Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 22 Feb 2002 18:58:20 -0500
From:      "Jeff Lawton" <jeff@idealso.com>
To:        <freebsd-net@FreeBSD.ORG>
Subject:   RE: 3com gigabit 3c996b-t
Message-ID:  <NFBBJDLNADNIPCNOAPMHCEEPCDAA.jeff@idealso.com>
In-Reply-To: <20020222235251.A32972@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Bge detects the card and it shows up on ifconfig it does not detect
1000basetx on autoselect even though the card and the switch both register
1000baset. I connected it to a 100base t port and it seems to work fine. How
do I get it to switch to 1000baset

This is the bge section of ifconfig

bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3<rxcsum,txcsum>
        inet 192.168.0.166 netmask 0xffffff00 broadcast 192.168.0.255
        inet6 fe80::204:76ff:fee0:12a9%bge0 prefixlen 64 scopeid 0x1
        ether 00:04:76:e0:12:a9
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

Jeff
-----Original Message-----
From: owner-freebsd-net@FreeBSD.ORG [mailto:owner-freebsd-net@FreeBSD.ORG]On
Behalf Of Jesper Skriver
Sent: Friday, February 22, 2002 5:53 PM
To: Jeff Lawton
Cc: freebsd-net@FreeBSD.ORG
Subject: Re: FW: 3com gigabit 3c996b-t

On Fri, Feb 22, 2002 at 05:41:03PM -0500, Jeff Lawton wrote:

> I am having trouble getting a 3com 3c996b-t to installed correctly. Is
> here a reference on how to properly set up the bge(4) driver. I am
> useing 4.5 release

If you told what the problem was, it would be a whole lot easier to help
...

/Jesper

--
Jesper Skriver, jesper(at)skriver(dot)dk  -  CCIE #5456
Work:    Network manager   @ AS3292 (Tele Danmark DataNetworks)
Private: FreeBSD committer @ AS2109 (A much smaller network ;-)

One Unix to rule them all, One Resolver to find them,
One IP to bring them all and in the zone to bind them.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NFBBJDLNADNIPCNOAPMHCEEPCDAA.jeff>