ca:29:db:0b
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 3c:d9:2b:0c:f5:2e
ahci0: <ATI IXP700 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 22.0 on pci0
usbus4 on ohci2
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff000-0xfe5ff0ff irq 17 at device 22.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci2
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xd2000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen5.1: <ATI> at usbus5
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <ATI> at usbus0
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada0: Serial Number WD-WCC4MDFLEL2P
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada1: Serial Number WD-WCC4MPYVZX2H
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada2: Serial Number WD-WCC4MDTJCKYN
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada3: Serial Number WD-WCC4MPYVZSVV
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad10
ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
ada4: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada4: Serial Number WD-WCC4MKLH07U2
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada4: quirks=0x1<4K>
ada4: Previously was known as ad14
Netvsc initializing... SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1497545937 Hz quality 800
uhub1: 4 ports with 4 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
Root mount waiting for: usbus5 usbus3 usbus1
uhub0: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
Root mount waiting for: usbus1
Trying to mount root from zfs:storage/ROOT/default []...
ugen0.2: <vendor 0x04d9> at usbus0
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/4.03, addr 2> on usbus0
kbd0 at ukbd0
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/4.03, addr 2> on usbus0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled

--Apple-Mail=_FB67C5FF-E782-463B-934A-982D105A8B3E
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=windows-1252



--Apple-Mail=_FB67C5FF-E782-463B-934A-982D105A8B3E--

--Apple-Mail=_9F252658-77B8-40A8-95AB-954BE6034E61
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename=signature.asc
Content-Type: application/pgp-signature;
	name=signature.asc
Content-Description: Message signed with OpenPGP using GPGMail

-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org

iQEcBAEBCgAGBQJUoXsGAAoJEGdCjs+EVN/YEbYH/jO/4rxVlvDnaPinzBDff3YE
kNMiV6xLTPGdHZpS/9h0sSbWoAGYIv4OA3e7tn19EXZ7eNBQGmNtfbukwxm7XcmC
3bCTOlSoAYz3kCqzxFiLWNggH+77zL0fPD32ULeZXHcUPd7cvCCBNg8onTBPsb+i
A48Cta9n7sf/bDrTiuOwkm28hd/T+SA58rCObv1h1+ZP+nDPJXZ/XR5D44Aoaj9H
GqlKng6WTBuOBJDX0kZkQ0phHRqSvuK0+no0zGO8BywP2788gkD/M8xFgJ2pCqDi
KBq/VwCpR6fcfbCnVUHPZbHdu5nEkjVZdKMLzB5OlDSgukQBZxoVba/uSVPWQnc=
=JNY9
-----END PGP SIGNATURE-----

--Apple-Mail=_9F252658-77B8-40A8-95AB-954BE6034E61--





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C0A39010-8EBD-46C6-8AA5-B7970DF5280B>