Date: Sun, 30 Dec 2001 11:24:59 +0100 From: Nils Holland <nils@tisys.org> To: freebsd-multimedia@freebsd.org Subject: Problem with bktr-based TV card Message-ID: <20011230112459.A379@tisys.org>
next in thread | raw e-mail | index | archive | help
Hi folks, I just got my hands on a WinTV PCI-FM TV / Radio card, and I guess I have some problems with it. Basically, when using fxtv to watch TV, everything looks fine as long as I keep the fxtv windows small. However, once I make it bigger or hit the "full screen" button, the picture starts to look really distorted. I have made two screenshots that illustrate this: Small fxtv window, looks good: http://www.tisys.org/misc/fxtv_small.png Big fxtv window, looks weird: http://www.tisys.org/misc/fxtv_big.png Now, I wonder if this is normal or if there's something wrong with my system. As far as my graphics card is concerned, it's an ATI Xpert 98 card (XF86 driver "ati"), but swapping it for an ATI Xpert 2000 Pro (XF86 driver "r128") doesn't change a thing. I assume that it could probably a chipset problem, as my system is based on the VIA KT133 and the famous 686B. In order to help you have a look at this, I have attached my /var/run/dmesg.boot at the bottom of this message. I'd be glad about any hints about what could be wrong here. Greetings Nils Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-PRERELEASE #0: Sat Dec 29 12:14:04 CET 2001 root@poison.ncptiddische.net:/usr/obj/usr/src/sys/JODIE Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 996633567 Hz CPU: AMD Athlon(tm) processor (996.63-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 805240832 (786368K bytes) avail memory = 779374592 (761108K bytes) Preloaded elf kernel "kernel" at 0xc0366000. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00fdba0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <VIA 83C572 USB controller> at 7.2 irq 10 pci0: <VIA 83C572 USB controller> at 7.3 irq 10 chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0 pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 5 at device 7.5 on pci0 bktr0: <BrookTree 878> mem 0xdc001000-0xdc001fff irq 10 at device 16.0 on pci0 iicbb0: <I2C generic bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only smbus0: <System Management Bus> on bti2c0 bktr0: Hauppauge Model 44354 C221 bktr0: Detected a MSP3415D-B3 at 0x80 bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 16.1 irq 10 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe800-0xe81f irq 11 at device 17.0 on pci0 ed0: address 00:20:18:2f:42:2d, type NE2000 (16 bit) orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <HEWLETT-PACKARD DESKJET 930C> MLC,PCL,PML lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ad0: 57241MB <WDC WD600AB-32CZA0> [116301/16/63] at ata0-master UDMA100 acd0: CDROM <CD-ROM 52X/AKH> at ata1-master using PIO4 acd1: CD-RW <LITE-ON LTR-12101B> at ata1-slave using PIO4 Mounting root from ufs:/dev/ad0s1a -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011230112459.A379>