Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 25 Apr 2000 18:03:36 +0100
From:      Joey Garcia <gummibear@nettaxi.com>
To:        questions@freebsd.org, multimedia@freebsd.org
Subject:   EQ problem with XMMS - No Sound When Activated
Message-ID:  <3905CFE8.D956107F@nettaxi.com>

next in thread | raw e-mail | index | archive | help
Hey all!

This isn't one of those catastrophic problems that are sometimes
discussed on these mailinglists, but it's something that kinda irked me
about XMMS.  I love my music and it helps my day go by faster and
hopefully someone here will feel my pain.

Anyways, the problem that I have encountered is that when I activate the
EQ (equalizer) the sound pretty much shuts off.  Now I don't know if
this is due to my soundcard or maybe it's because of the way XMMS was
compiled.  Actually, I installed XMMS as a package off the cdrom that I
had created (or did I get it off the freebsd.org site?  I forgot). 
Anyways the point is that I didn't compile it myself; it was
precompiled.

I'm wondering if anyone else has run into this little annoyance.  Also,
I noticed that the playlist isn't visible at all.  How do I get it to
pop up?

Anyways, I should probably add my 'uname -a' and 'dmesg' info to give
you some idea of what kinda of hardware I have on this machine.  I would
appreciate any help.  Thanks!

DMESG OUTPUT: (Note: pcm0 line for audio device)

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #3: Mon Mar 27 18:26:57 GMT 2000
    root@bsd.brandx.net:/usr/src/sys/compile/MYBOX
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 134152192 (131008K bytes)
avail memory = 127266816 (124284K bytes)
Preloaded elf kernel "kernel" at 0xc02b9000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02b909c.
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0 irq 9
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe400-0xe40f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
pcib2: <PCI to PCI bridge (vendor=1106 device=3040)> at device 7.3 on
pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xe800-0xe83f mem
0xe8000000-0xe80fffff,0xe8100000-0xe8100fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:90:27:7b:eb:74
fxp0: supplying EUI64: 00:90:27:ff:fe:7b:eb:74
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
pcm0: <Yamaha OPL-SAx> at port
0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq
0,1 on isa0
unknown0: <OPL3-SAX Sound Board> at port 0x201 on isa0
ad0: 4120MB <Maxtor 84320D4> [8930/15/63] at ata0-master using UDMA33
acd0: CDROM <HITACHI CDR-7730> at ata0-slave using PIO2
Mounting root from ufs:/dev/ad0s1a
fxp0: starting DAD for fe80:0001::0290:27ff:fe7b:eb74
fxp0: DAD complete for fe80:0001::0290:27ff:fe7b:eb74 - no duplicates
found

UNAME -A OUTPUT:

FreeBSD bsd.intexcorp.com 4.0-RELEASE FreeBSD 4.0-RELEASE #3: Mon Mar 27
18:26:57 GMT 2000 


Again, Thanks for the help!!!

Joey Garcia


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3905CFE8.D956107F>