Date: Sun, 6 Sep 2009 10:07:23 GMT From: dimitar vassilev <dimitar.vassilev@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/138571: LOR on 8.0-BETA3-AMD64 Message-ID: <200909061007.n86A7NxV098311@www.freebsd.org> Resent-Message-ID: <200909061010.n86AA2cN057245@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 138571
>Category: amd64
>Synopsis: LOR on 8.0-BETA3-AMD64
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Sep 06 10:10:02 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: dimitar vassilev
>Release: 8.0-BETA3
>Organization:
self
>Environment:
FreeBSD 8.0-BETA3 FreeBSD 8.0-BETA3 #0: Sat Aug 22 02:00:45 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
#
>Description:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA3 #0: Sat Aug 22 02:00:45 UTC 2009
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2193.17-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory = 3221225472 (3072 MB)
avail memory = 3091718144 (2948 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci4: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfeafd000-0xfeafdfff irq 19 at device 0.0 on pci4
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfeafe000-0xfeafefff irq 19 at device 0.1 on pci4
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xfd000000-0xfdffffff,0xfeaff000-0xfeafffff irq 18 at device 6.0 on pci4
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 1.0 on pci1
pci2: <PCI bus> on pcib4
arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable)
> mem 0xfc7ff000-0xfc7fffff,0xfbc00000-0xfbffffff irq 30 at device 14.0 on pci2
ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.46 2009-01-06
arcmsr0: [ITHREAD]
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2003> mem 0xfc8d0000-0xfc8dffff,0xfc8c0000-0xfc8cffff irq 29 at device 2.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:0c:76:14:38:89
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2003> mem 0xfc8f0000-0xfc8fffff,0xfc8e0000-0xfc8effff irq 30 at device 2.1 on pci1
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:0c:76:14:38:88
bge1: [ITHREAD]
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ACPI Warning: \\_SB_.PCI0.SBRG.FDC_._FDE: Return type mismatch - found Package, expected Buffer 20090521 nspredef-1051
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
device_attach: powernow1 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc9800-0xcafff,0xcb000-0xcc7ff,0xcc800-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <AMD> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
acd0: CDROM <CD-532E-A/3.0A> at ata0-master PIO4
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1120-VOL#00 R001> Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da0: Command Queueing enabled
da0: 286102MB (585937408 512 byte sectors: 255H 63S/T 36472C)
da1 at arcmsr0 bus 0 target 0 lun 1
da1: <Hitachi HDP725050GLA360 R001> Fixed Direct Access SCSI-5 device
da1: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da1: Command Queueing enabled
da1: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da2 at arcmsr0 bus 0 target 0 lun 2
da2: <Hitachi HDP725050GLA360 R001> Fixed Direct Access SCSI-5 device
da2: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da2: Command Queueing enabled
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da3 at arcmsr0 bus 0 target 0 lun 3
da3: <Hitachi HDP725050GLA360 R001> Fixed Direct Access SCSI-5 device
da3: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da3: Command Queueing enabled
da3: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/da0s1a
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xffffffff81222010, 0) error 19
bge0: link state changed to UP
bge1: link state changed to DOWN
bge0: link state changed to DOWN
bge0: link state changed to UP
lock order reversal:
1st 0xffffff803e7606c0 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2559
2nd 0xffffff00027bdc00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:285
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
_sx_xlock() at _sx_xlock+0x55
ufsdirhash_acquire() at ufsdirhash_acquire+0x33
ufsdirhash_newblk() at ufsdirhash_newblk+0x11
ufs_direnter() at ufs_direnter+0x1b1
ufs_makeinode() at ufs_makeinode+0x2a7
VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
vn_open_cred() at vn_open_cred+0x468
kern_openat() at kern_openat+0x179
syscall() at syscall+0x1af
Xfast_syscall() at Xfast_syscall+0xe1
--- syscall (5, FreeBSD ELF64, open), rip = 0x800c0cdfc, rsp = 0x7fffff1f9b38, rbp = 0x800d08900 ---
when i started to ftp and csup at the same time this error got into my dmesg.
Could you please check at your end also.
machine is alive after this - but it's a bit annoying
>How-To-Repeat:
try to copy to /root with sftp and csup at the same time.
HW is 3GB memory, areca 1120 and k8 master f mobo
>Fix:
if i knew i'd fix it.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909061007.n86A7NxV098311>