Date: Wed, 8 Aug 2007 17:11:15 -0400 From: Kris Kennaway <kris@obsecurity.org> To: perl@FreeBSD.org Subject: [ports-amd64@freebsd.org: p5-Thread-Pool-Simple-0.23 failed on amd64 5] Message-ID: <20070808211115.GC77042@rot26.obsecurity.org>
next in thread | raw e-mail | index | archive | help
--jy6Sn24JjFx/iggw Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable FYI; can you please investigate and/or report to the developers? If you are already aware of this problem but do not yet have a fix, please mark the port BROKEN in the appropriate case, so that users do not unexpectedly encounter it. See http://pointyhat.freebsd.org for the full log. Thanks, Kris ----- Forwarded message from User Ports-amd64 <ports-amd64@freebsd.org> ---= -- X-Original-To: kkenn@localhost Delivered-To: kkenn@localhost.obsecurity.org X-Original-To: kris@FreeBSD.org Delivered-To: kris@FreeBSD.org Date: Wed, 8 Aug 2007 17:15:47 GMT From: User Ports-amd64 <ports-amd64@freebsd.org> To: kris@FreeBSD.org, pav@FreeBSD.org Subject: p5-Thread-Pool-Simple-0.23 failed on amd64 5 X-UIDL: /c!#!%fd"!ADn"!2:Q!! building p5-Thread-Pool-Simple-0.23 on hammer2.isc.gumbysoft.com in directory /usr2/pkgbuild/5/chroot/3 building for: 5.5-STABLE amd64 maintained by: perl@FreeBSD.org port directory: /usr/ports/devel/p5-Thread-Pool-Simple build started at Wed Aug 8 17:14:59 UTC 2007 FETCH_DEPENDS=3D PATCH_DEPENDS=3Dperl-5.8.8.tbz EXTRACT_DEPENDS=3Dperl-5.8.8.tbz BUILD_DEPENDS=3Dperl-5.8.8.tbz RUN_DEPENDS=3Dperl-5.8.8.tbz prefixes: LOCALBASE=3Dusr/local X11BASE=3Dusr/local add_pkg =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 1: make = checksum>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D> Thread-Pool-Simple-0.23.tar.gz doesn't seem to exist in /tmp/distfiles= /. =3D> Attempting to fetch from ftp://freebsd.isc.org/pub/FreeBSD/ports/distf= iles/. Thread-Pool-Simple-0.23.tar.gz 4660 B 43 kBps =3D> MD5 Checksum OK for Thread-Pool-Simple-0.23.tar.gz. =3D> SHA256 Checksum OK for Thread-Pool-Simple-0.23.tar.gz. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 2: make = extract>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D add_pkg perl-5.8.8.tbz adding dependencies pkg_add perl-5.8.8.tbz Removing stale symlinks from /usr/bin... Skipping /usr/bin/perl Skipping /usr/bin/perl5 Done. Creating various symlinks in /usr/bin... Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl5 Done. Cleaning up /etc/make.conf... Done. Spamming /etc/make.conf... Done. Cleaning up /etc/manpath.config... Done. Spamming /etc/manpath.config... Done. =3D=3D=3D> Extracting for p5-Thread-Pool-Simple-0.23 =3D> MD5 Checksum OK for Thread-Pool-Simple-0.23.tar.gz. =3D> SHA256 Checksum OK for Thread-Pool-Simple-0.23.tar.gz. =3D=3D=3D> p5-Thread-Pool-Simple-0.23 depends on file: /usr/local/bin/per= l5.8.8 - found Deleting perl-5.8.8 Removing stale symlinks from /usr/bin... Removing /usr/bin/perl Removing /usr/bin/perl5 Done. Cleaning up /etc/make.conf... Done. Cleaning up /etc/manpath.config... Done. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 3: make = patch>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D add_pkg perl-5.8.8.tbz adding dependencies pkg_add perl-5.8.8.tbz Removing stale symlinks from /usr/bin... Skipping /usr/bin/perl Skipping /usr/bin/perl5 Done. Creating various symlinks in /usr/bin... Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl5 Done. Cleaning up /etc/make.conf... Done. Spamming /etc/make.conf... Done. Cleaning up /etc/manpath.config... Done. Spamming /etc/manpath.config... Done. =3D=3D=3D> Patching for p5-Thread-Pool-Simple-0.23 =3D=3D=3D> p5-Thread-Pool-Simple-0.23 depends on file: /usr/local/bin/per= l5.8.8 - found Deleting perl-5.8.8 Removing stale symlinks from /usr/bin... Removing /usr/bin/perl Removing /usr/bin/perl5 Done. Cleaning up /etc/make.conf... Done. Cleaning up /etc/manpath.config... Done. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 4: make = build>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D add_pkg perl-5.8.8.tbz adding dependencies pkg_add perl-5.8.8.tbz Removing stale symlinks from /usr/bin... Skipping /usr/bin/perl Skipping /usr/bin/perl5 Done. Creating various symlinks in /usr/bin... Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl5 Done. Cleaning up /etc/make.conf... Done. Spamming /etc/make.conf... Done. Cleaning up /etc/manpath.config... Done. Spamming /etc/manpath.config... Done. =3D=3D=3D> p5-Thread-Pool-Simple-0.23 depends on file: /usr/local/bin/per= l5.8.8 - found =3D=3D=3D> Configuring for p5-Thread-Pool-Simple-0.23 Checking if your kit is complete... Looks good Writing Makefile for Thread::Pool::Simple =3D=3D=3D> Building for p5-Thread-Pool-Simple-0.23 cp Simple.pm blib/lib/Thread/Pool/Simple.pm Manifying blib/man3/Thread::Pool::Simple.3 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 5: make = test>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D make: don't know how to make regression-test(continuing) =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 6: make = install>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D add_pkg perl-5.8.8.tbz adding dependencies pkg_add perl-5.8.8.tbz skipping perl-5.8.8, already added =3D=3D=3D> Installing for p5-Thread-Pool-Simple-0.23 =3D=3D=3D> p5-Thread-Pool-Simple-0.23 depends on file: /usr/local/bin/per= l5.8.8 - found =3D=3D=3D> Generating temporary packing list =3D=3D=3D> Checking if devel/p5-Thread-Pool-Simple already installed Manifying blib/man3/Thread::Pool::Simple.3 Installing /usr/local/lib/perl5/site_perl/5.8.8/Thread/Pool/Simple.pm Installing /usr/local/lib/perl5/5.8.8/man/man3/Thread::Pool::Simple.3 Writing /usr/local/lib/perl5/site_perl/5.8.8/mach/auto/Thread/Pool/Simple/.= packlist =3D=3D=3D> Compressing manual pages for p5-Thread-Pool-Simple-0.23 =3D=3D=3D> Registering installation for p5-Thread-Pool-Simple-0.23 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 7: make = package>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D> Building package for p5-Thread-Pool-Simple-0.23 Creating package /tmp/packages/All/p5-Thread-Pool-Simple-0.23.tbz Registering depends: perl-5.8.8. Creating bzip'd tar ball in '/tmp/packages/All/p5-Thread-Pool-Simple-0.23.t= bz' Deleting p5-Thread-Pool-Simple-0.23 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D Checking filesystem state list of extra files and directories in / (not present before this port was = installed but present after it was deinstalled) 88818 8 drwxr-xr-x 3 root wheel 512 = Aug 8 17:15 usr/local/lib/perl5/site_perl/5.8.8/mach/auto/Thread 88819 8 drwxr-xr-x 3 root wheel 512 = Aug 8 17:15 usr/local/lib/perl5/site_perl/5.8.8/mach/auto/Thread/Pool 88820 8 drwxr-xr-x 2 root wheel 512 = Aug 8 17:15 usr/local/lib/perl5/site_perl/5.8.8/mach/auto/Thread/Pool/Simp= le =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D build of /usr/ports/devel/p5-Thread-Pool-Simple ended at Wed Aug 8 17:15:4= 3 UTC 2007 ----- End forwarded message ----- --jy6Sn24JjFx/iggw Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQFGujFyWry0BWjoQKURAvVsAKCqL1L/pr1BTI2vxR3Htmj6kT/h3gCg1tZQ R5xs+hOMuwzxNktm0Viw6Rg= =XcXo -----END PGP SIGNATURE----- --jy6Sn24JjFx/iggw--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070808211115.GC77042>