Date: Thu, 24 Jul 2003 00:02:39 -0700 From: John Reynolds <johnjen@reynoldsnet.org> To: current@freebsd.org Subject: questions on S-ATA and ICH5 (now owns hardware :) Message-ID: <16159.33935.258066.110462@whale.home-net>
next in thread | raw e-mail | index | archive | help
Hi all, a few weeks back I had asked whether -current supported ICH5's =
S-ATA
and S=F8ren stated that he'd put code in to detect it and it "should wo=
rk" but
there wasn't a lot of feedback yet from users. Well, I have some feedba=
ck. I
just got a new spiffy 120Gb Seagate S-ATA drive today and I can say tha=
t
-current (as of 7/22/2003) does at least see the drive plugged into the=
controller and I can build filesystems, copy/delete files to my heart's=
content. However, I'm not sure if everything is entirely correct. I'm a=
ttaching
a verbose dmesg (somewhat trimmed). The first thing I notice is that I =
see the
following bits:
atapci1: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0x=
cc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 9 at device 31.2 on =
pci0
...
ata2: at 0xc000 on atapci1
ad4: success setting UDMA133 on Intel ICH5 chip
ad4: <ST3120023AS/3.01> ATA-6 disk at ata2-master
ad4: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA133
ad4: piomode=3D12 dmamode=3D34 udmamode=3D70 cblid=3D1
Shouldn't this drive be found as a SATA150 device=3F
pciconf -lv shows both of the devices in ata-chipset.c
{ ATA=5FI82801EB, 0, 0, 0x00, ATA=5FUDMA5, "Intel ICH5" },
{ ATA=5FI82801EB=5F1, 0, 0, 0x00, ATA=5FSA150, "Intel ICH5" },
atapci0@pci0:31:1: class=3D0x01018a card=3D0x1022147b chip=3D0x24d=
b8086 rev=3D0x02=20
hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D mass storage
subclass =3D ATA
atapci1@pci0:31:2: class=3D0x01018f card=3D0x1022147b chip=3D0x24d=
18086 rev=3D0x02=20
hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D mass storage
subclass =3D ATA
The drive is plugged into the "SATA1" port on the MB (not "SATA2"). Doe=
s this
information help=3F What other information can I provide. Is there some=
thing
"wrong" here=3F
Thanks
-------------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
=09map[10]: type 3, range 32, base e8000000, size 27, enabled
found->=09vendor=3D0x8086, dev=3D0x2578, revid=3D0x02
=09bus=3D0, slot=3D0, func=3D0
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x8086, dev=3D0x2579, revid=3D0x02
=09bus=3D0, slot=3D1, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0=
ns)
IOAPIC #0 intpin 16 -> irq 2
Freeing (NOT implemented) redirected PCI irq 5.
=09map[20]: type 4, range 32, base 0000bc00, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x24d2, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D0
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D2
IOAPIC #0 intpin 19 -> irq 5
Freeing (NOT implemented) redirected PCI irq 10.
=09map[20]: type 4, range 32, base 0000b000, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x24d4, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D1
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D5
IOAPIC #0 intpin 18 -> irq 9
Freeing (NOT implemented) redirected PCI irq 11.
=09map[20]: type 4, range 32, base 0000b400, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x24d7, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D2
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dc, irq=3D9
Freeing (NOT implemented) redirected PCI irq 5.
=09map[20]: type 4, range 32, base 0000b800, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x24de, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D3
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D2
IOAPIC #0 intpin 23 -> irq 10
Freeing (NOT implemented) redirected PCI irq 11.
=09map[10]: type 1, range 32, base f6101000, size 10, enabled
found->=09vendor=3D0x8086, dev=3D0x24dd, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D7
=09class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dd, irq=3D10
=09powerspec 2 supports D0 D3 current D0
found->=09vendor=3D0x8086, dev=3D0x244e, revid=3D0xc2
=09bus=3D0, slot=3D30, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns=
)
found->=09vendor=3D0x8086, dev=3D0x24d0, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D0
=09class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
Freeing (NOT implemented) redirected PCI irq 0.
=09map[10]: type 4, range 32, base 00000000, size 3, enabled
=09map[14]: type 4, range 32, base 00000000, size 2, enabled
=09map[18]: type 4, range 32, base 00000000, size 3, enabled
=09map[1c]: type 4, range 32, base 00000000, size 2, enabled
=09map[20]: type 4, range 32, base 0000f000, size 4, enabled
found->=09vendor=3D0x8086, dev=3D0x24db, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D1
=09class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0288, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D9
Freeing (NOT implemented) redirected PCI irq 11.
=09map[10]: type 4, range 32, base 0000c000, size 3, enabled
=09map[14]: type 4, range 32, base 0000c400, size 2, enabled
=09map[18]: type 4, range 32, base 0000c800, size 3, enabled
=09map[1c]: type 4, range 32, base 0000cc00, size 2, enabled
=09map[20]: type 4, range 32, base 0000d000, size 4, enabled
found->=09vendor=3D0x8086, dev=3D0x24d1, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D2
=09class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x02a8, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D9
IOAPIC #0 intpin 17 -> irq 11
Freeing (NOT implemented) redirected PCI irq 9.
=09map[20]: type 4, range 32, base 00000500, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x24d3, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D3
=09class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D11
Freeing (NOT implemented) redirected PCI irq 9.
=09map[10]: type 4, range 32, base 0000d800, size 8, enabled
=09map[14]: type 4, range 32, base 0000dc00, size 6, enabled
=09map[18]: type 1, range 32, base f6102000, size 9, enabled
=09map[1c]: type 1, range 32, base f6103000, size 8, enabled
found->=09vendor=3D0x8086, dev=3D0x24d5, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D5
=09class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D11
=09powerspec 2 supports D0 D3 current D0
agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at de=
vice 0.0 on pci0
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf2000000-0xf3ffffff
pcib1: prefetched decode 0xf0000000-0xf1ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
Freeing (NOT implemented) redirected PCI irq 5.
=09map[10]: type 1, range 32, base f2000000, size 24, enabled
=09map[14]: type 3, range 32, base f0000000, size 25, enabled
found->=09vendor=3D0x10de, dev=3D0x002d, revid=3D0x15
=09bus=3D1, slot=3D0, func=3D0
=09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (25=
0 ns)
=09intpin=3Da, irq=3D2
=09powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f i=
rq 2 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f i=
rq 5 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f i=
rq 9 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f i=
rq 2 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xafff
pcib2: memory decode 0xf4000000-0xf5ffffff
pcib2: prefetched decode 0xf6000000-0xf60fffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=3D2
Freeing (NOT implemented) redirected PCI irq 11.
=09map[10]: type 1, range 32, base f5205000, size 11, enabled
=09map[14]: type 1, range 32, base f5200000, size 14, enabled
found->=09vendor=3D0x104c, dev=3D0x8024, revid=3D0x00
=09bus=3D2, slot=3D2, func=3D0
=09class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (100=
0 ns)
=09intpin=3Da, irq=3D9
=09powerspec 2 supports D0 D1 D2 D3 current D0
IOAPIC #0 intpin 20 -> irq 16
Freeing (NOT implemented) redirected PCI irq 10.
=09map[10]: type 3, range 32, base f6000000, size 12, enabled
=09map[14]: type 4, range 32, base 0000a000, size 5, enabled
=09map[18]: type 1, range 32, base f5000000, size 20, enabled
found->=09vendor=3D0x8086, dev=3D0x1229, revid=3D0x02
=09bus=3D2, slot=3D4, func=3D0
=09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14=
000 ns)
=09intpin=3Da, irq=3D16
IOAPIC #0 intpin 21 -> irq 17
Freeing (NOT implemented) redirected PCI irq 5.
=09map[10]: type 4, range 32, base 0000a400, size 2, enabled
=09map[14]: type 1, range 32, base f5204000, size 12, enabled
found->=09vendor=3D0x104b, dev=3D0x1040, revid=3D0x08
=09bus=3D2, slot=3D5, func=3D0
=09class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0000, cachelnsz=3D8 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x08 (20=
00 ns)
=09intpin=3Da, irq=3D17
Freeing (NOT implemented) redirected PCI irq 9.
=09map[10]: type 3, range 32, base f6001000, size 12, enabled
=09map[14]: type 4, range 32, base 0000a800, size 5, enabled
=09map[18]: type 1, range 32, base f5100000, size 20, enabled
found->=09vendor=3D0x8086, dev=3D0x1229, revid=3D0x02
=09bus=3D2, slot=3D9, func=3D0
=09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14=
000 ns)
=09intpin=3Da, irq=3D11
pci2: <serial bus, FireWire> at device 2.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xa000-0x=
a01f mem 0xf5000000-0xf50fffff,0xf6000000-0xf6000fff irq 16 at device 4=
.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xf6000000-0xf6000fff=
fxp0: using memory space register mapping
fxp0: Ethernet address 00:20:35:e7:ab:40
fxp0: PCI IDs: 8086 1229 1014 005c 0002
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x102ac0, model 0x000a, rev. 3
ukphy0: 100baseTX, 100baseTX-FDX, 100baseT4
fxp0: bpf attached
pcib2: device bt0 requested decoded I/O range 0xa400-0xa403
bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0xa400-0xa403 mem 0=
xf5204000-0xf5204fff irq 17 at device 5.0 on pci2
pcib2: device bt0 requested decoded I/O range 0xa400-0xa403
bt0: BT-948 FW Rev. 5.07B Ultra Narrow SCSI Host Adapter, SCSI ID 7, 19=
2 CCBs
bt0: Using Strict Round Robin Mailbox Mode
fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xa800-0x=
a81f mem 0xf5100000-0xf51fffff,0xf6001000-0xf6001fff irq 11 at device 9=
.0 on pci2
pcib2: device fxp1 requested decoded memory range 0xf6001000-0xf6001fff=
fxp1: using memory space register mapping
fxp1: Ethernet address 00:a0:c9:5a:a4:c7
fxp1: PCI IDs: 8086 1229 8086 0001 0002
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7=
,0-0x3,0-0x7 irq 9 at device 31.1 on pci0
ata0: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=3D03 stat0=3D50 stat1=3D00
ata0-master: ATA 01 a5
ata0: devices=3D01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: after reset mask=3D03 stat0=3D50 stat1=3D00
ata1-master: ATA 01 a5
ata1: devices=3D01
ata1: at 0x170 irq 15 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc=
03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 9 at device 31.2 on pc=
i0
ata2: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata2-slave: ATAPI 10 00
ata2-master: ATAPI 00 00
ata2: after reset mask=3D03 stat0=3D50 stat1=3D00
ata2-master: ATA 01 a5
ata2: devices=3D01
ata2: at 0xc000 on atapci1
ata3: pre reset mask=3D03 ostat0=3D7f ostat2=3D7f
ata3-master: ATAPI ff ff
ata3-slave: ATAPI ff ff
ata3: after reset mask=3D03 stat0=3D7f stat1=3D7f
ata3-master: ATA ff ff
ata3-slave: ATA ff ff
ata3: devices=3D00
ata3: at 0xc800 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xdc00-0xdc3f,0xd800-0xd8ff mem 0xf61=
03000-0xf61030ff,0xf6102000-0xf61021ff irq 11 at device 31.5 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec (id =3D 0x414c4720)>
pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realt=
ek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PC=
M, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4
pcm0: sndbuf=5Fsetmap 819000, 4000; 0xe8c30000 -> 819000
pcm0: sndbuf=5Fsetmap 821000, 4000; 0xe8c34000 -> 821000
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f=
7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x841 0x851 0x841 0x841
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
sio1: irq maps: 0x841 0x849 0x841 0x841
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
bt: bt0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read=5FPort at 203
Trying Read=5FPort at 243
Trying Read=5FPort at 283
Trying Read=5FPort at 2c3
Trying Read=5FPort at 303
Trying Read=5FPort at 343
Trying Read=5FPort at 383
Trying Read=5FPort at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa=5Fprobe=5Fchildren: disabling PnP devices
isa=5Fprobe=5Fchildren: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcc000-0xcc7ff,0xc0000-0xc8fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on is=
a0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vt0: not probed (disabled)
isa=5Fprobe=5Fchildren: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 5, 6, 7, 11, 12, 14, 15, 16, 17, apic=5F=
imen: 0xfffc2701
Device configuration finished.
procfs registered
APIC=5FIO: Testing 8254 interrupt delivery
APIC=5FIO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, defau=
lt to deny, logging disabled
lo0: bpf attached
acpi=5Fcpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.=
0%
ad0: success setting UDMA100 on Intel ICH5 chip
ad0: <MDT MD400BB-75CAA0/16.06V16> ATA-5 disk at ata0-master
ad0: 38146MB (78125000 sectors), 77504 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=3D12 dmamode=3D34 udmamode=3D69 cblid=3D1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad2: success setting UDMA66 on Intel ICH5 chip
ad2: <Maxtor 51024U2/DA620CQ0> ATA-5 disk at ata1-master
ad2: 9765MB (19999728 sectors), 19841 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA66
ad2: piomode=3D12 dmamode=3D34 udmamode=3D68 cblid=3D1
ar: FreeBSD check1 failed
ad4: success setting UDMA133 on Intel ICH5 chip
ad4: <ST3120023AS/3.01> ATA-6 disk at ata2-master
ad4: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA133
ad4: piomode=3D12 dmamode=3D34 udmamode=3D70 cblid=3D1
ar: FreeBSD check1 failed
Waiting 4 seconds for SCSI devices to settle
bt0: Using Strict Round Robin Mailbox Mode
pcm0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78124032
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 39999504384 end 39999536639
GEOM: new disk ad2
GEOM: new disk ad4
GEOM: Configure ad0s1a, start 0 length 125829120 end 125829119
GEOM: Configure ad0s1b, start 251658240 length 3221225472 end 347288371=
1
GEOM: Configure ad0s1c, start 0 length 39999504384 end 39999504383
GEOM: Configure ad0s1d, start 125829120 length 125829120 end 251658239
GEOM: Configure ad0s1e, start 3472883712 length 2147483648 end 56203673=
59
GEOM: Configure ad0s1f, start 5620367360 length 1073741824 end 66941091=
83
GEOM: Configure ad0s1g, start 6694109184 length 17179869184 end 2387397=
8367
GEOM: Configure ad0s1h, start 23873978368 length 16125526016 end 399995=
04383
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:19999665
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 10239828480 end 10239860735
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 120031478784 end 120031511039=
GEOM: Configure ad2s1c, start 0 length 10239828480 end 10239828479
GEOM: Configure ad2s1d, start 0 length 10239828480 end 10239828479
GEOM: Configure ad4s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad4s1d, start 0 length 120031478784 end 120031478783
bt: ccb 0xe8be8380 - error 4 occured. btstat =3D 11, sdstat =3D 0
bt: ccb 0xe8be8340 - error 4 occured. btstat =3D 11, sdstat =3D 0
bt: ccb 0xe8be8300 - error 4 occured. btstat =3D 11, sdstat =3D 0
bt: ccb 0xe8be8200 - error 4 occured. btstat =3D 11, sdstat =3D 0
bt: ccb 0xe8be8280 - error 4 occured. btstat =3D 11, sdstat =3D 0
bt: ccb 0xe8be82c0 - error 4 occured. btstat =3D 0, sdstat =3D 2
(probe3:bt0:0:3:0): error 22
(probe3:bt0:0:3:0): Unretryable Error
bt: ccb 0xe8be8240 - error 4 occured. btstat =3D 0, sdstat =3D 2
bt: ccb 0xe8be82c0 - error 4 occured. btstat =3D 0, sdstat =3D 2
(probe5:bt0:0:5:0): Retrying Command
pass0 at bt0 bus 0 target 3 lun 0
pass0: <YAMAHA CRW8824S 1.00> Removable CD-ROM SCSI-2 device=20
pass0: 20.000MB/s transfers (20.000MHz, offset 15)
pass1 at bt0 bus 0 target 5 lun 0
pass1: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device=20
pass1: Serial Number JKA217920D5CS8
pass1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Ena=
bled
da0 at bt0 bus 0 target 5 lun 0
da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device=20
da0: Serial Number JKA217920D5CS8
bt: ccb 0xe8be8240 - error 4 occured. btstat =3D 0, sdstat =3D 2
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabl=
ed
da0: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
(cd0:bt0:0:3:0): error 6
(cd0:bt0:0:3:0): Unretryable Error
cd0 at bt0 bus 0 target 3 lun 0
cd0: <YAMAHA CRW8824S 1.00> Removable CD-ROM SCSI-2 device=20
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present=
- tray closed
GEOM: new disk da0
SMP: AP CPU #1 Launched!
SMP: CPU1 ap=5Finit():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001f=
f
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):552/254/63 s:63 l:8883882
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 4548547584 end 4548579839
GEOM: Configure da0s1c, start 0 length 4548547584 end 4548547583
GEOM: Configure da0s1e, start 0 length 4548547584 end 4548547583
Mounting root from ufs:/dev/ad0s1a
start=5Finit: trying /sbin/init
--=20
John & Jennifer Reynolds johnjen at reynoldsnet.org www.reynold=
snet.org
Sr. Physical Design Engineer - WCCG/CCE PDE jreynold at sedona.ch.i=
ntel.com
Running FreeBSD since 2.1.5-RELEASE. FreeBSD: The Power t=
o Serve!
"Unix is user friendly, it's just particular about the friends it choos=
es."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?16159.33935.258066.110462>