Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 18 Feb 2009 21:00:05 GMT
From:      dirk.meyer@dinoex.sub.org (Dirk Meyer)
To:        freebsd-multimedia@FreeBSD.org
Subject:   Re: kern/131785: [snd_hda] [panic] sysctl hw.snd.maxautovchans panics with snd_hda
Message-ID:  <200902182100.n1IL05F2072162@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/131785; it has been noted by GNATS.

From: dirk.meyer@dinoex.sub.org (Dirk Meyer)
To: bug-followup@FreeBSD.org, mav@FreeBSD.org
Cc:  
Subject: Re: kern/131785: [snd_hda] [panic] sysctl hw.snd.maxautovchans
	panics with snd_hda
Date: Wed, 18 Feb 2009 21:23:11 +0100

 Sorry for the invalid email, fixed.
 
 Here the boot -v
 
 kind regards Dirk
 
 - Dirk Meyer, Im Grund 4, 34317 Habichtswald, Germany
 - [dirk.meyer@dinoex.sub.org],[dirk.meyer@guug.de],[dinoex@FreeBSD.org]
 http://people.freebsd.org/~dinoex/errorlogs/
 
 
 Copyright (c) 1992-2009 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 8.0-CURRENT #5: Tue Feb 17 06:39:57 CET 2009
     root@book64.dinoex.sub.de:/usr/obj/usr/src/sys/GENERIC
 WARNING: WITNESS option enabled, expect reduced performance.
 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f87000.
 Preloaded elf obj module "/boot/kernel/acpi_ibm.ko" at 0xffffffff80f87328.
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Calibrating TSC clock ... TSC clock: 1995013728 Hz
 CPU: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz (1995.01-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant
   Cores per package: 2
 usable memory = 1016954880 (969 MB)
 Physical memory chunk(s):
 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
 0x0000000000fb4000 - 0x000000003bb72fff, 985395200 bytes (240575 pages)
 0x000000003d6b9000 - 0x000000003d7b1fff, 1019904 bytes (249 pages)
 0x000000003d80f000 - 0x000000003d906fff, 1015808 bytes (248 pages)
 0x000000003db0f000 - 0x000000003db17fff, 36864 bytes (9 pages)
 0x000000003db1f000 - 0x000000003db52fff, 212992 bytes (52 pages)
 avail memory  = 979968000 (934 MB)
 ACPI APIC Table: <PTLTD  	 APIC  >
 INTR: Adding local APIC 1 as a target
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 APIC: CPU 0 has ACPI ID 0
 APIC: CPU 1 has ACPI ID 1
 ULE: setup cpu 0
 ULE: setup cpu 1
 ACPI: RSDP @ 0x0xf7190/0x0024 (v  2 LENOVO)
 ACPI: XSDT @ 0x0x3dbf624e/0x006C (v  1 LENOVO TP-6G    0x00000000  LTP 0x00000000)
 ACPI: FACP @ 0x0x3dbe8000/0x00F4 (v  3 LENOVO TP-6G    0x00000001 ALAN 0x00000001)
 ACPI: DSDT @ 0x0x3dbe9000/0x693C (v  2 LENOVO TP-6G    0x00000001 INTL 0x20050624)
 ACPI: FACS @ 0x0x3db9efc0/0x0040
 ACPI: HPET @ 0x0x3dbfcd86/0x0038 (v  1 LENOVO TP-6G    0x00000001 LOHR 0x0000005A)
 ACPI: MCFG @ 0x0x3dbfcdbe/0x003C (v  1 LENOVO TP-6G    0x00000001 LOHR 0x0000005A)
 ACPI: SLIC @ 0x0x3dbfcdfa/0x0176 (v  1 LENOVO TP-6G    0x00000001 TBD  0x00000001)
 ACPI: APIC @ 0x0x3dbfcf70/0x0068 (v  1 PTLTD  	 APIC   0x00000000  LTP 0x00000000)
 ACPI: BOOT @ 0x0x3dbfcfd8/0x0028 (v  1 PTLTD  $SBFTBL$ 0x00000000  LTP 0x00000001)
 ACPI: SSDT @ 0x0x3dbe7000/0x0655 (v  1  PmRef    CpuPm 0x00003000 INTL 0x20050624)
 ACPI: SSDT @ 0x0x3dbe6000/0x0259 (v  1  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624)
 ACPI: SSDT @ 0x0x3dbe5000/0x020F (v  1  PmRef    ApTst 0x00003000 INTL 0x20050624)
 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
 ioapic0: Routing external 8259A's -> intpin 0
 lapic0: Routing NMI -> LINT1
 lapic0: LINT1 trigger: edge
 lapic0: LINT1 polarity: high
 lapic1: Routing NMI -> LINT1
 lapic1: LINT1 trigger: edge
 lapic1: LINT1 polarity: high
 MADT: Interrupt override: source 0, irq 2
 ioapic0: Routing IRQ 0 -> intpin 2
 MADT: Interrupt override: source 9, irq 9
 ioapic0: intpin 9 trigger: level
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 cpu0 BSP:
      ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
 wlan: <802.11 Link Layer>
 null: <null device, zero device>
 random: <entropy source, Software, Yarrow>
 nfslock: pseudo-device
 kbd: new array size 4
 kbd1 at kbdmux0
 mem: <memory>
 io: <I/O>
 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 17 2009 06:39:49)
 acpi0: <LENOVO TP-6G> on motherboard
 ACPI: Overriding _OS definition with "Windows 2006"
 PCIe: Memory Mapped configuration base @ 0xe0000000
 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
 acpi0: [MPSAFE]
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0
 AcpiOsDerivePciId: \\_SB_.PCI0.RP01.J380.PCFG -> bus 2 dev 0 func 0
 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0
 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC1 -> bus 0 dev 31 func 0
 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
 Timecounter "HPET" frequency 14318180 Hz quality 900
 ACPI timer: 0/3 1/2 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 1
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
 pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    5   N     0  1 3 4 5 6 7 10 12 14 15
   Validation          0    5   N     0  1 3 4 5 6 7 10 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
 pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
   Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
 pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    3   N     0  1 3 4 5 6 7 10 12 14 15
   Validation          0    3   N     0  1 3 4 5 6 7 10 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
 pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
   Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
 pci_link4:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    7   N     0  1 3 4 5 6 7 10 12 14 15
   Validation          0    7   N     0  1 3 4 5 6 7 10 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
 pci_link5:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
   Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
 pci_link6:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
   Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
 pci_link7:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    4   N     0  1 3 4 5 6 7 11 12 14 15
   Validation          0    4   N     0  1 3 4 5 6 7 11 12 14 15
   After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
 acpi_lid0: <Control Method Lid Switch> on acpi0
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pci0: domain=0, physical bus=0
 found->	vendor=0x8086, dev=0x2a40, revid=0x07
 	domain=0, bus=0, slot=0, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x2a42, revid=0x07
 	domain=0, bus=0, slot=2, func=0
 	class=03-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=5
 	powerspec 3  supports D0 D3  current D0
 	MSI supports 1 message
 	map[10]: type Memory, range 64, base 0xf4000000, size 22, enabled
 	map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
 	map[20]: type I/O Port, range 32, base 0x1800, size  3, enabled
 pcib0: matched entry for 0.2.INTA
 pcib0: slot 2 INTA hardwired to IRQ 16
 found->	vendor=0x8086, dev=0x2a43, revid=0x07
 	domain=0, bus=0, slot=2, func=1
 	class=03-80-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	powerspec 3  supports D0 D3  current D0
 	map[10]: type Memory, range 64, base 0xf4400000, size 20, enabled
 found->	vendor=0x8086, dev=0x2937, revid=0x03
 	domain=0, bus=0, slot=26, func=0
 	class=0c-03-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0005, statreg=0x0298, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=5
 	map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
 pcib0: matched entry for 0.26.INTA
 pcib0: slot 26 INTA hardwired to IRQ 16
 found->	vendor=0x8086, dev=0x2938, revid=0x03
 	domain=0, bus=0, slot=26, func=1
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=11
 	map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
 pcib0: matched entry for 0.26.INTB
 pcib0: slot 26 INTB hardwired to IRQ 21
 found->	vendor=0x8086, dev=0x2939, revid=0x03
 	domain=0, bus=0, slot=26, func=2
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=7
 	map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
 pcib0: matched entry for 0.26.INTC
 pcib0: slot 26 INTC hardwired to IRQ 20
 found->	vendor=0x8086, dev=0x293c, revid=0x03
 	domain=0, bus=0, slot=26, func=7
 	class=0c-03-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=7
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type Memory, range 32, base 0xf4a04800, size 10, enabled
 pcib0: matched entry for 0.26.INTC
 pcib0: slot 26 INTC hardwired to IRQ 20
 found->	vendor=0x8086, dev=0x293e, revid=0x03
 	domain=0, bus=0, slot=27, func=0
 	class=04-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=10
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type Memory, range 64, base 0xf4a00000, size 14, enabled
 pcib0: matched entry for 0.27.INTA
 pcib0: slot 27 INTA hardwired to IRQ 22
 found->	vendor=0x8086, dev=0x2940, revid=0x03
 	domain=0, bus=0, slot=28, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message
 pcib0: matched entry for 0.28.INTA
 pcib0: slot 28 INTA hardwired to IRQ 17
 found->	vendor=0x8086, dev=0x2942, revid=0x03
 	domain=0, bus=0, slot=28, func=1
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=5
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message
 pcib0: matched entry for 0.28.INTB
 pcib0: slot 28 INTB hardwired to IRQ 16
 found->	vendor=0x8086, dev=0x2944, revid=0x03
 	domain=0, bus=0, slot=28, func=2
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=3
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message
 pcib0: matched entry for 0.28.INTC
 pcib0: slot 28 INTC hardwired to IRQ 18
 found->	vendor=0x8086, dev=0x2946, revid=0x03
 	domain=0, bus=0, slot=28, func=3
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 	intpin=d, irq=10
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message
 pcib0: matched entry for 0.28.INTD
 pcib0: slot 28 INTD hardwired to IRQ 19
 found->	vendor=0x8086, dev=0x294a, revid=0x03
 	domain=0, bus=0, slot=28, func=5
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=5
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message
 pcib0: matched entry for 0.28.INTB
 pcib0: slot 28 INTB hardwired to IRQ 16
 found->	vendor=0x8086, dev=0x2934, revid=0x03
 	domain=0, bus=0, slot=29, func=0
 	class=0c-03-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=4
 	map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
 pcib0: matched entry for 0.29.INTA
 pcib0: slot 29 INTA hardwired to IRQ 23
 found->	vendor=0x8086, dev=0x2935, revid=0x03
 	domain=0, bus=0, slot=29, func=1
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=10
 	map[20]: type I/O Port, range 32, base 0x18a0, size  5, enabled
 pcib0: matched entry for 0.29.INTB
 pcib0: slot 29 INTB hardwired to IRQ 19
 found->	vendor=0x8086, dev=0x2936, revid=0x03
 	domain=0, bus=0, slot=29, func=2
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=3
 	map[20]: type I/O Port, range 32, base 0x18c0, size  5, enabled
 pcib0: matched entry for 0.29.INTC
 pcib0: slot 29 INTC hardwired to IRQ 18
 found->	vendor=0x8086, dev=0x293a, revid=0x03
 	domain=0, bus=0, slot=29, func=7
 	class=0c-03-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=4
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type Memory, range 32, base 0xf4a04c00, size 10, enabled
 pcib0: matched entry for 0.29.INTA
 pcib0: slot 29 INTA hardwired to IRQ 23
 found->	vendor=0x8086, dev=0x2448, revid=0x93
 	domain=0, bus=0, slot=30, func=0
 	class=06-04-01, hdrtype=0x01, mfdev=0
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x2919, revid=0x03
 	domain=0, bus=0, slot=31, func=0
 	class=06-01-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x2929, revid=0x03
 	domain=0, bus=0, slot=31, func=2
 	class=01-06-01, hdrtype=0x00, mfdev=0
 	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=10
 	powerspec 3  supports D0 D3  current D0
 	MSI supports 16 messages
 	map[10]: type I/O Port, range 32, base 0x1818, size  3, enabled
 	map[14]: type I/O Port, range 32, base 0x180c, size  2, enabled
 	map[18]: type I/O Port, range 32, base 0x1810, size  3, enabled
 	map[1c]: type I/O Port, range 32, base 0x1808, size  2, enabled
 	map[20]: type I/O Port, range 32, base 0x18e0, size  5, enabled
 	map[24]: type Memory, range 32, base 0xf4a04000, size 11, enabled
 pcib0: matched entry for 0.31.INTB
 pcib0: slot 31 INTB hardwired to IRQ 19
 found->	vendor=0x8086, dev=0x2930, revid=0x03
 	domain=0, bus=0, slot=31, func=3
 	class=0c-05-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=10
 	map[10]: type Memory, range 64, base 0, size  8, enabled
 	map[20]: type I/O Port, range 32, base 0x1c00, size  5, enabled
 pcib0: matched entry for 0.31.INTC
 pcib0: slot 31 INTC hardwired to IRQ 19
 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
 agp0: <Intel GM45 SVGA controller> on vgapci0
 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
 vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xf4000000
 agp0: detected 32764k stolen memory
 agp0: aperture size is 256M
 vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device 2.1 on pci0
 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
 uhci0: [MPSAFE]
 uhci0: [ITHREAD]
 uhci0: LegSup = 0x3000
 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0
 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
 uhci1: [MPSAFE]
 uhci1: [ITHREAD]
 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.2 on pci0
 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51
 uhci2: [MPSAFE]
 uhci2: [ITHREAD]
 usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04800-0xf4a04bff irq 20 at device 26.7 on pci0
 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4a04800
 ehci0: [MPSAFE]
 ehci0: [ITHREAD]
 usbus3: EHCI version 1.0
 usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
 pci0: <multimedia, HDA> at device 27.0 (no driver attached)
 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 pcib1:   domain            0
 pcib1:   secondary bus     2
 pcib1:   subordinate bus   2
 pcib1:   I/O decode        0xf000-0xfff
 pcib1:   memory decode     0xf4500000-0xf45fffff
 pcib1:   no prefetched decode
 pci2: <ACPI PCI bus> on pcib1
 pci2: domain=0, physical bus=2
 found->	vendor=0x197b, dev=0x2382, revid=0x00
 	domain=0, bus=2, slot=0, func=0
 	class=08-80-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=5
 	powerspec 3  supports D0 D3  current D0
 	MSI supports 1 message
 	map[10]: type Memory, range 32, base 0xf4500000, size  8, enabled
 pcib1: requested memory range 0xf4500000-0xf45000ff: good
 pcib1: matched entry for 2.0.INTA
 pcib1: slot 0 INTA hardwired to IRQ 16
 found->	vendor=0x197b, dev=0x2381, revid=0x00
 	domain=0, bus=2, slot=0, func=2
 	class=08-05-01, hdrtype=0x00, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=5
 	powerspec 3  supports D0 D3  current D0
 	MSI supports 1 message
 	map[10]: type Memory, range 32, base 0xf4500400, size  8, enabled
 pcib1: requested memory range 0xf4500400-0xf45004ff: good
 pcib1: matched entry for 2.0.INTA
 pcib1: slot 0 INTA hardwired to IRQ 16
 found->	vendor=0x197b, dev=0x2383, revid=0x00
 	domain=0, bus=2, slot=0, func=3
 	class=08-80-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=5
 	powerspec 3  supports D0 D3  current D0
 	MSI supports 1 message
 	map[10]: type Memory, range 32, base 0xf4500800, size  8, enabled
 pcib1: requested memory range 0xf4500800-0xf45008ff: good
 pcib1: matched entry for 2.0.INTA
 pcib1: slot 0 INTA hardwired to IRQ 16
 pci2: <base peripheral> at device 0.0 (no driver attached)
 pci2: <base peripheral, SD host controller> at device 0.2 (no driver attached)
 pci2: <base peripheral> at device 0.3 (no driver attached)
 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
 pcib2:   domain            0
 pcib2:   secondary bus     3
 pcib2:   subordinate bus   3
 pcib2:   I/O decode        0xf000-0xfff
 pcib2:   no prefetched decode
 pci3: <ACPI PCI bus> on pcib2
 pci3: domain=0, physical bus=3
 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
 pcib3:   domain            0
 pcib3:   secondary bus     4
 pcib3:   subordinate bus   4
 pcib3:   I/O decode        0xf000-0xfff
 pcib3:   memory decode     0xf4700000-0xf47fffff
 pcib3:   no prefetched decode
 pci4: <ACPI PCI bus> on pcib3
 pci4: domain=0, physical bus=4
 found->	vendor=0x8086, dev=0x4237, revid=0x00
 	domain=0, bus=4, slot=0, func=0
 	class=02-80-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=3
 	powerspec 3  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type Memory, range 64, base 0xf4700000, size 13, enabled
 pcib3: requested memory range 0xf4700000-0xf4701fff: good
 pcib3: matched entry for 4.0.INTA
 pcib3: slot 0 INTA hardwired to IRQ 18
 pci4: <network> at device 0.0 (no driver attached)
 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
 pcib4:   domain            0
 pcib4:   secondary bus     5
 pcib4:   subordinate bus   6
 pcib4:   I/O decode        0x2000-0x2fff
 pcib4:   memory decode     0xf0000000-0xf3ffffff
 pcib4:   prefetched decode 0xf6000000-0xf7ffffff
 pci5: <ACPI PCI bus> on pcib4
 pci5: domain=0, physical bus=5
 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
 pcib5:   domain            0
 pcib5:   secondary bus     7
 pcib5:   subordinate bus   7
 pcib5:   I/O decode        0xf000-0xfff
 pcib5:   memory decode     0xf4600000-0xf46fffff
 pcib5:   no prefetched decode
 pci7: <ACPI PCI bus> on pcib5
 pci7: domain=0, physical bus=7
 found->	vendor=0x14e4, dev=0x1713, revid=0x02
 	domain=0, bus=7, slot=0, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 3  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type Memory, range 64, base 0xf4600000, size 16, enabled
 pcib5: requested memory range 0xf4600000-0xf460ffff: good
 pcib5: matched entry for 7.0.INTA
 pcib5: slot 0 INTA hardwired to IRQ 17
 bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf4600000-0xf460ffff irq 17 at device 0.0 on pci7
 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf4600000
 bge0: attempting to allocate 1 MSI vectors (1 supported)
 bge0: using IRQ 256 for MSI
 miibus0: <MII bus> on bge0
 brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
 brgphy0: OUI 0x000af7, model 0x0004, rev. 0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 bge0: bpf attached
 bge0: Ethernet address: 00:1e:ec:9c:88:87
 msi: Assigning MSI IRQ 256 to local APIC 0 vector 52
 bge0: [MPSAFE]
 bge0: [ITHREAD]
 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0
 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
 uhci3: [MPSAFE]
 uhci3: [ITHREAD]
 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.1 on pci0
 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
 uhci4: [MPSAFE]
 uhci4: [ITHREAD]
 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0
 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0
 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 55
 uhci5: [MPSAFE]
 uhci5: [ITHREAD]
 usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04c00-0xf4a04fff irq 23 at device 29.7 on pci0
 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4a04c00
 ehci1: [MPSAFE]
 ehci1: [ITHREAD]
 usbus7: EHCI version 1.0
 usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pcib6:   domain            0
 pcib6:   secondary bus     8
 pcib6:   subordinate bus   8
 pcib6:   I/O decode        0xf000-0xfff
 pcib6:   no prefetched decode
 pcib6:   Subtractively decoded bridge.
 pci8: <ACPI PCI bus> on pcib6
 pci8: domain=0, physical bus=8
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel (ID=29298086) AHCI controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf4a04000-0xf4a047ff irq 19 at device 31.2 on pci0
 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18e0
 atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf4a04000
 atapci0: [MPSAFE]
 atapci0: [ITHREAD]
 atapci0: AHCI Version 01.20 controller with 4 ports PM not supported
 ata2: <ATA channel 0> on atapci0
 ata2: SATA connect time=10ms
 ata2: ready wait time=5ms
 ata2: ahci_issue_cmd time=100ms cnt=0ms status=00000000
 ata2: ahci_issue_cmd time=0ms cnt=0ms status=00000000
 ata2: ready wait time=9ms
 ata2: SIGNATURE: 00000101
 ata2: ahci_reset devices=00000001
 ata2: [MPSAFE]
 ata2: [ITHREAD]
 ata3: <ATA channel 1> on atapci0
 ata3: SATA connect time=0ms
 ata3: ready wait time=17ms
 ata3: ahci_issue_cmd time=100ms cnt=0ms status=00000000
 ata3: ahci_issue_cmd time=0ms cnt=0ms status=00000000
 ata3: ready wait time=1ms
 ata3: SIGNATURE: eb140101
 ata3: ahci_reset devices=00010000
 ata3: [MPSAFE]
 ata3: [ITHREAD]
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 acpi_tz0: <Thermal Zone> on acpi0
 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
 atrtc0: Warning: Couldn't map I/O.
 atrtc0: registered as a time-of-day clock (resolution 1000000us)
 battery0: <ACPI Control Method Battery> on acpi0
 acpi_acad0: <AC Adapter> on acpi0
 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd: the current kbd controller command byte 0047
 atkbd: keyboard ID 0x41ab (2)
 kbd0 at atkbd0
 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: current command byte:0047
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model GlidePoint, device ID 0-00, 2 buttons
 psm0: config:00000000, flags:00000008, packet size:3
 psm0: syncmask:c0, syncbits:00
 cpu0: <ACPI CPU> on acpi0
 ACPI: SSDT @ 0x0x3db1ac20/0x0265 (v  1  PmRef  Cpu0Ist 0x00003000 INTL 0x20050624)
 ACPI: SSDT @ 0x0x3db18620/0x0549 (v  1  PmRef  Cpu0Cst 0x00003001 INTL 0x20050624)
 ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff000332e280 [20070320]
 ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
 ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU0._OSC] (Node 0xffffff00013c9540), AE_AML_INTERNAL
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 cpu1: <ACPI CPU> on acpi0
 ACPI: SSDT @ 0x0x3db19ca0/0x01CF (v  1  PmRef    ApIst 0x00003000 INTL 0x20050624)
 ACPI: SSDT @ 0x0x3db19f20/0x008D (v  1  PmRef    ApCst 0x00003000 INTL 0x20050624)
 ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0003336680 [20070320]
 ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
 ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._OSC] (Node 0xffffff00013c9460), AE_AML_INTERNAL
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 ahc_isa_probe 1: ioport 0x1c00 alloc failed
 ex_isa_identify()
 isa_probe_children: disabling PnP devices
 atkbdc: atkbdc0 already exists; skipping it
 sc: sc0 already exists; skipping it
 vga: vga0 already exists; skipping it
 isa_probe_children: probing non-PnP devices
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
 ppc0: cannot reserve I/O port range
 ppc0: <Parallel port> failed to probe at irq 7 on isa0
 sio0 failed to probe at port 0x3f8 irq 4 on isa0
 sio1 failed to probe at port 0x2f8 irq 3 on isa0
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 isa_probe_children: probing PnP devices
 Device configuration finished.
 procfs registered
 lapic: Divisor 2, Frequency 83125582 hz
 Timecounter "TSC" frequency 1995013728 Hz quality -100
 Timecounters tick every 1.000 msec
 lo0: bpf attached
 hptrr: no controller detected.
 ata2: identify ch->devices=00000001
 usbus7: 480Mbps High Speed USB v2.0
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 12Mbps Full Speed USB v1.0
 usbus3: 480Mbps High Speed USB v2.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 12Mbps Full Speed USB v1.0
 battery0: battery initialization start
 acpi_tz0: _AC0: temperature 52.0 >= setpoint 0.0
 acpi_tz0: switched from NONE to _AC0: 52.0C
 acpi_acad0: acline initialization start
 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
 ad4: 238475MB <WDC WD2500BEVS-88UST0 01.01A01> at ata2-master SATA150
 ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
 GEOM: new disk ad4
 ugen0.1: <Intel> at usbus0
 ushub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 ushub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 ushub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 ushub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 ushub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen5.1: <Intel> at usbus5
 ushub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen6.1: <Intel> at usbus6
 ushub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
 ugen7.1: <Intel> at usbus7
 ushub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
 acpi_acad0: On Line
 acpi_acad0: acline initialization done, tried 1 times
 acpi: bad write to port 0x080 (32), val 0x61
 AcpiOsDerivePciId: \\_SB_.PCI0.RP01.PXCS -> bus 0 dev 28 func 0
 ad4: Intel check1 failed
 ad4: Adaptec check1 failed
 ad4: LSI (v3) check1 failed
 ad4: LSI (v2) check1 failed
 AcpiOsDerivePciId: \\_SB_.PCI0.RP02.PXCS -> bus 0 dev 28 func 1
 AcpiOsDerivePciId: \\_SB_.PCI0.RP03.PXCS -> bus 0 dev 28 func 2
 ad4: FreeBSD check1 failed
 ata3: identify ch->devices=00010000
 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
 ata3: device_reset timeout=1580us
 acd0: <HL-DT-ST DVDRAM GSA-T50N/RV06> DVDR drive at ata3 as master
 acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, SATA150
 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
 acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
 acd0: Audio: play, 256 volume levels
 acd0: Mechanism: ejectable tray, unlocked
 acd0: Medium: no/blank disc
 ATA PseudoRAID loaded
 SMP: AP CPU #1 Launched!
 cpu1 AP:
      ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49
 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50
 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51
 msi: Assigning MSI IRQ 256 to local APIC 1 vector 52
 WARNING: WITNESS option enabled, expect reduced performance.
 GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
 AcpiOsDerivePciId: \\_SB_.PCI0.RP04.PXCS -> bus 0 dev 28 func 3
 AcpiOsDerivePciId: \\_SB_.PCI0.RP05.PXCS -> bus 0 dev 28 func 4
 AcpiOsDerivePciId: \\_SB_.PCI0.RP06.PXCS -> bus 0 dev 28 func 5
 acpi: bad write to port 0x080 (32), val 0x62
 Trying to mount root from ufs:/dev/ad4s1a
 ct_to_ts([2009-02-18 20:13:10]) = 1234987990.000000000
 start_init: trying /sbin/init
 ushub0: 2 ports with 2 removable, self powered
 ushub1: 2 ports with 2 removable, self powered
 ushub2: 2 ports with 2 removable, self powered
 ushub4: 2 ports with 2 removable, self powered
 ushub5: 2 ports with 2 removable, self powered
 ushub6: 2 ports with 2 removable, self powered
 ushub3: 6 ports with 6 removable, self powered
 ushub7: 6 ports with 6 removable, self powered
 ugen7.2: <Vimicro Corp.> at usbus7
 bge0: link UP
 
 link_elf_obj: symbol dev2unit undefined
 linker_load_file: Unsupported file type
 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
 feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate
 _min=1 feeder_rate_max=2016000 feeder_rate_round=25
 pci0: driver added
 found->  vendor=0x8086, dev=0x293e, revid=0x03
 domain=0, bus=0, slot=27, func=0
 class=04-03-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=22
 powerspec 2  supports D0 D3  current D0
 MSI supports 1 message, 64 bit
 pci0:0:27:0: reprobing on driver added
 hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf4a00000-0xf4a03fff irq 22 at devi
 ce 27.0 on pci0
 hdac0: HDA Driver Revision: 20090215_0128
 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf4a00000
 hdac0: attempting to allocate 1 MSI vectors (1 supported)
 hdac0: using IRQ 257 for MSI
 msi: Assigning MSI IRQ 257 to local APIC 0 vector 48
 hdac0: [MPSAFE]
 hdac0: [ITHREAD]
 hdac0: Probing codec #0...
 hdac0: HDA Codec #0: Intel G45 HDMI
 hdac0:  HDA Codec ID: 0x80862802
 hdac0:        Vendor: 0x8086
 hdac0:        Device: 0x2802
 hdac0:      Revision: 0x00
 hdac0:      Stepping: 0x00
 hdac0: PCI Subvendor: 0x3a0d17aa
 hdac0:   Found audio FG nid=1 startnode=2 endnode=4 total=2
 hdac0: Probing codec #2...
 hdac0: HDA Codec #2: Conexant CX20561 (Hermosa)
 hdac0:  HDA Codec ID: 0x14f15051
 hdac0:        Vendor: 0x14f1
 hdac0:        Device: 0x5051
 hdac0:      Revision: 0x00
 hdac0:      Stepping: 0x00
 hdac0: PCI Subvendor: 0x3a0d17aa
 hdac0:   Found audio FG nid=1 startnode=16 endnode=31 total=15
 hdac0:   Found modem FG nid=2 startnode=112 endnode=116 total=4
 hdac0: 
 hdac0: Processing audio FG cad=0 nid=1...
 hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
 hdac0:  nid 3 0x18560010 as  1 seq  0   Digital-out  Jack jack  6 loc 24 color Unknown misc 0
 hdac0: Patched pins configuration:
 hdac0:  nid 3 0x18560010 as  1 seq  0   Digital-out  Jack jack  6 loc 24 color Unknown misc 0
 hdac0: 1 associations found:
 hdac0: Association 0 (1) out:
 hdac0:  Pin nid=3 seq=0
 hdac0: Tracing association 0 (1)
 hdac0:  Pin 3 traced to DAC 2
 hdac0: Association 0 (1) trace succeeded
 hdac0: Tracing input monitor
 hdac0: Tracing beeper
 hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
 hdac0: 
 hdac0: +-------------------+
 hdac0: | DUMPING HDA NODES |
 hdac0: +-------------------+
 hdac0: 
 hdac0: Default Parameter
 hdac0: -----------------
 hdac0:          IN amp: 0x00000000
 hdac0:         OUT amp: 0x00000000
 hdac0: 
 hdac0:             nid: 2
 hdac0:            Name: audio output
 hdac0:      Widget cap: 0x00006211
 hdac0:                  DIGITAL STEREO
 hdac0:     Association: 0 (0x00000001)
 hdac0:             OSS: pcm (pcm)
 hdac0:      Stream cap: 0x00000005
 hdac0:                  AC3 PCM
 hdac0:         PCM cap: 0x001e07f0
 hdac0:                  16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
 hdac0: 
 hdac0:             nid: 3
 hdac0:            Name: pin: Digital-out (Jack)
 hdac0:      Widget cap: 0x0040739d
 hdac0:                  DIGITAL UNSOL STEREO
 hdac0:     Association: 0 (0x00000001)
 hdac0:         Pin cap: 0x00000094
 hdac0:                  PDC OUT
 hdac0:      Pin config: 0x18560010
 hdac0:     Pin control: 0x00000040 OUT
 hdac0:      Output amp: 0x80000000
 hdac0:                  mute=1 step=0 size=0 offset=0
 hdac0:     connections: 1
 hdac0:           |
 hdac0:           + <- nid=2 [audio output]
 hdac0: 
 hdac0: Processing audio FG cad=2 nid=1...
 hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
 hdac0:  nid 22 0x01214040 as  4 seq  0    Headphones  Jack jack  1 loc  1 color   Green misc 0
 hdac0:  nid 23 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1
 hdac0:  nid 24 0x01a19030 as  3 seq  0           Mic  Jack jack  1 loc  1 color    Pink misc 0
 hdac0:  nid 25 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1
 hdac0:  nid 26 0x92170110 as  1 seq  0       Speaker Fixed jack  7 loc 18 color Unknown misc 1
 hdac0:  nid 27 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1
 hdac0:  nid 28 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1
 hdac0:  nid 29 0x97a70120 as  2 seq  0           Mic Fixed jack  7 loc 23 color Unknown misc 1
 hdac0: Patched pins configuration:
 hdac0:  nid 22 0x01214040 as  4 seq  0    Headphones  Jack jack  1 loc  1 color   Green misc 0
 hdac0:  nid 23 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1 [DISABLED]
 hdac0:  nid 24 0x01a19030 as  3 seq  0           Mic  Jack jack  1 loc  1 color    Pink misc 0
 hdac0:  nid 25 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1 [DISABLED]
 hdac0:  nid 26 0x92170110 as  1 seq  0       Speaker Fixed jack  7 loc 18 color Unknown misc 1
 hdac0:  nid 27 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1 [DISABLED]
 hdac0:  nid 28 0x400001f0 as 15 seq  0      Line-out  None jack  0 loc  0 color Unknown misc 1 [DISABLED]
 hdac0:  nid 29 0x97a70120 as  2 seq  0           Mic Fixed jack  7 loc 23 color Unknown misc 1
 hdac0: 4 associations found:
 hdac0: Association 0 (1) out:
 hdac0:  Pin nid=26 seq=0
 hdac0: Association 1 (2) in:
 hdac0:  Pin nid=29 seq=0
 hdac0: Association 2 (3) in:
 hdac0:  Pin nid=24 seq=0
 hdac0: Association 3 (4) out:
 hdac0:  Pin nid=22 seq=0
 hdac0: Tracing association 0 (1)
 hdac0:  Pin 26 traced to DAC 16
 hdac0: Association 0 (1) trace succeeded
 hdac0: Tracing association 1 (2)
 hdac0:  Pin 29 traced to ADC 20
 hdac0: Association 1 (2) trace succeeded
 hdac0: Tracing association 2 (3)
 hdac0:  Pin 24 traced to ADC 21
 hdac0: Association 2 (3) trace succeeded
 hdac0: Tracing association 3 (4)
 hdac0:  Pin 22 traced to DAC 17
 hdac0: Association 3 (4) trace succeeded
 hdac0: Tracing input monitor
 hdac0: Tracing beeper
 hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
 hdac0: 
 hdac0: +-------------------+
 hdac0: | DUMPING HDA NODES |
 hdac0: +-------------------+
 hdac0: 
 hdac0: Default Parameter
 hdac0: -----------------
 hdac0:      Stream cap: 0x00000001
 hdac0:                  PCM
 hdac0:         PCM cap: 0x000e0160
 hdac0:                  16 20 24 bits, 44 48 96 KHz
 hdac0:          IN amp: 0x00000000
 hdac0:         OUT amp: 0x00000000
 hdac0: 
 hdac0:             nid: 16
 hdac0:            Name: audio output
 hdac0:      Widget cap: 0x00000c1d
 hdac0:                  LRSWAP PWR STEREO
 hdac0:     Association: 0 (0x00000001)
 hdac0:             OSS: pcm (pcm)
 hdac0:      Stream cap: 0x00000001
 hdac0:                  PCM
 hdac0:         PCM cap: 0x000e0560
 hdac0:                  16 20 24 bits, 44 48 96 192 KHz
 hdac0:      Output amp: 0x00034a4a
 hdac0:                  mute=0 step=74 size=3 offset=74
 hdac0: 
 hdac0:             nid: 17
 hdac0:            Name: audio output
 hdac0:      Widget cap: 0x00000c1d
 hdac0:                  LRSWAP PWR STEREO
 hdac0:     Association: 3 (0x00000001)
 hdac0:             OSS: pcm (pcm)
 hdac0:      Stream cap: 0x00000001
 hdac0:                  PCM
 hdac0:         PCM cap: 0x000e0560
 hdac0:                  16 20 24 bits, 44 48 96 192 KHz
 hdac0:      Output amp: 0x00034a4a
 hdac0:                  mute=0 step=74 size=3 offset=74
 hdac0: 
 hdac0:             nid: 18 [DISABLED]
 hdac0:            Name: audio output
 hdac0:      Widget cap: 0x00000211
 hdac0:                  DIGITAL STEREO
 hdac0:      Stream cap: 0x00000005
 hdac0:                  AC3 PCM
 hdac0:         PCM cap: 0x000e0160
 hdac0:                  16 20 24 bits, 44 48 96 KHz
 hdac0: 
 hdac0:             nid: 19
 hdac0:            Name: beep widget
 hdac0:      Widget cap: 0x0070000c
 hdac0:     Association: -2 (0x00000000)
 hdac0:             OSS: speaker (speaker)
 hdac0:      Output amp: 0x00170303
 hdac0:                  mute=0 step=3 size=23 offset=3
 hdac0: 
 hdac0:             nid: 20
 hdac0:            Name: audio input
 hdac0:      Widget cap: 0x00100d1b
 hdac0:                  LRSWAP PWR STEREO
 hdac0:     Association: 1 (0x00000001)
 hdac0:      Stream cap: 0x00000001
 hdac0:                  PCM
 hdac0:         PCM cap: 0x000e0160
 hdac0:                  16 20 24 bits, 44 48 96 KHz
 hdac0:       Input amp: 0x0003504a
 hdac0:                  mute=0 step=80 size=3 offset=74
 hdac0:     connections: 2
 hdac0:           |
 hdac0:           + <- nid=29 [pin: Mic (Fixed)] (selected)
 hdac0:           + [DISABLED] <- nid=23 [pin: Line-out (None)] [DISABLED]
 hdac0: 
 hdac0:             nid: 21
 hdac0:            Name: audio input
 hdac0:      Widget cap: 0x00100d1b
 hdac0:                  LRSWAP PWR STEREO
 hdac0:     Association: 2 (0x00000001)
 hdac0:      Stream cap: 0x00000001
 hdac0:                  PCM
 hdac0:         PCM cap: 0x000e0160
 hdac0:                  16 20 24 bits, 44 48 96 KHz
 hdac0:       Input amp: 0x0003504a
 hdac0:                  mute=0 step=80 size=3 offset=74
 hdac0:     connections: 1
 hdac0:           |
 hdac0:           + <- nid=24 [pin: Mic (Pink Jack)]
 hdac0: 
 hdac0:             nid: 22
 hdac0:            Name: pin: Headphones (Green Jack)
 hdac0:      Widget cap: 0x00400581
 hdac0:                  PWR UNSOL STEREO
 hdac0:     Association: 3 (0x00000001)
 hdac0:         Pin cap: 0x0000001c
 hdac0:                  PDC HP OUT
 hdac0:      Pin config: 0x01214040
 hdac0:     Pin control: 0x000000c0 HP OUT
 hdac0:     connections: 2
 hdac0:           |
 hdac0:           + [DISABLED] <- nid=16 [audio output]
 hdac0:           + <- nid=17 [audio output] (selected)
 hdac0: 
 hdac0:             nid: 23 [DISABLED]
 hdac0:            Name: pin: Line-out (None)
 hdac0:      Widget cap: 0x0040048b
 hdac0:                  PWR UNSOL STEREO
 hdac0:         Pin cap: 0x00001224
 hdac0:                  PDC IN VREF[ 50 80 ]
 hdac0:      Pin config: 0x400001f0
 hdac0:     Pin control: 0x00000000
 hdac0:       Input amp: 0x00270400
 hdac0:                  mute=0 step=4 size=39 offset=0
 hdac0: 
 hdac0:             nid: 24
 hdac0:            Name: pin: Mic (Pink Jack)
 hdac0:      Widget cap: 0x0040048b
 hdac0:                  PWR UNSOL STEREO
 hdac0:     Association: 2 (0x00000001)
 hdac0:             OSS: mic (mic)
 hdac0:         Pin cap: 0x00001224
 hdac0:                  PDC IN VREF[ 50 80 ]
 hdac0:      Pin config: 0x01a19030
 hdac0:     Pin control: 0x00000024 IN VREFs
 hdac0:       Input amp: 0x00270400
 hdac0:                  mute=0 step=4 size=39 offset=0
 hdac0: 
 hdac0:             nid: 25 [DISABLED]
 hdac0:            Name: pin: Line-out (None)
 hdac0:      Widget cap: 0x00400581
 hdac0:                  PWR UNSOL STEREO
 hdac0:         Pin cap: 0x00000014
 hdac0:                  PDC OUT
 hdac0:      Pin config: 0x400001f0
 hdac0:     Pin control: 0x00000000
 hdac0:     connections: 2
 hdac0:           |
 hdac0:           + <- nid=16 [audio output] (selected)
 hdac0:           + <- nid=17 [audio output]
 hdac0: 
 hdac0:             nid: 26
 hdac0:            Name: pin: Speaker (Fixed)
 hdac0:      Widget cap: 0x00400501
 hdac0:                  PWR STEREO
 hdac0:     Association: 0 (0x00000001)
 hdac0:         Pin cap: 0x00010010
 hdac0:                  OUT EAPD
 hdac0:      Pin config: 0x92170110
 hdac0:     Pin control: 0x00000040 OUT
 hdac0:            EAPD: 0x00000002
 hdac0:     connections: 2
 hdac0:           |
 hdac0:           + <- nid=16 [audio output] (selected)
 hdac0:           + [DISABLED] <- nid=17 [audio output]
 hdac0: 
 hdac0:             nid: 27 [DISABLED]
 hdac0:            Name: pin: Line-out (None)
 hdac0:      Widget cap: 0x00400500
 hdac0:                  PWR
 hdac0:         Pin cap: 0x00010010
 hdac0:                  OUT EAPD
 hdac0:      Pin config: 0x400001f0
 hdac0:     Pin control: 0x00000000
 hdac0:            EAPD: 0x00000002
 hdac0:     connections: 2
 hdac0:           |
 hdac0:           + <- nid=16 [audio output] (selected)
 hdac0:           + <- nid=17 [audio output]
 hdac0: 
 hdac0:             nid: 28 [DISABLED]
 hdac0:            Name: pin: Line-out (None)
 hdac0:      Widget cap: 0x00400701
 hdac0:                  PWR DIGITAL STEREO
 hdac0:         Pin cap: 0x00000010
 hdac0:                  OUT
 hdac0:      Pin config: 0x400001f0
 hdac0:     Pin control: 0x00000000
 hdac0:     connections: 1
 hdac0:           |
 hdac0:           + <- nid=18 [audio output] [DISABLED]
 hdac0: 
 hdac0:             nid: 29
 hdac0:            Name: pin: Mic (Fixed)
 hdac0:      Widget cap: 0x0040040b
 hdac0:                  PWR STEREO
 hdac0:     Association: 1 (0x00000001)
 hdac0:             OSS: monitor (monitor)
 hdac0:         Pin cap: 0x00000020
 hdac0:                  IN
 hdac0:      Pin config: 0x97a70120
 hdac0:     Pin control: 0x00000020 IN
 hdac0:       Input amp: 0x00270400
 hdac0:                  mute=0 step=4 size=39 offset=0
 hdac0: 
 hdac0:             nid: 30 [DISABLED]
 hdac0:            Name: vendor widget
 hdac0:      Widget cap: 0x00f00000
 hdac0: 
 hdac0: Processing modem FG cad=2 nid=2...
 hdac0: 
 found->  vendor=0x8086, dev=0x2930, revid=0x03
 domain=0, bus=0, slot=31, func=3
 class=0c-05-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=c, irq=19
 pci0:0:31:3: reprobing on driver added
 pci2: driver added
 found->  vendor=0x197b, dev=0x2382, revid=0x00
 domain=0, bus=2, slot=0, func=0
 class=08-80-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message
 pci0:2:0:0: reprobing on driver added
 found->  vendor=0x197b, dev=0x2381, revid=0x00
 domain=0, bus=2, slot=0, func=2
 class=08-05-01, hdrtype=0x00, mfdev=1
 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message
 pci0:2:0:2: reprobing on driver added
 found->  vendor=0x197b, dev=0x2383, revid=0x00
 domain=0, bus=2, slot=0, func=3
 class=08-80-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message
 pci0:2:0:3: reprobing on driver added
 pci3: driver added
 pci4: driver added
 found->  vendor=0x8086, dev=0x4237, revid=0x00
 domain=0, bus=4, slot=0, func=0
 class=02-80-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=18
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message, 64 bit
 pci0:4:0:0: reprobing on driver added
 pci5: driver added
 pci7: driver added
 pci8: driver added
 pcm0: <HDA Intel G45 HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
 pcm0: +--------------------------------------+
 pcm0: | DUMPING PCM Playback/Record Channels |
 pcm0: +--------------------------------------+
 pcm0: 
 pcm0: Playback:
 pcm0: 
 pcm0:      Stream cap: 0x00000005
 pcm0:                  AC3 PCM
 pcm0:         PCM cap: 0x001e07f0
 pcm0:                  16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
 pcm0:             DAC: 2
 pcm0: 
 pcm0: +--------------------------------+
 pcm0: | DUMPING Playback/Record Pathes |
 pcm0: +--------------------------------+
 pcm0: 
 pcm0: Playback:
 pcm0: 
 pcm0:     nid=3 [pin: Digital-out (Jack)]
 pcm0:       |
 pcm0:       + <- nid=2 [audio output] [src: pcm]
 pcm0: 
 pcm0: +-------------------------+
 pcm0: | DUMPING Volume Controls |
 pcm0: +-------------------------+
 pcm0: 
 pcm0: Master Volume (OSS: vol)
 pcm0:    |
 pcm0:    +- ctl  1 (nid   3 in ):    mute
 pcm0: 
 pcm0: PCM Volume (OSS: pcm)
 pcm0:    |
 pcm0:    +- ctl  1 (nid   3 in ):    mute
 pcm0: 
 pcm0: Mixer "vol":
 pcm0: Mixer "pcm":
 pcm0: clone manager: deadline=750ms flags=0x8000001e
 pcm0: sndbuf_setmap eda0000, 4000; 0xfffffffe62b20000 -> eda0000
 feeder_init(0xffffff0003877a00) on feeder_vchan returned -1
 pcm1: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 2 nid 1 on hdac0
 pcm1: +--------------------------------------+
 pcm1: | DUMPING PCM Playback/Record Channels |
 pcm1: +--------------------------------------+
 pcm1: 
 pcm1: Playback:
 pcm1: 
 pcm1:      Stream cap: 0x00000001
 pcm1:                  PCM
 pcm1:         PCM cap: 0x000e0560
 pcm1:                  16 20 24 bits, 44 48 96 192 KHz
 pcm1:             DAC: 16
 pcm1: 
 pcm1: Record:
 pcm1: 
 pcm1:      Stream cap: 0x00000001
 pcm1:                  PCM
 pcm1:         PCM cap: 0x000e0160
 pcm1:                  16 20 24 bits, 44 48 96 KHz
 pcm1:             ADC: 20
 pcm1: 
 pcm1: +--------------------------------+
 pcm1: | DUMPING Playback/Record Pathes |
 pcm1: +--------------------------------+
 pcm1: 
 pcm1: Playback:
 pcm1: 
 pcm1:     nid=26 [pin: Speaker (Fixed)]
 pcm1:       |
 pcm1:       + <- nid=16 [audio output] [src: pcm]
 pcm1: 
 pcm1: Record:
 pcm1: 
 pcm1:     nid=20 [audio input]
 pcm1:       |
 pcm1:       + <- nid=29 [pin: Mic (Fixed)] [src: monitor]
 pcm1: 
 pcm1: +-------------------------+
 pcm1: | DUMPING Volume Controls |
 pcm1: +-------------------------+
 pcm1: 
 pcm1: Master Volume (OSS: vol)
 pcm1:    |
 pcm1:    +- ctl  1 (nid  16 out):    -74/0dB (75 steps)
 pcm1: 
 pcm1: PCM Volume (OSS: pcm)
 pcm1:    |
 pcm1:    +- ctl  1 (nid  16 out):    -74/0dB (75 steps)
 pcm1: 
 pcm1: Microphone2 Volume (OSS: monitor)
 pcm1:    |
 pcm1:    +- ctl  8 (nid  29 out):    0/40dB (5 steps)
 pcm1: 
 pcm1: Speaker/Beep Volume (OSS: speaker)
 pcm1:    |
 pcm1:    +- ctl  3 (nid  19 out):    -18/0dB (4 steps)
 pcm1: 
 pcm1: Recording Level (OSS: rec)
 pcm1:    |
 pcm1:    +- ctl  4 (nid  20 in   0): -74/6dB (81 steps)
 pcm1: 
 pcm1: Mixer "vol":
 pcm1: Mixer "pcm":
 pcm1: Mixer "speaker":
 pcm1: Mixer "rec":
 pcm1: Mixer "ogain":
 pcm1: Mixer "monitor":
 pcm1: clone manager: deadline=750ms flags=0x8000001e
 pcm1: sndbuf_setmap edb0000, 4000; 0xfffffffe62b30000 -> edb0000
 pcm1: sndbuf_setmap edc0000, 4000; 0xfffffffe62b40000 -> edc0000
 pcm2: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 2 nid 1 on hdac0
 pcm2: +--------------------------------------+
 pcm2: | DUMPING PCM Playback/Record Channels |
 pcm2: +--------------------------------------+
 pcm2: 
 pcm2: Playback:
 pcm2: 
 pcm2:      Stream cap: 0x00000001
 pcm2:                  PCM
 pcm2:         PCM cap: 0x000e0560
 pcm2:                  16 20 24 bits, 44 48 96 192 KHz
 pcm2:             DAC: 17
 pcm2: 
 pcm2: Record:
 pcm2: 
 pcm2:      Stream cap: 0x00000001
 pcm2:                  PCM
 pcm2:         PCM cap: 0x000e0160
 pcm2:                  16 20 24 bits, 44 48 96 KHz
 pcm2:             ADC: 21
 pcm2: 
 pcm2: +--------------------------------+
 pcm2: | DUMPING Playback/Record Pathes |
 pcm2: +--------------------------------+
 pcm2: 
 pcm2: Playback:
 pcm2: 
 pcm2:     nid=22 [pin: Headphones (Green Jack)]
 pcm2:       |
 pcm2:       + <- nid=17 [audio output] [src: pcm]
 pcm2: 
 pcm2: Record:
 pcm2: 
 pcm2:     nid=21 [audio input]
 pcm2:       |
 pcm2:       + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
 pcm2: 
 pcm2: +-------------------------+
 pcm2: | DUMPING Volume Controls |
 pcm2: +-------------------------+
 pcm2: 
 pcm2: Master Volume (OSS: vol)
 pcm2:    |
 pcm2:    +- ctl  2 (nid  17 out):    -74/0dB (75 steps)
 pcm2: 
 pcm2: PCM Volume (OSS: pcm)
 pcm2:    |
 pcm2:    +- ctl  2 (nid  17 out):    -74/0dB (75 steps)
 pcm2: 
 pcm2: Microphone Volume (OSS: mic)
 pcm2:    |
 pcm2:    +- ctl  7 (nid  24 out):    0/40dB (5 steps)
 pcm2: 
 pcm2: Recording Level (OSS: rec)
 pcm2:    |
 pcm2:    +- ctl  5 (nid  21 in   0): -74/6dB (81 steps)
 pcm2: 
 pcm2: Mixer "vol":
 pcm2: Mixer "pcm":
 pcm2: Mixer "mic":
 pcm2: Mixer "rec":
 pcm2: clone manager: deadline=750ms flags=0x8000001e
 pcm2: sndbuf_setmap edd0000, 4000; 0xfffffffe62b50000 -> edd0000
 pcm2: sndbuf_setmap 38b0000, 4000; 0xfffffffe62b60000 -> 38b0000
 feeder_init(0xffffff0003873280) on feeder_vchan returned -1
 pci0: driver added
 found->  vendor=0x8086, dev=0x2930, revid=0x03
 domain=0, bus=0, slot=31, func=3
 class=0c-05-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=c, irq=19
 pci0:0:31:3: reprobing on driver added
 pci2: driver added
 found->  vendor=0x197b, dev=0x2382, revid=0x00
 domain=0, bus=2, slot=0, func=0
 class=08-80-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message
 pci0:2:0:0: reprobing on driver added
 found->  vendor=0x197b, dev=0x2381, revid=0x00
 domain=0, bus=2, slot=0, func=2
 class=08-05-01, hdrtype=0x00, mfdev=1
 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message
 pci0:2:0:2: reprobing on driver added
 sdhci0: <JMicron JMB38X SD> mem 0xf4500400-0xf45004ff irq 16 at device 0.2 on pci2
 sdhci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf4500400
 sdhci0-slot0: 50MHz 4bits 3.3V DMA
 sdhci0-slot0: ============== REGISTER DUMP ==============
 sdhci0-slot0: Sys addr: 0x00000000 | Version:  0x0000ac01
 sdhci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
 sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
 sdhci0-slot0: Present:  0x00080000 | Host ctl: 0x00000000
 sdhci0-slot0: Power:    0x00000000 | Blk gap:  0x00000000
 sdhci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000000
 sdhci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
 sdhci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
 sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
 sdhci0-slot0: Caps:     0x014832b2 | Max curr: 0x00000000
 sdhci0-slot0: ===========================================
 sdhci0: 1 slot(s) allocated
 sdhci0: [MPSAFE]
 sdhci0: [ITHREAD]
 found->  vendor=0x197b, dev=0x2383, revid=0x00
 domain=0, bus=2, slot=0, func=3
 class=08-80-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message
 pci0:2:0:3: reprobing on driver added
 pci3: driver added
 pci4: driver added
 found->  vendor=0x8086, dev=0x4237, revid=0x00
 domain=0, bus=4, slot=0, func=0
 class=02-80-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=18
 powerspec 3  supports D0 D3  current D0
 MSI supports 1 message, 64 bit
 pci0:4:0:0: reprobing on driver added
 pci5: driver added
 pci7: driver added
 pci8: driver added
 t_delta 15.fb845fe6da424be0 too short
 pid 976 (sshd) is using legacy pty devices
 battery0: battery initialization failed, giving up
 lock order reversal:
 1st 0xfffffffe53dd0bf8 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2443
 2nd 0xffffff0003423a00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:275
 KDB: stack backtrace:
 db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
 _witness_debugger() at _witness_debugger+0x2e
 witness_checkorder() at witness_checkorder+0x81e
 _sx_xlock() at _sx_xlock+0x55
 ufsdirhash_acquire() at ufsdirhash_acquire+0x33
 ufsdirhash_add() at ufsdirhash_add+0x19
 ufs_direnter() at ufs_direnter+0x88b
 ufs_makeinode() at ufs_makeinode+0x338
 VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
 vn_open_cred() at vn_open_cred+0x479
 kern_openat() at kern_openat+0x169
 syscall() at syscall+0x1bf
 Xfast_syscall() at Xfast_syscall+0xab
 --- syscall (5, FreeBSD ELF64, open), rip = 0x8016351dc, rsp = 0x7fffffffdd08, rbp = 0x15 ---
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200902182100.n1IL05F2072162>