Date: Wed, 29 May 2024 13:22:31 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 279381] FreeBSD 13.3-RELEASE breaks isp driver with Qlogic QLE2692 16Gb fibre channel cards Message-ID: <bug-279381-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D279381 Bug ID: 279381 Summary: FreeBSD 13.3-RELEASE breaks isp driver with Qlogic QLE2692 16Gb fibre channel cards Product: Base System Version: 13.3-RELEASE Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: drkspc@mailbox.org Created attachment 251062 --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=3D251062&action= =3Dedit dmesg output for isp0 on FreeBSD 13.3 with firmware loading disabled We have a bunch of Dell servers with Qlogic QLE2692 16Gb FC cards, pulling = in storage from a switched FC network. Upgrading from FreeBSD 13.2 to 13.3 leaves us with all the paths to our multipath devices and thus zpools missing. Debug output as per hint.isp.0.debug=3D"0x70f" in /boot/device.hints looks = like firmware loading is not an issue. However, on 13.3, we get a message isp0: fabric topology, but cannot get info about fabric controller (0x400a) Booting with hint.isp.0.debug=3D"0x71f", this is preceeded by: isp0: Chan 0 handle 0x7fe Port 0xfffffe flags 0x0 curstate 44 laststate 44 as opposed to (13.2): isp0: Chan 0 handle 0x7fe Port 0xfffffe flags 0x0 curstate 4 laststate 4 Rolling back to 13.2 results in all devices/paths showing up properly again. Enabling or disabling firmware loading (hint.isp.0.fwload_disable=3D"0" or = "1") on 13.3 does not make any difference. Using even newer firmware than provid= ed by FreeBSD on the card (9.14.0 from Dell's firmware packages) shows the same effect. In addition to the QLE2692 card, we installed an older QLE2662 16Gb into on= e of the servers, as the updated firmware loading in 13.3 (bug #273263) only aff= ects newer cards. With the older card (isp2 and isp3) everything works as expect= ed. I'll attach the dmesg entries for isp0 (QLE2692) on FreeBSD 13.2 and 13.3 as well as isp3 (QLE2662) on 13.3. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-279381-227>