Date: Wed, 13 Nov 1996 20:37:13 -0500 (EST) From: jamie <batsy@interlog.com> To: freebsd-questions@freebsd.org Subject: /dev/rodent Message-ID: <Pine.BSI.3.95.961113203542.5326A-100000@gold.interlog.com>
next in thread | raw e-mail | index | archive | help
If you have any ideas on what I have done wrong, please mention them. :)
I am running 960612-SNAP for reference.
This is the relevant part of lsdev relating to the mouse devices and seriel
ports. I have a dumb terminal on cuaa1 but nothing on cuaa0(sio0 I think)
, yet cuaa0 is still busy.
Device State Description
---------- --------------- --------------------------------------------------
sio0 Busy Serial port: National 16550A or compatible
sio1 Busy Serial port: National 16550A or compatible
mse0 Unconfigured ATI or Logitech bus mouse adapter
psm0 Idle PS/2 Mouse
This is what dmesg thinks that psm0 is.:
psm0 at 0x60-0x63 irq 12 on motherboard
Here is me cat'ing the device.
Script started on Wed Nov 13 14:49:53 1996
groovy: {1} su
Password:
groovy: {1} cat /dev/mouse
cat: /dev/mouse: Resource temporarily unavailable
And of course starting X. When I start xdm it comes up beautifully,
but the mouse sits there frozen on the screen.
groovy: {2} startx
XFree86 Version 3.1.2G / X Window System
(protocol Version 11, revision 0, vendor release 6100)
Release Date: Sep 3 1996
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: FreeBSD 2.1.5
Configured drivers:
Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
Using syscons driver with X support (version 2.0)
(using VT number 10)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc102"
(**) XKB: layout: "us"
(**) Mouse: type: Logitech, device: /dev/mouse, baudrate: 1200
(**) Mach64: Graphics device ID: "Primary Card"
(**) Mach64: Monitor ID: "Primary Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/f
onts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) Mach64: PCI: Mach64 CT rev 9, Aperture @ 0xf0000000, Sparse I/O @ 0x02ec
(--) Mach64: card type: PCI
(--) Mach64: Memory type: 1
(--) Mach64: Clock type: Internal
(--) Mach64: Maximum allowed dot-clock: 135.000 MHz
(**) Mach64: Mode "1280x1024": mode clock = 110.000
(**) Mach64: Mode "1024x768": mode clock = 85.000
(**) Mach64: Mode "800x600": mode clock = 50.000
(**) Mach64: Mode "640x480": mode clock = 31.500
(--) Mach64: Virtual resolution: 1280x1024
(--) Mach64: videoram: 2048k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 8 MB aperture @ 0xf0000000
(--) Mach64: Ramdac is Internal
(--) Mach64: Using 8 bits per RGB value
(--) Mach64: Pixmap cache: 1 256x256 slots, 2 128x128 slots, 8 64x64 slots
(--) Mach64: Font cache: 16 fonts
Warning: /dev/mouse unable to get status of mouse fd (Invalid argument)
access control disabled, clients can connect from any host
fvwm: not found
waiting for X server to shut down
groovy: {3}
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.95.961113203542.5326A-100000>