Date: Sun, 24 Sep 2000 10:23:49 +0200 From: "Kristian Hansen" <kristian.hansen@post.tele.dk> To: "Archibald Hive" <root@e-u-a.net> Cc: <hardware@freebsd.org> Subject: Re: Disk/Tape Controller Message-ID: <003301c02600$ea74ea00$0401a8c0@spellweaver.dk> References: <Pine.BSF.4.21.0009140744290.8681-100000@archive.e-u-a.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, This problem seems to date back to FreeBSD 3.1, see following link: http://www.freebsd.org/cgi/query-pr.cgi?pr=10563 I'm reproducing the problem on FreeBSD 4.0 using a Colorado QIC-40 drive, that I've previously used with FreeBSD 2.2.8. Regards Kristian Hansen, ----- Original Message ----- From: "Archibald Hive" <root@e-u-a.net> To: <hardware@freebsd.org> Cc: <questions@freebsd.org> Sent: 14. september 2000 13:44 Subject: Disk/Tape Controller > > > Hello, I've tried everything that I could find on the freebsd site about > floppy tape's. I guess this is my last ditch effort attempt to find out > if the conner model CTT800I-F QIC-80 (drive connects via fdd > connection) is in any way, shape or form accessible under fbsd. > > I've tried adding in the following lines to the kernels config, but no > luckage with it: > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 flags 0x1 vector fdintr > *and* > device ft0 at fdc0 drive 2 > > at which time i get the response back during the configuration of the > kernel i recieve: > > config: line 42: syntax error > config: line 43: fdc 0 not defined > config: line 44: fdc 0 not defined > config: line 45: fdc 0 not defined > > Warning: device "ft" is unknown > > at which time I then remodified the kernel to remove the quatations with > the same results. > > figure, okay, no problem, just keep marching on right... > > # make depend -- no problems > # make --------- appears to have no problems > # make install - does install just fine > > # shutdown -r now > > # cd /dev > # ./MAKEDEV ft0 > ft0 - no such device name > > # > > I'm wondering if there is a way to work around this, maybe using a scsi > fdd controller and build that into the kernel, do you think that would > work? > > At wit's end, appreciate the time and help > > root@e-u-a.net > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003301c02600$ea74ea00$0401a8c0>