Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Dec 2013 10:48:58 -0800
From:      Adrian Chadd <adrian@freebsd.org>
To:        =?UTF-8?B?5LmU5qWa?= <honestqiao@gmail.com>
Cc:        Current FreeBSD <freebsd-current@freebsd.org>
Subject:   Re: Intel Centrino Wireless-N 1000 can't connect to AP
Message-ID:  <CAJ-Vmo=P21DGeqrywEbcLmxB7MC9x8_dbFrwivhn-wmZfKyPXQ@mail.gmail.com>
In-Reply-To: <CAMAY4VgKjxdrNZHiciTr1keYZVFWkO65u=hkgxtxAmAeHKdiQA@mail.gmail.com>
References:  <CAMAY4VgKjxdrNZHiciTr1keYZVFWkO65u=hkgxtxAmAeHKdiQA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
OK, I'll see if my centrino 1xx / 1xxx units match yours and are problemati=
c.

Please file a PR!


-a

On 7 December 2013 05:34, =E4=B9=94=E6=A5=9A <honestqiao@gmail.com> wrote:
> Today ,I upgrade my freebsd from 10-beta4 to current.
> Now, my freebsd can't connect to wireless AP. Wireless LAN strike.
>
> iwn0 in /var/log/message:
> Dec  7 08:02:00 x201i kernel: iwn0: <Intel Centrino Wireless-N 1000> mem
> 0xf2400000-0xf2401fff irq 16 at device 0.0 on pci2
>
> Dec  7 08:02:00 x201i kernel: iwn0: attempting to allocate 1 MSI vectors =
(1
> supported)
> Dec  7 08:02:00 x201i kernel: msi: routing MSI IRQ 266 to local APIC 0
> vector 62
> Dec  7 08:02:00 x201i kernel: iwn0: using IRQ 266 for MSI
> Dec  7 08:02:00 x201i kernel: iwn0: MIMO 1T2R, BGS, address
> 8c:a9:82:5a:41:58
> Dec  7 08:02:00 x201i kernel: iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 1T2R
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 20MHz
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 6.5Mbps - 65Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 20MHz SGI
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 7Mbps - 72Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 40MHz:
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 13.5Mbps - 135Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 40MHz SGI:
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 15Mbps - 150Mbps
> ......
> Dec  7 08:02:00 x201i kernel: wlan0: Ethernet address: f0:de:f1:52:cf:16
> Dec  7 08:02:00 x201i kernel: iwn0: iwn_intr: fatal firmware error
> Dec  7 08:02:00 x201i kernel: firmware error log:
> Dec  7 08:02:00 x201i kernel: error type      =3D "SYSASSERT" (0x00000005=
)
> Dec  7 08:02:00 x201i kernel: program counter =3D 0x00018DBC
> Dec  7 08:02:00 x201i kernel: source line     =3D 0x00000032
> Dec  7 08:02:00 x201i kernel: error data      =3D 0x0000000100000000
> Dec  7 08:02:00 x201i kernel: branch link     =3D 0x00018D6E00018D6E
> Dec  7 08:02:00 x201i kernel: interrupt link  =3D 0x0000082600000000
> Dec  7 08:02:00 x201i kernel: time            =3D 1538064582
> Dec  7 08:02:00 x201i kernel: driver status:
> Dec  7 08:02:00 x201i kernel: tx ring  0: qid=3D0  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  1: qid=3D1  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  2: qid=3D2  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  3: qid=3D3  cur=3D2   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  4: qid=3D4  cur=3D57  queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  5: qid=3D5  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  6: qid=3D6  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  7: qid=3D7  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  8: qid=3D8  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring  9: qid=3D9  cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 10: qid=3D10 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 11: qid=3D11 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 12: qid=3D12 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 13: qid=3D13 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 14: qid=3D14 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 15: qid=3D15 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 16: qid=3D16 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 17: qid=3D17 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 18: qid=3D18 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: tx ring 19: qid=3D19 cur=3D0   queued=3D0--
> Dec  7 08:02:00 x201i kernel: rx ring: cur=3D29
> ......
> Dec  7 08:02:01 x201i wpa_supplicant[667]: ioctl[SIOCS80211, op=3D103, va=
l=3D0,
> arg_len=3D128]: Device not configured
> Dec  7 08:02:01 x201i wpa_supplicant[667]: wlan0: Failed to initiate AP s=
can
>
> I do not know where the problem is?
> If necessary, I can tie debugging.
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org=
"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=P21DGeqrywEbcLmxB7MC9x8_dbFrwivhn-wmZfKyPXQ>