Date: Wed, 22 Jun 2005 14:46:29 +0200 From: stefan@aeschbacher.ch To: hackers@freebsd.org Subject: Re: Intel SRCS16 Was: (no subject) Message-ID: <1119444389.42b95da5b3b1d@horde.nts.ch> In-Reply-To: <1119443811.42b95b63d6299@horde.nts.ch> References: <1119443811.42b95b63d6299@horde.nts.ch>
next in thread | previous in thread | raw e-mail | index | archive | help
apologies for the ommited subject Stefan Zitat von stefan@aeschbacher.ch: > Hi list > > I have an Intel Motherboard with a SRCS16 raid controller. According to > amr(4), this controller should be supported. Unfortunately the 5.4 > Install > CD does not recognize the raid controller. Loading amr before booting > does > not help (results in the error message seen in the dmesg below). When > booting normally, the amr module is not loaded. > > Now I have the following questions: > > Is this version of the Intel Controller not supported? If this is the > case, > is there a simple solution to get it recognized? (a quick glance at the > amr > code was not enough to enlighten me) > > Is there an easy way to setup gmirror with the install CD in case the > controller does not work? (even when loaded the geom_mirror module, the > gmirror tool does not know about the 'label' command) > > > thanks > > Stefan > > > dmesg: > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 > root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > module_register: module amr/amrd already exists! > Module amr/amrd failed to register: 17 > module_register: module pci/amr already exists! > Module pci/amr failed to register: 17 > ACPI APIC Table: <A M I OEMAPIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > real memory = 1073610752 (1023 MB) > avail memory = 1036853248 (988 MB) > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > ioapic2 <Version 2.0> irqs 48-71 on motherboard > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <A M I OEMRSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <unknown> at device 0.1 (no driver attached) > pci0: <base peripheral> at device 1.0 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > > em0: <Intel(R) PRO/1000 Network Connection, Version - > 1.7.35> > port 0xc880-0xc8bf mem 0xfce00000-0xfce3ffff,0xfcec0000-0xfcedffff irq > 24 > at device 3.0 on pci2 > em0: Ethernet address: 00:04:23:b7:6c:4c > em0: Speed:N/A Duplex:N/A > > em1: <Intel(R) PRO/1000 Network Connection, Version - > 1.7.35> > port 0xcc00-0xcc3f mem 0xfce80000-0xfcebffff,0xfcee0000-0xfcefffff irq > 27 > at device 3.1 on pci2 > em1: Ethernet address: 00:04:23:b7:6c:4d > em1: Speed:N/A Duplex:N/A > pci1: <base peripheral, interrupt controller> at device 0.1 (no driver > attached) > pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 > pci3: <ACPI PCI bus> on pcib3 > > em2: <Intel(R) PRO/1000 Network Connection, Version - > 1.7.35> > port 0xd880-0xd8bf mem 0xfcfa0000-0xfcfbffff irq 54 at device 4.0 on > pci3 > em2: Ethernet address: 00:0e:0c:4e:2f:d0 > em2: Speed:N/A Duplex:N/A > > em3: <Intel(R) PRO/1000 Network Connection, Version - > 1.7.35> > port 0xdc00-0xdc3f mem 0xfcfe0000-0xfcffffff irq 55 at device 4.1 on > pci3 > em3: Ethernet address: 00:0e:0c:4e:2f:d1 > em3: Speed:N/A Duplex:N/A > pci1: <base peripheral, interrupt controller> at device 0.3 (no driver > attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> > port > 0xb800-0xb81f irq 16 at device 29.0 on pci0 > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port > 0xb880-0xb89f irq 19 at device 29.1 on pci0 > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbc00-0xbc1f irq > 18 > at device 29.2 on pci0 > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 29.7 (no driver attached) > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pci4: <display, VGA> at device 12.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci0 > > ata1: channel #1 on atapci0 > atapci1: <Intel ICH5 SATA150 controller> port > 0xac00-0xac0f,0xb000-0xb003,0xb080-0xb087,0xb400-0xb403,0xb480-0xb487 > irq > 18 at device 31.2 on pci0 > ata2: channel #0 on atapci1 > ata3: channel #1 on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > > fdc0: <floppy drive controller (FDE)> port > 0x3f7,0x3f0-0x3f5 > irq 6 drq 2 on acpi0 > orm0: <ISA Option ROMs> at iomem > 0xd1000-0xd1fff,0xd0000-0xd0fff,0xcf000-0xcffff,0xce000-0xcefff,0xca800-0xcdfff,0xc0000-0xca7ff > on isa0 > pmtimer0 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounter "TSC" frequency 2992518045 Hz quality 800 > Timecounters tick every 10.000 msec > md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09dde24 > acd0: CDRW <Slimtype COMBO SOSC-2483K/KK0A> at ata0-master PIO4 > ad4: 239372MB <Maxtor 7L250S0/BANC1E00> [486344/16/63] at ata2-master > SATA150 > ad6: 239372MB <Maxtor 7L250S0/BANC1E00> [486344/16/63] at ata3-master > SATA150 > Mounting root from ufs:/dev/md0 > em2: Link is up 100 Mbps Full Duplex > > Output of pciconf -l -v: > hostb0@pci0:0:0: class=0x060000 card=0x10798086 chip=0x35908086 > rev=0x0a hdr=0x00 > class = bridge > subclass = HOST-PCI > none0@pci0:0:1: class=0xff0000 card=0x10798086 chip=0x35918086 rev=0x0a > hdr=0x00 > none1@pci0:1:0: class=0x088000 card=0x10798086 chip=0x35948086 rev=0x0a > hdr=0x00 > class = base peripheral > pcib1@pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x0a > hdr=0x01 > class = bridge > subclass = PCI-PCI > uhci0@pci0:29:0: class=0x0c0300 card=0x10798086 chip=0x24d28086 > rev=0x02 hdr=0x00 > class = serial bus > subclass = USB > uhci1@pci0:29:1: class=0x0c0300 card=0x10798086 chip=0x24d48086 > rev=0x02 hdr=0x00 > class = serial bus > subclass = USB > uhci2@pci0:29:2: class=0x0c0300 card=0x10798086 chip=0x24d78086 > rev=0x02 hdr=0x00 > class = serial bus > subclass = USB > none2@pci0:29:7: class=0x0c0320 card=0x10798086 chip=0x24dd8086 > rev=0x02 hdr=0x00 > class = serial bus > subclass = USB > pcib4@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 > rev=0xc2 hdr=0x01 > class = bridge > subclass = PCI-PCI > isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 > rev=0x02 hdr=0x00 > class = bridge > subclass = PCI-ISA > atapci0@pci0:31:1: class=0x01018a card=0x10798086 chip=0x24db8086 > rev=0x02 hdr=0x00 > class = mass storage > subclass = ATA > atapci1@pci0:31:2: class=0x01048f card=0x34388086 chip=0x24df8086 > rev=0x02 hdr=0x00 > class = mass storage > subclass = RAID > none3@pci0:31:3: class=0x0c0500 card=0x10798086 chip=0x24d38086 > rev=0x02 hdr=0x00 > class = serial bus > subclass = SMBus > pcib2@pci1:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x09 > hdr=0x01 > class = bridge > subclass = PCI-PCI > none4@pci1:0:1: class=0x080020 card=0x10798086 chip=0x03268086 rev=0x09 > hdr=0x00 > class = base peripheral > subclass = interrupt controller > pcib3@pci1:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x09 > hdr=0x01 > class = bridge > subclass = PCI-PCI > none5@pci1:0:3: class=0x080020 card=0x10798086 chip=0x03278086 rev=0x09 > hdr=0x00 > class = base peripheral > subclass = interrupt controller > em0@pci2:3:0: class=0x020000 card=0x11798086 chip=0x10798086 rev=0x03 > hdr=0x00 > class = network > subclass = ethernet > em1@pci2:3:1: class=0x020000 card=0x11798086 chip=0x10798086 rev=0x03 > hdr=0x00 > class = network > subclass = ethernet > em2@pci3:4:0: class=0x020000 card=0x10798086 chip=0x10798086 rev=0x03 > hdr=0x00 > class = network > subclass = ethernet > em3@pci3:4:1: class=0x020000 card=0x10798086 chip=0x10798086 rev=0x03 > hdr=0x00 > class = network > subclass = ethernet > none6@pci4:12:0: class=0x030000 card=0x10798086 chip=0x47521002 > rev=0x27 hdr=0x00 > class = display > subclass = VGA > _______________________________________________ > freebsd-hackers@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > To unsubscribe, send any mail to > "freebsd-hackers-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1119444389.42b95da5b3b1d>