Date: Wed, 10 Jun 1998 11:12:59 -0400 (EDT) From: George Uhl <uhl@mamba-e.gsfc.nasa.gov> To: mitzel@iprg.nokia.com, luigi@labinfo.iet.unipi.it Cc: freebsd-multimedia@FreeBSD.ORG, mitzel@iprg.nokia.com Subject: Re: help configuring GUS MAX under 2.2.6 Message-ID: <199806101512.LAA17757@mamba-e.gsfc.nasa.gov>
next in thread | raw e-mail | index | archive | help
Check the file /usr/src/sys/i386/isa/snd/CARDS to see possible irq, drq and port configurations for your card. George > From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 10 02:33 EDT 1998 > From: Luigi Rizzo <luigi@labinfo.iet.unipi.it> > Subject: Re: help configuring GUS MAX under 2.2.6 > To: mitzel@iprg.nokia.com (Danny J. Mitzel) > Date: Wed, 10 Jun 1998 06:17:02 +0200 (MET DST) > Cc: freebsd-multimedia@FreeBSD.ORG, mitzel@iprg.nokia.com > X-Loop: FreeBSD.org > > > full duplex with no luck. compiling with the the snd0 driver and gus0 > > device reports: gus0 at 0x230 irq 12 drq 1 on isa > > so I tried pcm driver configured as: > > device pcm0 at isa? port 0x230 tty irq 12 drq 1 vector pcmintr > > are you sure the address is correct ? From memory it should be > something like 0x320 or 0x324. Plus, the GUS used to have two DMA > channels, so you might want to specify the second as well through flags > 0x1N where N is the secondary DMA > > luigi > -----------------------------+-------------------------------------- > Luigi Rizzo | Dip. di Ingegneria dell'Informazione > email: luigi@iet.unipi.it | Universita' di Pisa > tel: +39-50-568533 | via Diotisalvi 2, 56126 PISA (Italy) > fax: +39-50-568522 | http://www.iet.unipi.it/~luigi/ > _____________________________|______________________________________ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-multimedia" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199806101512.LAA17757>