Date: Sat, 1 Mar 2014 18:16:05 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Milan Obuch <freebsd-mips@dino.sk> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: I (think) the AR8327 switch support now works Message-ID: <CAJ-Vmom6hpoBhuOfmLFZj_aC-v%2Bm4tZTetM_Kh9HO3%2B39_gPjQ@mail.gmail.com> In-Reply-To: <20140301200546.7ff373d1@zeta.dino.sk> References: <CAJ-Vmok0cVLnH9DQh%2Bz6XF-NQmPKy_Ez37kLtuCSRThwjQHTJQ@mail.gmail.com> <20140301143607.13a96bd6@zeta.dino.sk> <CAJ-Vmom2coTLFn0zcTa=BzxAOopMjCDUBOtQwOVOyQmCeB19wA@mail.gmail.com> <20140301200546.7ff373d1@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 1 March 2014 11:05, Milan Obuch <freebsd-mips@dino.sk> wrote: > On Sat, 1 Mar 2014 09:07:42 -0800 > Adrian Chadd <adrian@freebsd.org> wrote: > >> Yeah, USB still doesn't work. I don't know why that is. :( >> > > Well, I think some initialisation is not done - maybe multiplexed pin > setup is missing, maybe some gpio is used to activate something, > unfortunaltelly, no datasheet is available publicly for SoC used :( Yeah. I have the datasheets and the openwrt source is out there. I'll see if I can figure it out tonight. I'm still stalled on the AR8327 forwarding/learning stuff; I could do with a distraction. >> Are the flash IDs from Linux? I can commit those easily enough. >> >> Thanks, >> > > No, I disassembled my box and then found datasheets for ICs found on > PCB - that's where I found those IDs. Then I found it looks like > working, however I could not verify it yet, because I did not reached > init launch/userland level yet. > > With ethernet working, I would be able to do more (rootfs via nfs), > but this did not happen, yet. One thing at a time. :-) Thanks, -a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmom6hpoBhuOfmLFZj_aC-v%2Bm4tZTetM_Kh9HO3%2B39_gPjQ>