Date: Fri, 17 Oct 2008 16:48:34 -0700 From: "Steve Franks" <stevefranks@ieee.org> To: freebsd-hardware@freebsd.org Subject: Re: LG combo drive and Attansic Technology ethernet card on Asus P5Q Pro Message-ID: <539c60b90810171648m39106b4ao28ffa07ea990a639@mail.gmail.com> In-Reply-To: <20081014042713.GA39900@icarus.home.lan> References: <20081004034524.GA44662@icarus.home.lan> <200810040649.GAA19778@sopwith.solgatos.com> <20081004073304.GA48931@icarus.home.lan> <20081004073930.GA49756@icarus.home.lan> <20081014042713.GA39900@icarus.home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Oct 13, 2008 at 9:27 PM, Jeremy Chadwick <koitsu@freebsd.org> wrote: > On Sat, Oct 04, 2008 at 12:39:30AM -0700, Jeremy Chadwick wrote: >> On Sat, Oct 04, 2008 at 12:33:04AM -0700, Jeremy Chadwick wrote: >> > On Fri, Oct 03, 2008 at 11:49:01PM +0100, Dieter wrote: >> > > >> The drive is a new LG combo drive, I believe GH22LP20 or something close to it. >> > > >> > > I have an older LG PATA combo drive which works ok. >> > > >> > > Does it show up when booting? (Does dmesg work from the installation shell?) >> > > >> > > Maybe you need to "kldload atapicam" ? Or is that only needed for writing, >> > > I forget... >> > > >> > > > The only thing I can think of is that the P5Q boards use a Marvell >> > > > ATA/IDE controller (yes, you read that correctly). I wonder if FreeBSD >> > > > somehow lacks support for this... >> > > >> > > 7.0 ata man page claims support for: >> > > >> > > Marvell 88SX5040, 88SX5041, 88SX5080, 88SX5081, 88SX6041, >> > > 88SX6081, 88SX6101, 88SX6141. >> > >> > None of these are what's on the P5Q series boards. The P5Q series >> > boards use a Marvell 88SE6102 Super I/O chip, which also drives IDE/PATA >> > devices. (SATA is driven via ICH10 or ICH10R). >> > >> > I'm left to believe FreeBSD simply lacks support for this very new >> > Marvell chip. I'm willing to bet there is no sign of ata(4) devices nor >> > atapci(4) PCI association during boot-up. >> >> Mac folks are seeing the same problem: >> >> http://forum.insanelymac.com/index.php?showtopic=128985 >> http://www.insanelymac.com/lofiversion/index.php/t99634.html >> >> Wikipedia states the 88SE6121, not the 88SE6102, is used on P5Q series >> boards. But the P5Q SE motherboard manual states it's a 88SE6102. >> >> http://en.wikipedia.org/wiki/List_of_Marvell_Technology_Group_chipsets >> >> So either the motherboard manual is wrong, Wikipedia is wrong, or the >> P5Q SE and P5Q Pro contain different models/versions of ICs. >> >> When I get a P5Q SE for Yong-Hyeon, I'll make note of what's >> silkscreened on the ASIC. > > Yong-Hyeon received my hardware yesterday. Before I shipped it, I > made note of the silkscreening on numerous chips: > > Atheros AR8121-AL1E = GigE NIC + PHY > Marvell 88SE6102-NNC1 = ATA/IDE controller > Nuvoton/Winbond W83667HG-A = Super I/O + hardware monitoring > > -- > | Jeremy Chadwick jdc at parodius.com | > | Parodius Networking http://www.parodius.com/ | > | UNIX Systems Administrator Mountain View, CA, USA | > | Making life hard for others since 1977. PGP: 4BD6C0CB | > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" > In a related issue, I've got a L2 (not L1 or L1E) that shows up when I boot PC-BSD, but not with 7.1 prerelease. KDE drove me nuts, though, so I just bought a $15 pci 100T to replace it. Still, I'm suprized that the driver shows up in PC-BSD - perhaps more of a config problem? best, Steve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?539c60b90810171648m39106b4ao28ffa07ea990a639>