Date: Sat, 8 Dec 2007 22:17:02 -0500 From: "Lyle Scott III" <portcitycs@gmail.com> To: freebsd-embedded@freebsd.org Subject: Re: Can't boot NanoBSD on an Alix board Message-ID: <5a1835cd0712081917i17f55b5cy59b396cb1cd7f4da@mail.gmail.com> In-Reply-To: <5a1835cd0712072157p5c75c63bo81b2397dc4dadd13@mail.gmail.com> References: <5a1835cd0712072157p5c75c63bo81b2397dc4dadd13@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
ok, i just upgraded the BIOS and now it hands after choosing 1 for the bootloader: 640 KB Base Memory 261120 KB Extended Memory 01F0 Master 848A SanDisk SDCFB-512 Phys C/H/S 993/16/63 Log C/H/S 993/16/63 1 FreeBSD Default: 1 [FREEZE] On Dec 8, 2007 12:57 AM, Lyle Scott III <portcitycs@gmail.com> wrote: > Hey, i just got my Alix3c2 board in. I decided to go with NanoBSD for > this board, so i put nanobsd on my 512 flash and froze right after post. > This image loades great on a Soekris board (4511 and 4526) ,... it gives me > 2 options in the bootloader, i select 1 and it loads the nanobsd subset > great. > > I go to the alix board, and it freezes right after post: > > ----------------------- > 3PC Engines ALIX.3 v0.98oot. Press Ctrl-P for entering Monitor. > 640 KB Base Memory > 261120 KB Extended Memory > > 01F0 Master 848A SanDisk SDCFB-512 > Phys C/H/S 993/16/63 Log C/H/S 993/16/63 > [where it dies] > ------------------------ > > Any suggestions? I've tried using a full generic kernel, the TinyBSD > wireless kernel, and a trimmed down kernel i use for most of my embedded > stuff. you can only do so much in the Alix bios.... i'm not sure where to > go with this. Any help would be much appreciated > > > -- > > Lyle Scott, III > http://www.portcitycs.com > portcitycs@gmail.com |#| 910-231-0906 -- Lyle Scott, III http://www.lylescott.ws
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5a1835cd0712081917i17f55b5cy59b396cb1cd7f4da>