Date: Mon, 30 Jul 2001 18:21:24 +0200 From: Len Conrad <LConrad@Go2France.com> To: tokenring@FreeBSD.ORG Subject: canīt get olicom to go Message-ID: <5.1.0.14.0.20010730181526.057b2008@mail.Go2France.com>
next in thread | raw e-mail | index | archive | help
kernel config:
# Olicom device
pseudo-device token
device oltr
most of dmesg.boot:
FreeBSD 4.3-RELEASE #0: Mon Jul 30 21:47:59 CEST 2001
root@:/usr/src/sys/compile/GWTEST
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (701.59-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 117428224 (114676K bytes)
avail memory = 111288320 (108680K bytes)
Preloaded elf kernel "kernel" at 0xc02fc000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xe7800000-0xe7800fff
irq 12 at device 1.1 on pci0
sis0: Ethernet address: 00:e0:18:08:dd:99
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS model 6300 VGA-compatible display device> at 0.0 irq 11
ste0: <D-Link DFE-550TX 10/100BaseTX> port 0x9800-0x987f mem
0xe5000000-0xe50001ff irq 11 at device 13.0 on pci0
ste0: Ethernet address: 00:50:ba:f4:bb:06
miibus1: <MII bus> on ste0
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy2: <Generic IEEE 802.3u media interface> on miibus1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
oltr0: <Olicom PCI/II 16/4 Adapter (OC-3137)> port 0x9400-0x943f irq 10 at
device 14.0 on pci0
oltr0: MAC address 00:00:83:2a:b0:1f
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
--------------------------------
1. When we bring up the 3137 (or 3140), itīs always in PROMISC mode.
This didnīt occur on a 4.2R machine where we DL'ed the driver ourselves
(rather than use the kernel driver of 4.3R) and has been running 9 months
error free.
2. After about 10 minutes of pinging, the cards donīt answer any more.
Thanks,
Len
http://MenAndMice.com/DNS-training
http://BIND8NT.MEIway.com : ISC BIND 8.2.4 for NT4 & W2K
http://IMGate.MEIway.com : Build free, hi-perf, anti-abuse mail gateways
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-tokenring" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20010730181526.057b2008>