Date: Wed, 20 Jul 2011 22:18:15 -0700 From: Kevin Oberman <kob6558@gmail.com> To: Joe Marcus Clarke <marcus@freebsd.org> Cc: freebsd-gnome@freebsd.org Subject: Re: HAL issues Message-ID: <CAN6yY1srFGCysNj7D9Vg4xxmB9LGW3gEKfPQFUA7GmD-RavM=A@mail.gmail.com> In-Reply-To: <4E277870.8010506@freebsd.org> References: <CAN6yY1v%2BQSZfjsx11NO-ZC9pYPAgCGrxsJFfP_FGA-7qrWr%2Beg@mail.gmail.com> <4E25E739.2020301@freebsd.org> <CAN6yY1vm3_fviB1KzBAGZn=akXBD6rPeEGwpeu_8OS7V4cis7w@mail.gmail.com> <4E277870.8010506@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 20, 2011 at 5:53 PM, Joe Marcus Clarke <marcus@freebsd.org> wro= te: > On 7/19/11 5:22 PM, Kevin Oberman wrote: >> On Tue, Jul 19, 2011 at 1:21 PM, Joe Marcus Clarke <marcus@freebsd.org> = wrote: >>> On 7/19/11 3:32 PM, Kevin Oberman wrote: >>>> I know HAL is probably on its last legs, but it still frustrates me on >>>> a regular basis. >>>> >>>> As of the current ports (updated yesterday), it works pretty well, but >>>> I am having a couple >>>> of annoying issues. One is with a filesystem that hald does not see. >>>> >>>> First is a geli encrypted UFS system that hald simply does not see. >>>> When I connect the >>>> drive, I see devd reporting: >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dusb/0.4.0 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dugen0.4 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dusb/0.4.1 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dusb/0.4.2 >>>> +ugen0.4 at port=3D2 vendor=3D0x0bc2 product=3D0x2300 devclass=3D0x00 >>>> devsubclass=3D0x00 sernum=3D"2GH5KM5P =A0 =A0" release=3D0x0130 on uge= n0.2 >>>> !system=3DUSB subsystem=3DDEVICE type=3DATTACH ugen=3Dugen0.4 cdev=3Du= gen0.4 >>>> vendor=3D0x0bc2 product=3D0x2300 devclass=3D0x00 devsubclass=3D0x00 >>>> sernum=3D"2GH5KM5P =A0 =A0" release=3D0x0130 mode=3Dhost port=3D2 pare= nt=3Dugen0.2 >>>> !system=3DUSB subsystem=3DINTERFACE type=3DATTACH ugen=3Dugen0.4 cdev= =3Dugen0.4 >>>> vendor=3D0x0bc2 product=3D0x2300 devclass=3D0x00 devsubclass=3D0x00 >>>> sernum=3D"2GH5KM5P =A0 =A0" release=3D0x0130 mode=3Dhost interface=3D0= endpoints=3D2 >>>> intclass=3D0x08 intsubclass=3D0x06 intprotocol=3D0x50 >>>> +umass0 vendor=3D0x0bc2 product=3D0x2300 devclass=3D0x00 devsubclass= =3D0x00 >>>> sernum=3D"2GH5KM5P =A0 =A0" release=3D0x0130 mode=3Dhost intclass=3D0x= 08 >>>> intsubclass=3D0x06 intprotocol=3D0x50 =A0at bus=3D2 hubaddr=3D2 port= =3D0 devaddr=3D4 >>>> interface=3D0 vendor=3D0x0bc2 product=3D0x2300 devclass=3D0x00 >>>> devsubclass=3D0x00 sernum=3D"2GH5KM5P =A0 =A0" release=3D0x0130 mode= =3Dhost >>>> intclass=3D0x08 intsubclass=3D0x06 intprotocol=3D0x50 =A0on uhub3 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dpass2 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dda0 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dda0s1 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dda0s2 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dda0s3 >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dmsdosfs/MUSICBAC= KUP >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dmsdosfs/MUSIC2BC= KUP >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dda0s3.eli >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dda0s3.elid >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dufsid/4bdb229f7d= fac54e >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dufs/Auxbak >>>> >>>> Then I attach the geli encrypted slice and devd reports: >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dda0s3.elid >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dufsid/4bdb229f7d= fac54e >>>> !system=3DDEVFS subsystem=3DCDEV type=3DCREATE cdev=3Dufs/Auxbak >>>> but lshal only shows: >>>> udi =3D '/org/freedesktop/Hal/devices/volume_size_533779542016' >>>> =A0 block.device =3D '/dev/da0s3.eli' =A0(string) >>>> =A0 [...] >>>> with no 'd' partition and no ufs entry. As a result, it does not get >>>> mounted. I can mount it >>>> manually fine, so there is no FS issue, I've even triggered a >>>> re-taste, but it still is missing. >>>> >>>> I'm probably going to have to build hald with debug to track this >>>> down, but I thought I'd >>>> ask for any suggestions of what to look for or how best to debug it. >>> >>> You need to provide the additional information documented at >>> http://www.freebsd.org/gnome/docs/halfaq.html#q4 . >> >> Sorry, Joe. Only the hald verbose log really looks interesting. It's >> attached. It >> sees all of the devd CREATE events, but seems to do nothing with the >> /dev/da0s3.elid one, though it does check on the status of the other >> file systems. >> >> hald was started at 13:56. At 13:57:06 I plugged in the USB drive. At 13= :57:33 >> I attached the geli device (/dev/da0s3.eli). >> >> Here are the results of the other commands: >>> sysctl -b kern.geom.conftxt >> 0 DISK da0 750156374016 512 hd 255 sc 63 >> 1 PART da0s3 533779545600 512 i 3 o 216374215680 ty freebsd xs MBR xt 16= 5 >> 2 ELI da0s3.eli 533779542016 4096 >> 3 PART da0s3.elid 533779533824 4096 i 4 o 8192 ty !0 xs BSD xt 0 >> 4 LABEL ufs/Auxbak 533779533824 4096 i 0 o 0 >> 4 LABEL ufsid/4bdb229f7dfac54e 533779533824 4096 i 0 o 0 >> 1 PART da0s2 136358691840 512 i 2 o 80015523840 ty !12 xs MBR xt 12 >> 2 LABEL msdosfs/MUSIC2BCKUP 136358691840 512 i 0 o 0 >> 1 PART da0s1 80015491584 512 i 1 o 32256 ty !12 xs MBR xt 12 >> 2 LABEL msdosfs/MUSICBACKUP 80015491584 512 i 0 o 0 >> 0 DISK cd0 0 2048 hd 0 sc 0 >> 0 DISK ada0 320072933376 512 hd 1 sc 63 >> 1 PART ada0s4 16777216000 512 i 4 o 303294316544 ty ntfs xs MBR xt 7 >> 2 LABEL ntfs/Lenovo_Recovery 16777216000 512 i 0 o 0 >> 1 PART ada0s3 188743661056 512 i 3 o 114550636544 ty freebsd xs MBR xt 1= 65 >> 2 PART ada0s3f 177167400960 512 i 6 o 11136925696 ty freebsd-ufs xs BSD = xt 7 >> 3 LABEL ufs/usr 177167400960 512 i 0 o 0 >> 2 PART ada0s3e 536870912 512 i 5 o 10600054784 ty freebsd-ufs xs BSD xt = 7 >> 3 LABEL ufs/temp 536870912 512 i 0 o 0 >> 2 PART ada0s3d 5231345664 512 i 4 o 5368709120 ty freebsd-ufs xs BSD xt = 7 >> 3 LABEL ufs/var 5231345664 512 i 0 o 0 >> 2 PART ada0s3b 4294967296 512 i 2 o 1073741824 ty freebsd-swap xs BSD xt= 1 >> 3 LABEL label/swap 4294966784 512 i 0 o 0 >> 2 PART ada0s3a 1073741824 512 i 1 o 0 ty freebsd-ufs xs BSD xt 7 >> 3 LABEL ufs/root 1073741824 512 i 0 o 0 >> 1 PART ada0s2 113291296768 512 i 2 o 1259339776 ty ntfs xs MBR xt 7 >> 2 LABEL ntfs/Windows7_OS 113291296768 512 i 0 o 0 >> 1 PART ada0s1 1258291200 512 i 1 o 1048576 ty ntfs xs MBR xt 7 >> 2 LABEL ntfs/SYSTEM_DRV 1258291200 512 i 0 o 0 >> 0 MD md0 33927168 512 u 0 s 512 f 0 fs 0 l 33927168 t vnode file >> /usr/home/oberman/Desktop/Downloads/8auj09uc.iso >> 1 LABEL iso9660/8auj09us 33927168 512 i 0 o 0 >> rogue> cat /etc/fstab >> # Device =A0 =A0 =A0Mountpoint =A0 =A0 =A0 =A0 =A0 =A0 =A0FStype =A0Opti= ons =A0 =A0 =A0 =A0 Dump =A0 =A0Pass# >> /dev/label/swap =A0 =A0 =A0 none =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= swap =A0 =A0sw =A0 =A0 =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 0 >> /dev/ufs/root / =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 ufs =A0 =A0 = rw =A0 =A0 =A0 =A0 =A0 =A0 =A01 =A0 =A0 =A0 1 >> /dev/ufs/temp /tmp =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ufs =A0 =A0 rw= =A0 =A0 =A0 =A0 =A0 =A0 =A02 =A0 =A0 =A0 2 >> /dev/ufs/usr =A0/usr =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ufs =A0 =A0 = rw =A0 =A0 =A0 =A0 =A0 =A0 =A02 =A0 =A0 =A0 2 >> /dev/ufs/var =A0/var =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ufs =A0 =A0 = rw =A0 =A0 =A0 =A0 =A0 =A0 =A02 =A0 =A0 =A0 2 >> #/dev/ad4s2 =A0 /C =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ntfs =A0 = =A0ro =A0 =A0 =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 0 >> #/dev/acd0 =A0 =A0/cdrom =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0cd9660 =A0ro= ,noauto =A0 =A0 =A0 0 =A0 =A0 =A0 0 >> proc =A0 =A0 =A0 =A0 =A0/proc =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 procfs= =A0rw =A0 =A0 =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 0 >> fdescfs =A0 =A0 =A0 =A0 =A0 =A0 =A0 /dev/fd =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 fdescfs rw =A0 =A0 =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 0 >> linproc =A0 =A0 =A0 =A0 =A0 =A0 =A0 /compat/linux/proc =A0 =A0 =A0linpro= cfs rw =A0 =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 0 >> rogue> ck-list-sessions >> Session1: >> =A0 =A0 =A0 unix-user =3D '9381' >> =A0 =A0 =A0 realname =3D 'Kevin Oberman' >> =A0 =A0 =A0 seat =3D 'Seat2' >> =A0 =A0 =A0 session-type =3D '' >> =A0 =A0 =A0 active =3D FALSE >> =A0 =A0 =A0 x11-display =3D ':0' >> =A0 =A0 =A0 x11-display-device =3D '/dev/ttyv8' >> =A0 =A0 =A0 display-device =3D 'ttyv0' >> =A0 =A0 =A0 remote-host-name =3D '' >> =A0 =A0 =A0 is-local =3D FALSE >> =A0 =A0 =A0 on-since =3D '2011-07-18T23:17:23.124124Z' >> =A0 =A0 =A0 login-session-id =3D '' > > Give this patch a shot. > > http://www.marcuscom.com/downloads/patch-hald_freebsd_hf-storage.c Thanks, Joe. That did it. All three file systems now mount as they should. Please feel free to commit. I'm sure that others have hit this, too, althou= gh it is a rather odd case. --=20 R. Kevin Oberman, Network Engineer - Retired E-mail: kob6558@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN6yY1srFGCysNj7D9Vg4xxmB9LGW3gEKfPQFUA7GmD-RavM=A>