Date: Sat, 12 Jan 2013 14:52:45 +0400 From: Slawa Olhovchenkov <slw@zxy.spb.ru> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Atheros 9220 don't return from S3 state Message-ID: <20130112105245.GF67643@zxy.spb.ru> In-Reply-To: <CAJ-VmomBRDBk9oOaZo-6kvLWYvFxrH99XhyHH9FeyUta6pqzww@mail.gmail.com> References: <20130109121613.GO1967@zxy.spb.ru> <50edf68e.ec05320a.6ea9.ffff8ee4@mx.google.com> <20130110080729.GQ1967@zxy.spb.ru> <CAJ-VmonkpnV=H0-pP-6Rv%2BvHoU4Sdi-7KzgLKz9%2BHjmXtuZGkA@mail.gmail.com> <20130111075136.GA67643@zxy.spb.ru> <CAJ-VmomBRDBk9oOaZo-6kvLWYvFxrH99XhyHH9FeyUta6pqzww@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jan 11, 2013 at 02:19:38PM -0800, Adrian Chadd wrote: > .. so there's no _specific_ code being run when it goes to sleep or > comes back from sleep for the 11n PCI NICs (AR5416, AR9160, AR9220, > AR9227..) .. there's some code to tinker with the internal reset > line(s) that force the hardware to re-initialise, but that's not > appropriate for you. > > The problem here is: > > * it probe/attches fine; > * you go to sleep; > * you come back from sleep; > * the PCI registers seem to be all 0xffffffff; which means the slot or > the card is entirely asleep. Yes. > So it's not something I can do when the NIC comes back - there's > likely something that needs to happen to the PCI interface inside the > AR9220 before you put the chip to sleep. And I don't (yet) have > anything like that in the driver(s) that I've seen internally. May be need to do something in firmware code? > But we need to first eliminate that it's the specific slot in > question.. does Linux work right? I can't try linux -- no space to install. Now I try Windows XP and under windows don't work after resume also, strange. But I don't sure about rigth driver -- card vendor is TP-Link, driver is just atheros driver. Before installed this card in this slot was installed intel wifi, need to test with intel card and windows?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130112105245.GF67643>